DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model (DLC-ALRFR5)

Click on this image to zoom in.

Volume Discount

MISUMI

Product Details:

Manufacturer part number: DLC-ALRFR5

Brand: MISUMI

Price: 67.07 €

Delivery time: 5 Days

Technical Data:

Outer Diameter (D): 5 φ

Flute Length (ℓ): 15 mm

Shank Diameter (d): 6 mm

Overall Length (L): 57 mm

Length Under Neck (ℓ1): - mm

DLC
Aluminum
3 Flutes
R (Regular)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

DLC-ALRFR5

Drawing
Part Numbers
Specification and price
Features and examples

DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model:Related Image

Data to be displayed: 30; 45; 60

Part Number
DLC-ALRFR5

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Additional Classification	Tolerance of OD (mm)	Figure	● Inventory Product □ Manufacturer Product
	67.07 €	1	Available	5 Days	5	15	6	57	-	Stocked Product	0 ~ -0.048	1	●

Specifications

DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model:Related Image

Model Number		Flute Length ℓ	Overall Length L	Shank Diameter d	Figure
	Outer Diameter D
	Outer Diameter D
DLC-ALRFR	5	15	57	6	1
	6	15	57	6	2
	8	20	72	8	2
	10	25	72	10	2
	12	30	100	12	2
	16	40	100	16	2
	20	45	100	20	2

For Cutting Conditions, Refer to >>Click here.

More Information

● The DLC coating has excellent wear resistance and deposition resistant properties that make it ideal for machining aluminum.
● The wide pitch and shallow nicks allow the time taken for the rough machining of aluminum to be reduced.
● It has a 3-flute structure for wider chip pockets which discharges chips better, allowing for high-efficiency aluminum machining.

Basic information

Work Material	Aluminum Alloy / Copper Alloy / Resin	Number of Flutes(sheet)	3	Model	Roughing
Coating	DLC	Processing Applications	Flat Surface / Side Surface / Groove / Inclined Cutting	Geometry	Ultra-Small R
Torsion Angle (θ)	Standard Helix (30 to 40°)

This page is DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model, part number DLC-ALRFR5.
You can find the detail information about specifications and dimensions on part number DLC-ALRFR5.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Length Under Neck (ℓ1)(mm)
Clear
Type
- DLC-ALRFR
- SN-DLC-ALRFR
Clear
Outer Diameter (D)(φ)
5

6

8

10

12

16

20
Clear
Flute Length (ℓ)(mm)
15

20

25

30

40

45
Clear
Shank Diameter (d)(mm)
6

8

10

12

16

20
Clear
Overall Length (L)(mm)
57

72

100
Clear
Additional Classification
- Standard Neck Relief
- Stocked Product
Clear

Filter by standard shipping days

All

5 Days or Less

8 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
DLC-ALRFR10
DLC-ALRFR12
DLC-ALRFR16
DLC-ALRFR20
DLC-ALRFR6
DLC-ALRFR8

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Additional Classification	Tolerance of OD (mm)	Figure	● Inventory Product □ Manufacturer Product
107.99 €	1	Available	5 Days	10	25	10	72	-	Stocked Product	0 ~ -0.070	2	●
160.28 €	1	Available	5 Days	12	30	12	100	-	Stocked Product	0 ~ -0.070	2	●
165.07 €	1	Available	5 Days	16	40	16	100	-	Stocked Product	0 ~ -0.070	2	●
235.32 €	1	Available	5 Days	20	45	20	100	-	Stocked Product	0 ~ -0.084	2	●
60.44 €	1	Available	5 Days	6	15	6	57	-	Stocked Product	0 ~ -0.058	2	●
79.58 €	1	Available	5 Days	8	20	8	72	-	Stocked Product	0 ~ -0.058	2	●