Locating Pins - Shouldered - Taper Angle, DP Tolerance Selectable, Tapped (Part Numbers)

Volume Discount

MISUMI

[Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a female thread.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Save
Similar products
Product data
CAD data not available

Products homepage

Data to be displayed: 30; 45; 60

Part Number
SKFHTAHH13-P[8-13/0.01]-L[13-26/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHH16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHH20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHM6-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHM6T-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHM8-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHM8T-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHM10-P[7-11/0.01]-L[10-20/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHM12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHM13-P[8-13/0.01]-L[13-26/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHM16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHM20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHP6-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHP6T-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHP8-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHP8T-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHP10-P[7-11/0.01]-L[10-20/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHP12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHP13-P[8-13/0.01]-L[13-26/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHP16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHP20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHS6-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHS6T-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHS8-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHS8T-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHS10-P[7-11/0.01]-L[10-20/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHS12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHS13-P[8-13/0.01]-L[13-26/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHS16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAHS20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMG6-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMG6T-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMG8-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMG8T-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMG10-P[7-11/0.01]-L[10-20/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMG12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMG13-P[8-13/0.01]-L[13-26/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMG16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMG20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMH6-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMH6T-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMH8-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMH8T-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMH10-P[7-11/0.01]-L[10-20/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMH12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMH13-P[8-13/0.01]-L[13-26/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMH16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMH20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMM6-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMM6T-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMM8-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMM8T-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMM10-P[7-11/0.01]-L[10-20/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMM12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMM13-P[8-13/0.01]-L[13-26/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMM16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMM20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMP6-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMP6T-P[4-7/0.01]-L[6-12/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHTAMP8-P[5-9/0.01]-L[8-16/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Surface Treatment	Heat Treatment	[D] Diameter (Mounting Side) (mm)	ISO Tolerance (Mounting Side)	ISO Tolerance (Head)	[M] Diameter (Screw) (mm)	A	B	E	L	P
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	h7	h7	-	15 ～ 60	3 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	h7	h7	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	h7	h7	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	h7	m6	3	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6T	h7	m6	2.6	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	h7	m6	5	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8T	h7	m6	4	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	10	h7	m6	-	15 ～ 60	2 ～ 15	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	12	h7	m6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	h7	m6	-	15 ～ 60	3 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	h7	m6	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	h7	m6	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	h7	p6	3	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6T	h7	p6	2.6	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	h7	p6	5	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8T	h7	p6	4	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	10	h7	p6	-	15 ～ 60	2 ～ 15	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	12	h7	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	h7	p6	-	15 ～ 60	3 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	h7	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	h7	p6	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	h7	0/-0.01	3	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6T	h7	0/-0.01	2.6	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	h7	0/-0.01	5	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8T	h7	0/-0.01	4	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	10	h7	0/-0.01	-	15 ～ 60	2 ～ 15	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	12	h7	0/-0.01	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	h7	0/-0.01	-	15 ～ 60	3 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	h7	0/-0.01	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	h7	0/-0.01	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	m6	g6	3	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6T	m6	g6	2.6	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	m6	g6	5	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8T	m6	g6	4	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	10	m6	g6	-	15 ～ 60	2 ～ 15	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	12	m6	g6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	m6	g6	-	15 ～ 60	3 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	m6	g6	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	m6	g6	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	m6	h7	3	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6T	m6	h7	2.6	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	m6	h7	5	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8T	m6	h7	4	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	10	m6	h7	-	15 ～ 60	2 ～ 15	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	12	m6	h7	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	m6	h7	-	15 ～ 60	3 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	m6	h7	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	m6	h7	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	m6	m6	3	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6T	m6	m6	2.6	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	m6	m6	5	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8T	m6	m6	4	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	10	m6	m6	-	15 ～ 60	2 ～ 15	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	12	m6	m6	-	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	m6	m6	-	15 ～ 60	3 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	m6	m6	-	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	m6	m6	-	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	m6	p6	3	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6T	m6	p6	2.6	15 ～ 60	2 ～ 10	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	m6	p6	5	15 ～ 60	2 ～ 12	0 ～ 10	8 ～ 16	5 ～ 9

Basic information

Type (Basic Shape)	Shouldered	Shape (Head, Outline View)	Round	Shape (Head, Tip View)	Tapered
Shape (Head, Mounting Method)	N/A	Type (Mounting Side)	Internal Thread

Configure

180Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- Steel
  - EN 1.2510 Equiv.
- Stainless Steel
  - EN 1.4037 Equiv.
  - EN 1.4301 Equiv.
Clear
Surface Treatment
- No Treatment
- Hard Chrome Plating
  - Hard Chrome Plating
Clear
[D] Diameter (Mounting Side)(mm)
6

6T

8

8T

10

12

13

16

20
Clear
ISO Tolerance (Mounting Side)
p6

m6

h7

g6
Clear
ISO Tolerance (Head)
p6

m6

h7

g6

0/-0.01
Clear
[M] Diameter (Screw)(mm)
2.6

3

4

5
Clear
A
15

30

45

60
Clear
B
[2-20/0.1]
Clear
E
[0-10/0.1]
Clear
L
[6-40/1]
Clear
P
[4-20/0.01]
Clear
Type
- CKFHTAGG
- CKFHTAGH
- CKFHTAGM
- CKFHTAGP
- CKFHTAGS
- CKFHTAHG
- CKFHTAHH
- CKFHTAHM
- CKFHTAHP
- CKFHTAHS
- CKFHTAMG
- CKFHTAMH
- CKFHTAMM
- CKFHTAMP
- CKFHTAMS
- CKFHTAPG
- CKFHTAPH
- CKFHTAPM
- CKFHTAPP
- CKFHTAPS
- GKFHTAGG
- GKFHTAGH
- GKFHTAGM
- GKFHTAGP
- GKFHTAGS
- GKFHTAHG
- GKFHTAHH
- GKFHTAHM
- GKFHTAHP
- GKFHTAHS
- GKFHTAMG
- GKFHTAMH
- GKFHTAMM
- GKFHTAMP
- GKFHTAMS
- GKFHTAPG
- GKFHTAPH
- GKFHTAPM
- GKFHTAPP
- GKFHTAPS
- KFHTAGG
- KFHTAGH
- KFHTAGM
- KFHTAGP
- KFHTAGS
- KFHTAHG
- KFHTAHH
- KFHTAHM
- KFHTAHP
- KFHTAHS
- KFHTAMG
- KFHTAMH
- KFHTAMM
- KFHTAMP
- KFHTAMS
- KFHTAPG
- KFHTAPH
- KFHTAPM
- KFHTAPP
- KFHTAPS
- SKFHTAGG
- SKFHTAGH
- SKFHTAGM
- SKFHTAGP
- SKFHTAGS
- SKFHTAHG
- SKFHTAHH
- SKFHTAHM
- SKFHTAHP
- SKFHTAHS
- SKFHTAMG
- SKFHTAMH
- SKFHTAMM
- SKFHTAMP
- SKFHTAMS
- SKFHTAPG
- SKFHTAPH
- SKFHTAPM
- SKFHTAPP
- SKFHTAPS
Clear
Heat Treatment
- No Treatment
- Directly Quenched
Clear

Filter by standard shipping days

All

6 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Angles - Resin
MISUMI Shipping Days: -
Centring bushes / collar / brass
MISUMI Shipping Days: 9 Days
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day