Precision Pivot Pin / Extra Low Head Hex Socket with Shoulder / Tapped

Click on this image to zoom in.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information

[New Product]Precision Pivot Pin - Extra Low Hex Socket Head with Shoulder, Tapped: Related Image

[ ! ]There are identification grooves on the side of CLBKM and PCLBKM to be distinguished from Hardened Type.
[ ! ] Relief dimension under the shoulder is for reference.
[ ! ] The dimension tolerances for L, T, and A conform to JIS B 0405 Class m.

Type	[M] Material	[H] Hardness	[S] Surface treatment
CLBKM	EN 1.1191 Equiv.	—	Black Oxide
CLBKHM		40 to 45HRC	Black Oxide
PCLBKM		—	Electroless Nickel Plating
PCLBKHM		40 to 45HRC	Electroless Nickel Plating
GCLBKM		Plating Hardness 750 HV or more	Hard Chrome Plating
SCLBKM	EN 1.4301 Equiv.	—	—
SCLBKHM	EN 1.4037 Equiv	45 to 50HRC	—
GSCLBKHM	EN 1.4037 Equiv	45 to 50HRC Plating Hardness 750 HV or more	Hard Chrome Plating

Specification Table

Part Number	—	L
CLBKM15	—	120.3

D Tolerance (g6)
4 to 6	−0.004 −0.012
8·10	−0.005 −0.014
12 to 18	−0.006 −0.017
20 to 25	−0.007 −0.020

Part Number		L 0.1 mm Increments	A	T	B	E	u	(n)	M (Coarse)
Type	D
CLBKM CLBKHM PCLBKM PCLBKHM GCLBKM SCLBKM SCLBKHM GSCLBKHM	6	15.0 to 100.0	10	1.5	2.5	2	5.8	1.5	M3
	8	20.0 to 100.0	13		3		7.8		M5
	10	25.0 to 100.0	16		4	3	9.8		M6
	12	25.0 to 200.0	18	2.5			11.8
	13	30.0 to 200.0	24				12.8		M8
	14				5		13.8
	15						14.8
	16	35.0 to 200.0					15.8		M10
	17				6	4	16.8		M12
	18						17.8
	20	40.0 to 200.0	27				19.8
	22	50.0 to 200.0			8	5	21.8		M16
	25	55.0 to 200.0	30				24.8

[ ! ] SCLBKHM may be discolored by hardening.

Alterations

Thread Diameter

L Dimension Tolerance

Shoulder Diameter Cut

Code

LKC

Spec.

Ordering Code MC3

D	MC (Selection Range)
6	2.6
8		3	4
10·12			4	5
13 to 15				5	6
16 to 18					6	8
20·22						8	10
25							10	12

Ordering Code LKC

Changes L dimension tolerance to ±0.05.

