Angular contact ball bearings / Universal combination / Contact angle 15 / MISUMI (B7010SU)

Click on this image to zoom in.

Volume Discount

MISUMI

Product Details:

Manufacturer part number: B7010SU

Brand: MISUMI

Price: 134.89 €

Delivery time: 5 Days

Technical Data:

I.D. d: 50 φ

O.D. D: 80 φ

Width B (or T): 16 mm

Basic Load Rating Cr (Dynamic): 26000 N

Allowable Rotational Speed: 17700 1/min

Order quantities extended (D-JIT)
Stock

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

B7010SU

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Precision Angular Contact/Universal Combination:Related Image

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Ball Bearings

Material: EN 1.3505 Equiv.

For further specifications please see the More information tab.
Information on tolerances and rotational accuracy of the radial bearings can be found in the following PDF: Ball bearing table / tolerances as PDF

Composition of a Product Code - Ball Bearings

Part Number

B7001SU

General Information - Ball Bearings

Ball bearing - deep groove ball bearing - axial bearing - axial ball bearing - axial groove ball bearing - angular ball bearing - spherical ball bearing - tension bearing

Ball Bearing Selection Details

- Ball material: steel, stainless steel, ceramic, plastic, glass, chrome-plated

- Type of bearings: axial ball bearings, thin section bearings, spherical ball bearings, deep groove ball bearings, single-row angular ball bearings, double-row ball bearings, tension bearings, four-point bearings

- Outer ring: flat, spherical, with flange, annular groove, U-groove, V-groove

- Properties: heat-resistant, non-magnetic, corrosion-resistant, dust-proof, vacuum, high speed

- Inner diameter: 2 mm to 50 mm

- Outer diameter: 5 mm to 110 mm

Ball bearing designation (suffix):

In addition to the dimensional designation of the ball bearing, ball bearings often also have a designation for a cover disc or sealing disc. The following names are the most common names of various manufacturers that can be selected in the MISUMI online shop.

- Double-sided sealing washer: 2RSH/2RS1, 2RSR/C-2HRS, DDU/DD
- Single-sided sealing washer: RSH/RS1, RSR/C-HRS, DU
- Double-sided sealing washer with low friction: 2RSL/2RZ/VV
- Double-sided cover disc: 2Z/ZZ, 2ZR/C-2Z
- Single sided cover disc: Z, ZR/C-Z/Z

Description/Basics

Rolling bearings

Rolling bearings are generally divided into ball bearings and roller bearings. Ball bearings are a popular type of rolling bearings due to their high permissible speed and low friction.
In the MISUMI online shop, you can purchase ball bearings that can be customized to your applications and environmental conditions. Our ball bearings are available in different materials and in a combination of different materials (hybrid bearings). In addition, MISUMI offers ball bearings already integrated into the housing as bearing housing.

Grooved ball bearings

Grooved ball bearings are the most commonly used rotary rolling bearings. This type of ball bearing is ideally suited for supporting rotating machine elements. A grooved ball bearings are intended for load bearing of radial forces and light axial forces. Grooved ball bearings are designed for high speeds and are used in a wide variety of industrial applications and designs. MISUMI already offers ball bearings integrated into housings and holders as bearing housings.

Areas of Application

Ball bearing - chemical resistance

Chemical resistance		Plastic ball			Metal ball		Ceramic ball
Bearing rings		UHMW	PEEK	PTFE	EN 1.4125 equivalent	EN 1.4301 equivalent	EN 1.4125 equivalent	EN 1.4542 equivalent
Cover plate		-	-	-	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent
Bearing balls		Glass	Ceramic (aluminum oxide)	Ceramic (aluminum oxide)	EN 1.4125 equivalent	EN 1.4301 equivalent	Ceramic	Ceramic
Ball cage		UHMW	PEEK	PTFE	EN 1.4301 equivalent	EN 1.4301 equivalent	Fluoroplastic	Fluoroplastic
Acids	Hydrochloric acid	suitable to a limited extent	good	very good	unsuitable	good	suitable to a limited extent	good
	Sulfuric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
	Nitric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
Bases		unsuitable	very good	very good	unsuitable	very good	good	very good
Solvents		very good	very good	very good	unsuitable	very good	good	very good
Salt water		very good	very good	very good	unsuitable	very good	good	very good
Water		very good	very good	very good	unsuitable	very good	very good	very good

Comparison Table The ball bearing comparison table is provided for comparison purposes only (consider the lubricant and the sealing washer separately).

Ball bearing materials

In the MISUMI online shop, ball bearings are available in cost-effective rolling bearing steel, corrosion-resistant stainless steel and stainless steel. Furthermore, our product range includes various hybrid bearings in the following combinations: metal & ceramic, plastic & ceramic, plastic & glass.

Our various materials offer good resistance to various environmental influences. Our ball bearing shop includes the ball materials stainless steel, steel, UHMW, PEEK, PTFE, ceramic and glass.

Instructions for Use / Installation Information - Ball Bearings

Installation Information

An incorrect assembly and disassembly can damage a ball bearing. Therefore, a suitable tool must always be used to assemble and disassemble ball bearings or roller bearings.
Ball bearings should not be assembled with a hammer, as this can deform the ball bearing. It is recommended using a suitable press. During pressing, the contact surface can be provided with lubricant to protect the surfaces and facilitate assembly.
It is best to use a bearing puller for disassembly.

