Plain bearing bushes with flange / plastic (iglidur) / XFM (Part Numbers - CAD Download)

Promotional pricing ends 31/12/2024
Volume Discount

iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Product specification
Part Numbers
Catalog

iglidur^® X | The Chemical and Temperature Specialist, Flange Bearing (Form F)

Product Information

Up to 150 MPa static
iglidur^® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur^® X is designed for higher speeds than other iglidur^® bearings.
When to use it?
• For pressure loads up to 150 MPa
• For linear movements with stainless steel at high temperatures
• Universal resistance to chemicals
• Temperature resistant from –100 °C to +250 °C in continuous operation (short-term to +315 °C)
• Very low moisture absorption
• High wear resistance over the entire temperature range
When not to use it?
• For very low wear at high loads
►iglidur^® Q
►iglidur^® Z
• For economical underwater applications
►iglidur^® H
►iglidur^® H370
• For edge pressure
►iglidur^® Z
Typical application areas
• Beverage technology
• Woodworking
• Plastic processing industry
• Aerospace engineering
• Cleanroom

Material Properties

General properties	Unit	iglidur^® X	Testing method
Density	g/cm³	1.44
Colour		black
Max. moisture absorption at +23 °C/50 % r.h.	% weight	0.1	DIN 53495
Max. water absorption	% weight	0.5
Coefficient of sliding friction, dynamic, against steel	μ	0.09–0.27
pv value, max. (dry)	MPa · m/s	1.32
Mechanical properties
Flexural modulus	MPa	8,100	DIN 53457
Flexural strength at +20 °C	MPa	170	DIN 53452
Compressive strength	MPa	100
Max. recommended surface pressure (+20 °C)	MPa	150
Shore-D hardness		85	DIN 53505
Physical and thermal properties
Max. long-term application temperature	°C	+250
Max. short-term application temperature	°C	+315
Min. long-term application temperature	°C	–100
Heat conductivity	W/m · K	0.6	ASTM C 177
Coefficient of thermal expansion (at +23 °C)	K^–1 · 10^–5	5	DIN 53752
Electrical properties⁵⁾
Specific contact resistance	Ωcm	< 10⁵	DIN IEC 93
Surface resistance	Ω	< 10³	DIN 53482

5) The good conductivity of this plastic material under certain circumstances can favour the generation of corrosion on the metallic contact components.

Dimensions

Flange Bearing (Form F)

²⁾ Thickness < 1 mm: chamfer = 20°

Chamfer in relation to the d1
d1 [mm]:	Ø 1–6	Ø 6–12	Ø 12–30	Ø > 30
f [mm]:	0.3	0.5	0.8	1.2

Dimensions [mm]

