Carbide Ball End Mills（work material：High Hardness Steel: to HRC60 Page 2）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

3-Flute Pencil Neck, Ball End (High-Efficacy) FXS-PC-EBT

OSG

In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.

Select to compare

Configure now
Starting from^∗ ：	91.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Ball End (High-Efficacy) FXS-EBT

OSG

Allows high efficiency machining with up to 50% increased table feed due to the ball geometry formed by 3-blades to the center.

Select to compare

Configure now
Starting from^∗ ：	83.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Ball End, High-Cut High-Feed Type PHX-DBT

OSG

New concept ball end mill with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.

Select to compare

Configure now
Starting from^∗ ：	84.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD

OSG

Achieves stable cutting with not only HSK holders but also with L / D large shrink long arbors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck, Ball End CBN-LN-SXB

OSG

2-Flute Long Neck Ball End Type CBN-LN-SXB
-Achieves deep cut milling even with small diameters. Good cutting quality.
With the effect of spiral cutting, both cutting edge strength and sharpness are achieved.
-CBN sintered body is used for flute material.

Select to compare

Configure now
Starting from^∗ ：	110.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6

OSG

High-speed, high-accuracy, high-speed machining Long Neck Ball End Mill that sufficiently exhibits performance of the machining center.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	88.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD

OSG

Long neck ball which has been subjected to WX super coat of super-hard and ultra-heat-resistant. In accordance with the processing shape, freely effective length can be selected.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	57.40 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD

OSG

Long neck ball with choice of effective length according to machining form. High tenacity cemented carbide base material achieves a stable cutting in wide range of machining applications.

Select to compare

Configure now
Starting from^∗ ：	35.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)

UNION TOOL

[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.34 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

HBL, HM Coated 2-Flute Long Shank Ball

UNION TOOL

[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet type

Select to compare

Configure now
Starting from^∗ ：	110.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

HLB, HM Coated 2-Flute Long Neck Ball

UNION TOOL

[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applications

Select to compare

Configure now
Starting from^∗ ：	48.19 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

HTNB HM Coated High-Precision Taper Neck Ball

UNION TOOL

[Features]
· High rigidity realized through an improved taper neck shape.
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
· 65 HRC high hardness materials can also be cut

Select to compare

Configure now
Starting from^∗ ：	69.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SSBL200 CBN Super Speed Long Neck Ball End Mill

NS TOOL

Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools

Select to compare

Configure now
Starting from^∗ ：	166.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SFB200 CBN Super Finish Ball End Mill

NS TOOL

The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

Select to compare

Configure now
Starting from^∗ ：	200.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)

NS TOOL

Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSBH230 2-Flute Ball-End Mill for High-Hardness

NS TOOL

Standard type ball end mill for high hardness. Ideal for finishing

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	31.61 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

NS TOOL

The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

Select to compare

Configure now
Starting from^∗ ：	239.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels

NS TOOL

Large cutting depth can be set, with effective high-speed feed

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	52.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SAGCBE SA Coated Carbide 2-Flute Ball

SANKO MFG

[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· Also capable of high-speed machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	94.66 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

SAGCBELS SA Coated Carbide 2-Flute Ball Long Shank

SANKO MFG

Machining is possible with a wide range of materials, from raw materials to hardened steel. The long shank allows for machining in deep sections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	123.19 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCBE4T SA Coated Carbide 4-Flute Ball

SANKO MFG

Machining is possible with a wide range of materials, from raw materials to hardened steel. 4-flute blade enables high-speed and high-efficiency machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	145.76 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

OKAZAKI SEIKO

Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	101.35 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

One Cut Ball (Slim Shank) DZ-OCUB

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	93.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

One Cut Ball 03 DZ03-OCSB

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Select to compare

Configure now
Starting from^∗ ：	117.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

One Cut Ball Long Type DZ-OCLB-S

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	109.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Special Rounded Shape Bottom Blade, 6-Blade, High-Feed Processing 6PDRS

KYOCERA

The core diameter is large to increase the rigidity. 6-flute specification enables high feed rates.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	109.11 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

CBN 2-Flute Spiral Ball-End Mill SBBE-2

KYOWA SEIKO

Direct carving of high hardness materials and hardened steel.
It is possible to increase the depth of cut.
Machining applications (machining shape): Side face / curved face / engraving / R (radius) groove.

Select to compare

Configure now
Starting from^∗ ：	155.76 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

CBN 2-Flute Spiral Ball-End Mill SBBEF-2

KYOWA SEIKO

Select to compare

Configure now
Starting from^∗ ：	152.07 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

CBN 3-Flute Spiral Ball-End Mill SBBE-3

KYOWA SEIKO

Direct engraving of high-hardness materials and hardened steel. The cutting depth can be increased. Capable of high-efficiency machining at a high feed rate.