Maintenance

The ball bearing in roller bearings should be inspected for damage during maintenance.
Before regreasing, a ball bearing should first be thoroughly cleaned.
Remaining contamination in the bearing can damage the ball bearing. As a rule, a ball bearing should not be completely filled with grease, as this can cause the bearing to heat up too much and can cause it to fail.
For encapsulated and sealed ball bearings, it is recommended to replace the bearing. Maintenance is not recommended due to the risk of damage to the cover place or seal.

Supplementary Article

Bearing Lock Nuts

Shaft nuts - lock nuts - steel shaft nut - stainless steel shaft nut - shaft with retaining nut - shaftnNut with clamp screw - shaft nut with grub screw - shaft assembly

Bearings with Housing

Bearing with housing - bearing housing - bearing units - ball bearing holder - ball bearing with housing - bearing housing with flange - shaft holder with ball bearing

Axles / Rotary Shafts

Rotary axis - offset rotary shaft - double offset shaft - female threaded shaft - keyway shaft

Drive shafts

Motor shaft - torsion shaft - shaft with collar - shaft with shoulder - offset shaft - keyway shaft

Plain Bearing (Bushes)

Plain bearing - maintenance free - plain bearing bushings - plain bearing bushing with collar - plain bearing bushing with flange - plastic bushing - plastic plain bearing bushing

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
B7010SU

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
	134.89 €	1	Available	5 Days	10	50	80	16	26000	17700	21900

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Specification Tables - Ball Bearings

Part Number	d	D	B	r (min)	r₁ (min)	Basic Load Rating		Allowable Rotational Speed rpm (Reference)	Pressure Cone Apex a	Relative Dimensions			Mass (g) (Reference)	Unit Price
Part Number	d	D	B	r (min)	r₁ (min)	Cr (Dynamic) kN	Cor (Static) kN	Allowable Rotational Speed rpm (Reference)	Pressure Cone Apex a	Ds(min.)	dh(max.)	R(max.)	Mass (g) (Reference)	Unit Price
B7000SU	10	26	8	0.3	0.15	5.30	2.49	63900	6.4	12.5	23.5	0.3	19
B7001SU	12	28	8			5.80	2.90	57500	6.7	14.5	25.5		21
B7002SU	15	32	9			6.25	3.40	49000	7.6	17.5	29.5		30
B7003SU	17	35	10			6.60	3.80	44300	8.5	19.5	32.5		39
B7004SU	20	42	12	0.6	0.3	11.10	6.55	37100	10.1	25	37	0.6	67
B7005SU	25	47	12	0.6	0.3	11.70	7.40	32000	10.8	30	42	0.6	78
B7006SU	30	55	13	1.0	0.6	15.10	10.30	27100	12.2	36	49	1.0	114
B7007SU	35	62	14	1		19.10	13.70	23800	13.5	41	56		151
B7008SU	40	68	15			20.60	15.90	21300	14.7	46	62		189
B7009SU	45	75	16			24.40	19.30	19200	16.0	51	69		238
B7010SU	50	80	16			26.00	21.90	17700	16.7	56	74		259

kgf=Nx0.101972

Products homepage

Basic information

Bearing Ring Shape	Angular Contact Ball (Single Row)	Materials of Inner and Outer Ring	EN 1.3505 Equiv.	Shield material and shape	Open Type
Outer Ring Type	Flat	Accuracy (JIS)	Class 4	Specifications/Environment	Standard
Load Direction	Radial	Number of Bearing Ring Rows	Single Track	Size Standard	Metric Series
Rolling Element Material	EN 1.3505 Equiv.	Combination of Angular Contact Ball Bearings	Single Track	Seal Part Structure	Open

This page is Angular contact ball bearings / Universal combination / Contact angle 15 / MISUMI, part number B7010SU.
You can find the detail information about specifications and dimensions on part number B7010SU.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- B7000SU
- B7001SU
- B7002SU
- B7003SU
- B7004SU
- B7005SU
- B7006SU
- B7007SU
- B7008SU
- B7009SU
- B7010SU
Clear
I.D. d(φ)
10

12

15

17

20

25

30

35

40

45

50
Clear
O.D. D(φ)
26

28

32

35

42

47

55

62

68

75

80
Clear
Width B (or T)(mm)
8

9

10

12

13

14

15

16
Clear
Basic Load Rating Cr (Dynamic)(N)
5300

5800

6250

6600

11100

11700

15100

19100

20600

24400

26000
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
B7000SU
B7001SU
B7002SU
B7003SU
B7004SU
B7005SU

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
38.29 €	1	Available	5 Days	10	10	26	8	5300	63900	2490
39.16 €	1	Available	5 Days	10	12	28	8	5800	57500	2900
44.97 €	1	Available	5 Days	10	15	32	9	6250	49000	3400
46.47 €	1	Available	5 Days	10	17	35	10	6600	44300	3800
53.15 €	1	Available	5 Days	10	20	42	12	11100	37100	6550
59.06 €	1	Available	5 Days	10	25	47	12	11700	32000	7400