d1	d1-	d2	d3	b1	b2	Part No.
	Tolerance³⁾		d13	h13	–0.14
2.0	+0.006 +0.046	4.0	6.0	3.0	1.0	XFM-020406-03
3.0	+0.006 +0.046	4.5	7.5	5.0	0.75	XFM-0304-05
4.0	+0.010 +0.058	5.5	9.5	4.0	0.75	XFM-0405-04
4.0		5.5	9.5	6.0	0.75	XFM-0405-06
4.0		5.5	8.0	6.0	0.75	XFM-040508-06
5.0		7.0	11.0	5.0	1.0	XFM-0507-05
6.0		8.0	12.0	4.0	1.0	XFM-0608-04
6.0		8.0	12.0	8.0	1.0	XFM-0608-08
6.0		8.0	12.0	10.0	1.0	XFM-0608-10
8.0	+0.013 +0.071	10.0	15.0	5.5	1.0	XFM-0810-05
8.0		10.0	15.0	7.5	1.0	XFM-0810-07
8.0		10.0	15.0	8.0	1.0	XFM-0810-08
8.0		10.0	15.0	9.0	1.0	XFM-0810-09
8.0		10.0	12.0	4.0	1.0	XFM-081012-04
8.0		10.0	14.0	31.5	1.0	XFM-081014-31
9.0		11.0	15.0	18.0	0.5	XFM-0911-18
10.0		12.0	18.0	5.0	1.0	XFM-1012-05
10.0		12.0	18.0	6.0	1.0	XFM-1012-06
10.0		12.0	18.0	7.0	1.0	XFM-1012-07
10.0		12.0	15.0	8.0	1.0	XFM-1012-08
10.0		12.0	18.0	9.0	1.0	XFM-1012-09
10.0		12.0	18.0	12.0	1.0	XFM-1012-12
10.0		12.0	18.0	15.0	1.0	XFM-1012-15
10.0		12.0	18.0	17.0	1.0	XFM-1012-17
10.0		12.0	18.0	18.0	1.0	XFM-1012-18
10.0		12.0	15.0	22.0	1.0	XFM-1012-22
10.0		12.0	18.0	25.0	1.0	XFM-1012-25
12.0	+0.016 +0.086	14.0	20.0	5.5	1.0	XFM-1214-055
12.0		14.0	20.0	7.0	1.0	XFM-1214-07
12.0		14.0	20.0	9.0	1.0	XFM-1214-09
12.0		14.0	20.0	12.0	1.0	XFM-1214-12
12.0		14.0	20.0	15.0	1.0	XFM-1214-15
12.0		14.0	20.0	17.0	1.0	XFM-1214-17
12.0		14.0	18.0	3.9	1.0	XFM-121418-039
12.0	+0.016 +0.086	14.0	18.0	5.9	1.0	XFM-121418-059
14.0		16.0	22.0	10.0	1.0	XFM-1416-10
14.0		16.0	22.0	12.0	1.0	XFM-1416-12
14.0		16.0	22.0	17.0	1.0	XFM-1416-17
15.0		17.0	23.0	6.0	1.0	XFM-1517-06
15.0		17.0	23.0	9.0	1.0	XFM-1517-09
15.0		17.0	23.0	12.0	1.0	XFM-1517-12
15.0		17.0	23.0	17.0	1.0	XFM-1517-17
16.0		18.0	24.0	12.0	1.0	XFM-1618-12
16.0		18.0	24.0	17.0	1.0	XFM-1618-17
18.0		20.0	26.0	12.0	1.0	XFM-1820-12
18.0		20.0	26.0	17.0	1.0	XFM-1820-17
18.0		20.0	26.0	22.0	1.0	XFM-1820-22
20.0	+0.020 +0.104	23.0	30.0	6.5	1.5	XFM-2023-065
20.0		23.0	30.0	7.5	1.5	XFM-2023-075
20.0		23.0	30.0	11.0	1.5	XFM-2023-11
20.0		23.0	30.0	16.5	1.5	XFM-2023-16
20.0		23.0	30.0	21.0	1.5	XFM-2023-21
25.0		28.0	35.0	11.5	1.5	XFM-2528-11
25.0		28.0	35.0	13.5	1.5	XFM-2528-13
25.0		28.0	35.0	16.5	1.5	XFM-2528-16
25.0		28.0	35.0	21.0	1.5	XFM-2528-21
25.0		28.0	33.0	8.0	1.0	XFM-252833-08
27.0		30.0	38.0	20.0	1.5	XFM-2730-20
30.0		34.0	42.0	16.0	2.0	XFM-3034-16
30.0		34.0	42.0	26.0	2.0	XFM-3034-26
30.0		34.0	42.0	40.0	2.0	XFM-3034-40
32.0	+0.025 +0.125	36.0	45.0	15.0	2.0	XFM-3236-15
32.0		36.0	45.0	26.0	2.0	XFM-3236-26
35.0		39.0	47.0	16.0	2.0	XFM-3539-16
35.0		39.0	47.0	26.0	2.0	XFM-3539-26
40.0		44.0	52.0	22.0	2.0	XFM-4044-22
40.0		44.0	52.0	30.0	2.0	XFM-4044-30
40.0		44.0	52.0	40.0	2.0	XFM-4044-40
45.0		50.0	58.0	50.0	2.0	XFM-4550-50
50.0		55.0	63.0	40.0	2.0	XFM-5055-40
60.0	+0.030 +0.150	65.0	73.0	40.0	2.0	XFM-6065-40
70.0		75.0	83.0	40.0	2.0	XFM-7075-40
75.0		80.0	88.0	50.0	2.0	XFM-7580-50

³⁾After press-fit.