Select to compare

Configure now
Starting from^∗ ：	200.09 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Wonder Ball End Mill Two Blades

CREATE TOOL

[Features]
A 2-flute cutter.
It can be used for high hardness steel workpieces.
It has excellent heat resistance due to its carbide material.
[Features]
Suitable for side milling, curved surface milling, engraving and R-slot milling.

Select to compare

Configure now
Starting from^∗ ：	35.71 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

CoroMill Plura, Center Cut, R216.42 (Hardness 43 HRC to 63 HRC)

SANDVIK

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	189.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroMill Plura, Center Cut, R216.42-AC-G-1610 (Hardness 43HRc to 63HRc)

SANDVIK

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	138.53 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Ball End Mill, Center Cut, R216.4 (Hardness 43 HRC to 63 HRC), Cylindrical Shank

SANDVIK

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	125.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)

SANDVIK

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	145.49 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSPBL220 CBN Super Spiral Long Neck Ball End Mill

NS TOOL

[Features]
· Supports deeper milling by utilizing the features of SSPB220 and through the use of a spiral ball shape and strong back taper shape to improve both sharpness and the chipping resistance of cutting edges.

Select to compare

Configure now
Starting from^∗ ：	186.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Single Cut Ball 70 End Mill DH-OCHB Type

DIJET

[Features]
· One mill for roughing to finishing high-hardness material.
· 4-blade solid ball end mill, capable of machining even 70 HRC hardness.
· Reduces chattering by using high tool rigidity and unequal divisions.
· Implements good cutting performance with low resistance, with a torsion angle of 45°.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	105.49 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Special Coat Solid Carbide End Mills For High Hardness (2 Flutes) IC2RBV

THE CUT

[Features]
· The special coating and the abrasion-resistant ultra-fine particle alloy delivers effortless machining of high-hardness materials.
· The use of an eccentric blade type helps improve surface roughness and blade tip strength.
· Suitable for use with high speed machinery.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Solid Carbide Square End Mill For High Hardness (3 Flutes) IC3MBS

THE CUT

[Features]
· Employs a special coating with excellent wear and heat resistance, good smoothness and non-welding properties.
· Can be used for a wide range of machining from raw materials through to difficult-to-cut materials.
· The innovative blade shape, the use of the hardest form of carbide and the special coating all combine to allow for high speeds and high feed rates.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	132.72 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid Carbide Square End Mill For High Hardness (5 Flutes) IC5MBS

THE CUT

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	125.43 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

2-Flutes Short-Shank Ball End Mills HSB-S

UNION TOOL

[Features]
· Can be used for machining at short overhang lengths.