Ordering Code HC

·D = 6 to 10
HC = A/2−1

·D = 12 to 25
HC = A/2−2

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
CLBKHM6-[15-100/0.1]
CLBKHM8-[20-100/0.1]
CLBKHM10-[25-100/0.1]
CLBKHM12-[25-200/0.1]
CLBKHM13-[30-200/0.1]
CLBKHM14-[30-200/0.1]
CLBKHM15-[30-200/0.1]
CLBKHM16-[35-200/0.1]
CLBKHM17-[35-200/0.1]
CLBKHM18-[35-200/0.1]
CLBKHM20-[40-200/0.1]
CLBKHM22-[50-200/0.1]
CLBKHM25-[55-200/0.1]
GCLBKM6-[15-100/0.1]
GCLBKM8-[20-100/0.1]
GCLBKM10-[25-100/0.1]
GCLBKM12-[25-200/0.1]
GCLBKM13-[30-200/0.1]
GCLBKM14-[30-200/0.1]
GCLBKM15-[30-200/0.1]
GCLBKM16-[35-200/0.1]
GCLBKM17-[35-200/0.1]
GCLBKM18-[35-200/0.1]
GCLBKM20-[40-200/0.1]
GCLBKM22-[50-200/0.1]
GCLBKM25-[55-200/0.1]
GSCLBKHM6-[15-100/0.1]
GSCLBKHM8-[20-100/0.1]
GSCLBKHM10-[25-100/0.1]
GSCLBKHM12-[25-200/0.1]
GSCLBKHM13-[30-200/0.1]
GSCLBKHM14-[30-200/0.1]
GSCLBKHM15-[30-200/0.1]
GSCLBKHM16-[35-200/0.1]
GSCLBKHM17-[35-200/0.1]
GSCLBKHM18-[35-200/0.1]
GSCLBKHM20-[40-200/0.1]
GSCLBKHM22-[50-200/0.1]
GSCLBKHM25-[55-200/0.1]
PCLBKHM6-[15-100/0.1]
PCLBKHM8-[20-100/0.1]
PCLBKHM10-[25-100/0.1]
PCLBKHM12-[25-200/0.1]
PCLBKHM13-[30-200/0.1]
PCLBKHM14-[30-200/0.1]
PCLBKHM15-[30-200/0.1]
PCLBKHM16-[35-200/0.1]
PCLBKHM17-[35-200/0.1]
PCLBKHM18-[35-200/0.1]
PCLBKHM20-[40-200/0.1]
PCLBKHM22-[50-200/0.1]
PCLBKHM25-[55-200/0.1]
SCLBKHM6-[15-100/0.1]
SCLBKHM8-[20-100/0.1]
SCLBKHM10-[25-100/0.1]
SCLBKHM12-[25-200/0.1]
SCLBKHM13-[30-200/0.1]
SCLBKHM14-[30-200/0.1]
SCLBKHM15-[30-200/0.1]
SCLBKHM16-[35-200/0.1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Features, Areas of Application	[D] Shaft Diameter (mm)	Material	Hardness	Surface Treatment	Material Details	L Dimension (mm)
-	1	7 Days	Not Applicable	6	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	15 ～ 100
-	1	7 Days	Not Applicable	8	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	20 ～ 100
-	1	7 Days	Not Applicable	10	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	25 ～ 100
-	1	7 Days	Not Applicable	12	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	25 ～ 200
-	1	7 Days	Not Applicable	13	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	30 ～ 200
-	1	7 Days	Not Applicable	14	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	30 ～ 200
-	1	7 Days	Not Applicable	15	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	30 ～ 200
-	1	7 Days	Not Applicable	16	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	35 ～ 200
-	1	7 Days	Not Applicable	17	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	35 ～ 200
-	1	7 Days	Not Applicable	18	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	35 ～ 200
-	1	7 Days	Not Applicable	20	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	40 ～ 200
-	1	7 Days	Not Applicable	22	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	50 ～ 200
-	1	7 Days	Not Applicable	25	Steel	Hardness Spec-designed	Not Provided	EN 1.1191 Equiv. (S45C)	55 ～ 200
-	1	7 Days	Low Dust	6	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	15 ～ 100
-	1	7 Days	Low Dust	8	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	20 ～ 100
-	1	7 Days	Low Dust	10	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	25 ～ 100
-	1	7 Days	Low Dust	12	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	25 ～ 200
-	1	7 Days	Low Dust	13	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	30 ～ 200
-	1	7 Days	Low Dust	14	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	30 ～ 200
-	1	7 Days	Low Dust	15	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	30 ～ 200
-	1	7 Days	Low Dust	16	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	35 ～ 200
-	1	7 Days	Low Dust	17	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	35 ～ 200
-	1	7 Days	Low Dust	18	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	35 ～ 200
-	1	7 Days	Low Dust	20	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	40 ～ 200
-	1	7 Days	Low Dust	22	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	50 ～ 200
-	1	7 Days	Low Dust	25	Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.1191 Equiv. (S45C)	55 ～ 200
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	6	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	15 ～ 100
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	8	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	20 ～ 100
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	10	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	25 ～ 100
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	12	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	25 ～ 200
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	13	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	30 ～ 200
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	14	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	30 ～ 200
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	15	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	30 ～ 200
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	16	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	35 ～ 200
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	17	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	35 ～ 200
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	18	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	35 ～ 200
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	40 ～ 200
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance / Heat-Resistant	22	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	50 ～ 200
-	1	7 Days	Low Dust / Corrosion and Chemical Resistance	25	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	EN 1.4037 Equiv.	55 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	6	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	15 ～ 100
-	1	7 Days	Corrosion and Chemical Resistance	8	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	20 ～ 100
-	1	7 Days	Corrosion and Chemical Resistance	10	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	25 ～ 100
-	1	7 Days	Corrosion and Chemical Resistance	12	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	25 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	13	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	30 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	14	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	30 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	15	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	30 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	16	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	35 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	17	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	35 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	18	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	35 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	20	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	40 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	22	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	50 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	25	Steel	Hardness Spec-designed	Electroless Nickel Plating	EN 1.1191 Equiv. (S45C)	55 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	6	Stainless Steel	Hardness Spec-designed	Not Provided	EN 1.4037 Equiv.	15 ～ 100
-	1	7 Days	Corrosion and Chemical Resistance	8	Stainless Steel	Hardness Spec-designed	Not Provided	EN 1.4037 Equiv.	20 ～ 100
-	1	7 Days	Corrosion and Chemical Resistance	10	Stainless Steel	Hardness Spec-designed	Not Provided	EN 1.4037 Equiv.	25 ～ 100
-	1	7 Days	Corrosion and Chemical Resistance	12	Stainless Steel	Hardness Spec-designed	Not Provided	EN 1.4037 Equiv.	25 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	13	Stainless Steel	Hardness Spec-designed	Not Provided	EN 1.4037 Equiv.	30 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	14	Stainless Steel	Hardness Spec-designed	Not Provided	EN 1.4037 Equiv.	30 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	15	Stainless Steel	Hardness Spec-designed	Not Provided	EN 1.4037 Equiv.	30 ～ 200
-	1	7 Days	Corrosion and Chemical Resistance	16	Stainless Steel	Hardness Spec-designed	Not Provided	EN 1.4037 Equiv.	35 ～ 200

App. Example

Basic information

Basic Shape	Extra Low Head Hex Socket with Shoulder	RoHS Information	RoHS Requirements Fulfilled	Mounting Method	Tapped
L Dimension Specifying Method	L Dimension Configurable	With or w/o Hex Socket	Provided	Material Certificate	N/A

Configure

65Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Features, Areas of Application
Low Dust

Corrosion and Chemical Resistance

Non-magnetic

Heat-Resistant

Not Applicable
Clear
[D] Shaft Diameter(mm)
6

8

10

12

13

14

15

16

17

18

20

22

25
Clear
Material
- Steel
- Stainless Steel
Clear
Surface Treatment
- Not Provided
- Electroless Nickel Plating
- Hard Chrome Plating
Clear
Material Details
- EN 1.1191 Equiv. (S45C)
- EN 1.4301 Equiv. (SUS304)
- EN 1.4037 Equiv.
Clear
L Dimension(mm)
[15-200/0.1mm Unit(s)]
Clear
Type
- CLBKHM
- CLBKM
- GCLBKM
- GSCLBKHM
- PCLBKHM
- PCLBKM
- SCLBKHM
- SCLBKM
Clear
Hardness
- Not Specified
- Hardness Spec-designed
Clear
Filter by CAD data type
- 2D
- 3D
Clear