Data to be displayed: 30; 45; 60

Part Number
XFM-3034-26
XFM-3034-40
XFM-3236-15
XFM-3236-26
XFM-3539-16
XFM-3539-26
XFM-4044-22
XFM-4044-30
XFM-4044-40
XFM-4550-50
XFM-5055-40
XFM-6065-40
XFM-7075-40
XFM-7580-50

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Type	Inner Diameter d1 (mm)	O.D. d2 (mm)	Overall Length b1 (mm)	Maximum Allowable PV Value Range (N/mm²•m/s)	Max. Allowable Velocity V (m/s)	Recommended Shaft Tolerance	Thickness t (mm)	Operating Temperature Range (°C)	Flange Outer Diameter d3 (mm)
18.94 € 10.04 €	1	Available	Same day Stock	10	-	30	34	15	-	10	-	2	-	-
23.50 €	1	Available	3 Days	-	Flanged Type	30	34	40	1.1 to 2.0	1.5	h9	2	-	42
17.56 €	1	Available	4 Days	-	Flanged Type	32	36	15	1.1 to 2.0	1.5	h9	-	-	45
20.64 € 9.49 €	1	Available	Same day Stock	-	Flanged Type	32	36	26	1.1 to 2.0	1.5	h9	-	-	45
18.50 € 9.81 €	1	Available	Same day Stock	10	-	35	39	15	-	10	-	2	-	-
22.04 €	1	Available	3 Days	10	-	35	39	15	-	10	-	2	-	-
26.24 € 13.91 €	1	Available	Same day Stock	10	-	40	44	15	-	10	-	2	-	-
27.94 €	1	Available	3 Days	-	Flanged Type	40	44	30	1.1 to 2.0	1.5	h9	2	-	52
29.74 €	1	Available	3 Days	-	Flanged Type	40	44	40	1.1 to 2.0	1.5	h9	2	-	52
52.66 €	1	Available	3 Days	-	Flanged Type	45	50	50	1.1 to 2.0	1.5	h9	2.5	-	58
54.92 €	1	Available	4 Days	-	Flanged Type	50	55	40	1.1 to 2.0	1.5	h9	-	-	63
71.58 €	1	Available	3 Days	-	Flanged Type	60	65	40	1.1 to 2.0	1.5	h9	-	-	73
84.46 €	1	Available	5 Days	-	Flanged Type	70	75	40	1.1 to 2.0	1.5	h9	-	-	83
100.50 €	1	Available	5 Days	-	Flanged Type	75	80	50	1.1 to 2.0	1.5	h9	-	-	88

Products homepage

Basic information

Resin Group	High Performance Polymer Group	Environment	Standard / Heat Resistant / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical	Maximum Allowable PV Value(N/mm²·m/s)	1.32
Max. Allowable Surface Pressure P(N/mm²)	150	Recommended Housing Hole Tolerance	H7	Lubrication Condition	Unlubricated

Configure

74Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Type
- Flanged Type
Clear
Inner Diameter d1(mm)
2

3

4

5

6

8

10

12

14

15

16

18

20

25

27

30

32

35

40

45

50

60

70

75
Clear
O.D. d2(mm)
4

4.5

5.5

7

8

10

12

14

16

17

18

20

23

28

30

34

36

39

44

50

55

65

75

80
Clear
Overall Length b1(mm)
3

3.9

4

5

5.5

5.9

6

7.5

8

9

10

11

12

13.5

15

16

16.5

17

18

20

21

22

26

30

31.5

40

50
Clear
Maximum Allowable PV Value Range(N/mm²•m/s)
- 1.1 to 2.0
Clear
Max. Allowable Velocity V(m/s)
1.5

10
Clear
Recommended Shaft Tolerance
- h9
Clear
Thickness t(mm)
1

1.5

2

2.5
Clear
Flange Outer Diameter d3(mm)
6

7.5

8

9.5

11

12

14

15

18

20

22

23

24

26

30

33

35

38

42

45

52

58

63

73

83

88
Clear
Type
- XFM
Clear
Filter by CAD data type
- 2D
- 3D
Clear