Manifold Hydraulic / Pneumatic / Outlets 3 Sides / 2 Inlets

Hydraulic manifold blocks. G (PF) thread machining can also be specified.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Type	Material	Surface Treatment	Max. Operating Pressure
BMFRS	Steel for General Structure	Trivalent Chromate	20.6 MPa ≈ 210 kgf/cm² or less
BMFRA	Aluminum Alloy	—	1 MPa ≈ 10 kgf/cm² or less
BMFRAA	Aluminum Alloy	Clear Anodize	1 MPa ≈ 10 kgf/cm² or less

Specification Table

■ Selecting Method
The diameters of J and K are not changeable. When J and K are not needed, specify J0–K0. (This results in the removal of through holes. It is not possible to specify just J or just K as 0.)
[Step 1] Select the most frequently used thread diameter as basic thread diameter.

[Ordering Example] Select 4(1/2).
[Step 2] Select the ports needed to change from the basic thread diameter and the desired thread size.
[Ordering Example] D2-E2-G2-U0-V3-W3
(Ex.)
○ BMFRS4−60−4−J0−K0−D2
○ BMFRS4−60−4 −D2
× BMFRS4−60−4−J0−D2
× BMFRS4−60−4−K0−D2

Part Number	—	A	—	Basic Thread Diameter	—	J	—	K	—	C	—	D	—	E	—	F	—	G	—	H	—	U	—	V	—	W	—	X	—	Y	—	Z
BMFRS4	—	60	—	4							—	D2	—	E2			—	G2			—	U0	—	V3	—	W3
G−BMFRA4	—	30	—	2									—	E1	—	F1			—	H1							—	X1	—	Y1	—	Z1	(G Thread)

Part Number

Block Square
A

Basic Thread Diameter Rc (PT), M (Coarse)

Alternative Thread Size Selection Rc (PT), M (Coarse)

d₁

Type

Number of Circuits

JK (0 only), CDEFGHUVWXYZ

BMFRS
BMFRA
BMFRAA
(Standard
Change: 60N)

2
3
4

5 (M5)

1 (1/8)

0 (No Hole)

5 (M5)

1 (1/8)

4.5

1 (1/8)

2 (1/4)

0 (No Hole)

5 (M5)

1 (1/8)

2 (1/4)

4.5

1 (1/8)

2 (1/4)

0 (No Hole)

5 (M5)

1 (1/8)

2 (1/4)

3 (3/8)

5.5

9.5

5.5

Combination of 3 and 3 is not available at right angles.

2 (1/4)

3 (3/8)

0 (No Hole)

5 (M5)

1 (1/8)

2 (1/4)

3 (3/8)

4 (1/2)

6.5

6.6

6.5

Combination of 4 and 4 is not available at right angles.

2 (1/4)

3 (3/8)

4 (1/2)

0 (No Hole)

5 (M5)

1 (1/8)

2 (1/4)

3 (3/8)

4 (1/2)

6 (3/4)

8.5

Combination of 6 and 6 is not available at right angles.

60N

3 (3/8)

4 (1/2)

6 (3/4)

0 (No Hole)

5 (M5)

1 (1/8)

2 (1/4)

3 (3/8)

4 (1/2)

6 (3/4)

8.5

A=25 is applicable to BMFRA and BMFRAA only, and A=60 to BMFRS only.
For thread diameter selection, specify 0, 5, 1, 2, 3, 4 or 6 indicated before ( ).
For the purposes of improved standardization, the former A dimension 60 has been changed to "60N." The a/b dimension standard of 8 mm was formerly 10 mm. The 10-mm standard will be discontinued in September 2022.
Old: BMFRS-60- New: BMFRS-60N-

