TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-The tool shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)
-The rigidity of the tool is emphasized by shortening the flute length and overall length for shrink fit
-Optimal for low to medium speed machining due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
- TS
- General Steel
- 4 Flutes
- B (Stub)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| TSC-SH-EM4B2 |
| TSC-SH-EM4B3 |
| TSC-SH-EM4B4 |
| TSC-SH-EM4B5 |
| TSC-SH-EM4B6 |
| TSC-SH-EM4B8 |
| TSC-SH-EM4B10 |
| TSC-SH-EM4B12 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Geometry | Grip Length L1 (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|
19.07 € | 1 | Available | 5 Days | 2 | 2 | 4 | 40 | With Lead | 31 | 1 | |
24.62 € | 1 | Available | 5 Days | 3 | 3 | 6 | 40 | With Lead | 27 | 1 | |
25.52 € | 1 | Available | 5 Days | 4 | 4 | 6 | 40 | With Lead | 29 | 1 | |
28.15 € | 1 | Available | 5 Days | 5 | 5 | 6 | 40 | With Lead | 31 | 1 | |
26.38 € | 1 | Available | 5 Days | 6 | 6 | 6 | 40 | With Lead | 31 | 2 | |
34.18 € | 1 | Available | 5 Days | 8 | 8 | 8 | 50 | With Lead | 39 | 2 | |
48.62 € | 1 | Available | 5 Days | 10 | 10 | 10 | 60 | With Lead | 47 | 2 | |
66.70 € | 1 | Available | 5 Days | 12 | 12 | 12 | 65 | With Lead | 50 | 2 |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Grip Length L1 |
Figure | |
| Outer Diameter D |
||||||
| TSC-SH-EM4B (Standard) TSC-SH-PEM4B (Sharp Edge) |
2 | 2 | 40 | 4 | 31 | 1 |
| 3 | 3 | 40 | 6 | 27 | 1 | |
| 4 | 4 | 40 | 6 | 29 | 1 | |
| 5 | 5 | 40 | 6 | 31 | 1 | |
| 6 | 6 | 40 | 6 | 31 | 2 | |
| 8 | 8 | 50 | 8 | 39 | 2 | |
| 10 | 10 | 60 | 10 | 47 | 2 | |
| 12 | 12 | 65 | 12 | 50 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
●The blade length and total length are shortened for shrink fitting.
Basic information
| Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 | ● Inventory Product □ Manufacturer Product | ● |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Type
- TSC-SH-EM4B
- TSC-SH-PEM4B
-
Geometry
- Sharp Corner
- With Lead
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.