Número da peça:
candidatos encontrados.Preço unitário (excluindo IVA)(Preço unitário incluindo IVA) | Data de envio standard |
---|
82.40 € ( 98.06 € ) | 5 dias úteis |
86.98 € ( 103.51 € ) | 5 dias úteis |
63.42 € ( 75.47 € ) | 5 dias úteis |
66.72 € ( 79.40 € ) | 5 dias úteis |
101.22 € ( 120.45 € ) | 5 dias úteis |
[Features]
-Long shank, ideal for deep cavity milling
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
Model Number | Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Shank Diameter d |
Figure | |
Tip R |
||||||
TSC-LS-BEM2S | 0.5 | 2 | 1 | 70 | 3 | 1 |
1 | 3 | 2 | 70 | 3 | 1 | |
1.5 | 4 | 3 | 80 | 3 | 2 | |
2 | 6 | 4 | 100 | 4 | 2 | |
2.5 | 8 | 5 | 100 | 6 | 1 | |
3 | 10 | 6 | 140 | 6 | 2 | |
4 | 13 | 8 | 160 | 8 | 2 | |
5 | 15 | 10 | 180 | 10 | 2 | |
6 | 15 | 12 | 200 | 12 | 2 | |
8 | 20 | 16 | 220 | 16 | 2 | |
10 | 25 | 20 | 250 | 20 | 2 | |
12.5 | 30 | 25 | 280 | 25 | 2 |
For Cutting Conditions, Refer to >>Click here.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The long shank model is ideal for machining deep grooves.
[ ! ]The following additional processing services are available for the products on this page.