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
BMFRAA2-25-[1,5]
BMFRAA2-30-[1,2]
BMFRAA2-35-[1,2]
BMFRAA2-40-[2,3]
BMFRAA2-50-[2,3,4]
BMFRAA3-25-[1,5]
BMFRAA3-30-[1,2]
BMFRAA3-35-[1,2]
BMFRAA3-40-[2,3]
BMFRAA3-50-[2,3,4]
BMFRAA4-25-[1,5]
BMFRAA4-30-[1,2]
BMFRAA4-35-[1,2]
BMFRAA4-40-[2,3]
BMFRAA4-50-[2,3,4]
G-BMFRAA2-25-[1,5]
G-BMFRAA2-30-[1,2]
G-BMFRAA2-35-[1,2]
G-BMFRAA2-40-[2,3]
G-BMFRAA2-50-[2,3,4]
G-BMFRAA3-25-[1,5]
G-BMFRAA3-30-[1,2]
G-BMFRAA3-35-[1,2]
G-BMFRAA3-40-[2,3]
G-BMFRAA3-50-[2,3,4]
G-BMFRAA4-25-[1,5]
G-BMFRAA4-30-[1,2]
G-BMFRAA4-35-[1,2]
G-BMFRAA4-40-[2,3]
G-BMFRAA4-50-[2,3,4]

Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Surface Treatment	Number of Circuits (Circuits)	Block Square A (mm)	Thread Size / Type	Application	Standard Thread Dia. Selection 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) 5 (M5) 6 (3/4)
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	2	25	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	1 ～ 5
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	2	30	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	1 ～ 2
1	9 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	2	35	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	1 ～ 2
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	2	40	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	2 ～ 3
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	2	50	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	2 ～ 4
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	3	25	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	1 ～ 5
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	3	30	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	1 ～ 2
1	9 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	3	35	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	1 ～ 2
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	3	40	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	2 ～ 3
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	3	50	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	2 ～ 4
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	4	25	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	1 ～ 5
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	4	30	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	1 ～ 2
1	9 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	4	35	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	1 ～ 2
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	4	40	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	2 ～ 3
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	4	50	Standard Thread {PT, M (Coarse) Thread}	Pneumatic	2 ～ 4
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	2	25	G (PF) Thread	Pneumatic	1 ～ 5
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	2	30	G (PF) Thread	Pneumatic	1 ～ 2
1	9 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	2	35	G (PF) Thread	Pneumatic	1 ～ 2
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	2	40	G (PF) Thread	Pneumatic	2 ～ 3
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	2	50	G (PF) Thread	Pneumatic	2 ～ 4
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	3	25	G (PF) Thread	Pneumatic	1 ～ 5
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	3	30	G (PF) Thread	Pneumatic	1 ～ 2
1	9 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	3	35	G (PF) Thread	Pneumatic	1 ～ 2
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	3	40	G (PF) Thread	Pneumatic	2 ～ 3
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	3	50	G (PF) Thread	Pneumatic	2 ～ 4
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	4	25	G (PF) Thread	Pneumatic	1 ～ 5
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	4	30	G (PF) Thread	Pneumatic	1 ～ 2
1	9 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	4	35	G (PF) Thread	Pneumatic	1 ～ 2
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	4	40	G (PF) Thread	Pneumatic	2 ～ 3
1	12 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	4	50	G (PF) Thread	Pneumatic	2 ～ 4

Products homepage

Basic information

Shape	Lateral Through Hole, T-Shaped Hole	Pitch Standard / Configurable	Fixed Type

Configure

30Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- EN AW-5052 Equiv.
- Steel for General Structure
Clear
Number of Circuits(Circuits)
- 2
- 3
- 4
Clear
Block Square A(mm)
- 25
- 30
- 35
- 40
- 50
- 60
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, M (Coarse) Thread}
Clear
Application
- For hydraulic / Water Pressure
- Pneumatic
Clear
Standard Thread Dia. Selection 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) 5 (M5) 6 (3/4)
1

2

3

4

5

6
Clear
Type
- BMFRA
- BMFRAA
- BMFRS
- G-BMFRA
- G-BMFRAA
- G-BMFRS
Clear
Surface Treatment
- Not Provided
- Trivalent Chromate
- Clear Anodized Aluminum
Clear
Filter by CAD data type
- 2D
- 3D
Clear