Select to compare

Configure now
Starting from^∗ ：	18.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	SANKO MFG	SANKO MFG	SANKO MFG	OKAZAKI SEIKO	DIJET	DIJET	DIJET	KYOCERA	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	CREATE TOOL	SANDVIK	SANDVIK	SANDVIK	SANDVIK	NS TOOL	DIJET	THE CUT	THE CUT	THE CUT	UNION TOOL
Product Series	3-Flute Pencil Neck, Ball End (High-Efficacy) FXS-PC-EBT	3-Flute Ball End (High-Efficacy) FXS-EBT	3-Flute Ball End, High-Cut High-Feed Type PHX-DBT	For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD	2-Flute Long Neck, Ball End CBN-LN-SXB	2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6	2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD	2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD	HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)	HBL, HM Coated 2-Flute Long Shank Ball	HLB, HM Coated 2-Flute Long Neck Ball	HTNB HM Coated High-Precision Taper Neck Ball	SSBL200 CBN Super Speed Long Neck Ball End Mill	SFB200 CBN Super Finish Ball End Mill	MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)	MSBH230 2-Flute Ball-End Mill for High-Hardness	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels	SAGCBE SA Coated Carbide 2-Flute Ball	SAGCBELS SA Coated Carbide 2-Flute Ball Long Shank	SAGCBE4T SA Coated Carbide 4-Flute Ball	SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated	One Cut Ball (Slim Shank) DZ-OCUB	One Cut Ball 03 DZ03-OCSB	One Cut Ball Long Type DZ-OCLB-S	Special Rounded Shape Bottom Blade, 6-Blade, High-Feed Processing 6PDRS	CBN 2-Flute Spiral Ball-End Mill SBBE-2	CBN 2-Flute Spiral Ball-End Mill SBBEF-2	CBN 3-Flute Spiral Ball-End Mill SBBE-3	Wonder Ball End Mill Two Blades	CoroMill Plura, Center Cut, R216.42 (Hardness 43 HRC to 63 HRC)	CoroMill Plura, Center Cut, R216.42-AC-G-1610 (Hardness 43HRc to 63HRc)	Ball End Mill, Center Cut, R216.4 (Hardness 43 HRC to 63 HRC), Cylindrical Shank	CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)	SSPBL220 CBN Super Spiral Long Neck Ball End Mill	Single Cut Ball 70 End Mill DH-OCHB Type	Special Coat Solid Carbide End Mills For High Hardness (2 Flutes) IC2RBV	Solid Carbide Square End Mill For High Hardness (3 Flutes) IC3MBS	Solid Carbide Square End Mill For High Hardness (5 Flutes) IC5MBS	2-Flutes Short-Shank Ball End Mills HSB-S
Starting from^∗	91.00 € *Unit price with basic configuration	83.96 € *Unit price with basic configuration	84.50 € *Unit price with basic configuration	83.15 € *Unit price with basic configuration Volume Discount	110.50 € *Unit price with basic configuration	88.82 € *Unit price with basic configuration Volume Discount	57.40 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	35.60 € *Unit price with basic configuration	43.34 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	110.99 € *Unit price with basic configuration	48.19 € *Unit price with basic configuration	69.30 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024	166.68 € *Unit price with basic configuration	200.00 € *Unit price with basic configuration	45.91 € *Unit price with basic configuration Volume Discount	31.61 € *Unit price with basic configuration Volume Discount	239.99 € *Unit price with basic configuration	52.58 € *Unit price with basic configuration Volume Discount	94.66 € *Unit price with basic configuration Volume Discount	123.19 € *Unit price with basic configuration Volume Discount	145.76 € *Unit price with basic configuration Volume Discount	101.35 € *Unit price with basic configuration Volume Discount	93.50 € *Unit price with basic configuration Volume Discount	117.74 € *Unit price with basic configuration	109.25 € *Unit price with basic configuration Volume Discount	109.11 € *Unit price with basic configuration Volume Discount	155.76 € *Unit price with basic configuration	152.07 € *Unit price with basic configuration	200.09 € *Unit price with basic configuration	35.71 € *Unit price with basic configuration	189.52 € *Unit price with basic configuration Volume Discount	138.53 € *Unit price with basic configuration Volume Discount	125.79 € *Unit price with basic configuration Volume Discount	145.49 € *Unit price with basic configuration Volume Discount	186.89 € *Unit price with basic configuration	105.49 € *Unit price with basic configuration Volume Discount	28.00 € *Unit price with basic configuration Volume Discount	132.72 € *Unit price with basic configuration Volume Discount	125.43 € *Unit price with basic configuration Volume Discount	18.08 € *Unit price with basic configuration
Min. Shipping Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	Same day	6 Days	7 Days	Same day	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	7 Days	8 Days	9 Days	10 Days	6 Days	6 Days	6 Days	9 Days	8 Days	8 Days	8 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	8 Days	6 Days
Specifications																Stock
R Size(mm)	1 ～ 6	1 ～ 10	0.5 ～ 10	0.5 ～ 6	0.2 ～ 1.5	0.25 ～ 3	0.1 ～ 3	0.1 ～ 3	0.1 ～ 1	1.5 ～ 6	0.4 ～ 3	0.1 ～ 2	0.05 ～ 1	0.1 ～ 1	0.1 ～ 3	0.05 ～ 6	0.01 ～ 0.05	0.1 ～ 3	0.3 ～ 12.5	1.5 ～ 12.5	3 ～ 6	1 ～ 12.5	3 ～ 10	5	2 ～ 12.5	-	0.1 ～ 3	0.1 ～ 1.5	0.5 ～ 3	1.5 ～ 10	1.5 ～ 6	0.5 ～ 6	0.5 ～ 8	0.2 ～ 0.5	0.1 ～ 1	-	0.5 ～ 10	3 ～ 8	3 ～ 8	0.1 ～ 2
Type	Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Tapered neck ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Tapered neck ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball
work material	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]
Blade length (ℓ)(mm)	2 ～ 12	5 ～ 38	1.5 ～ 30	1 ～ 12	0.3 ～ 1.8	0.5 ～ 6	0.16 ～ 4.8	0.16 ～ 4.8	0.3 ～ 6	4.5 ～ 25	0.64 ～ 4.8	0.16 ～ 3.2	0.08 ～ 1.2	0.15 ～ 1.2	0.2 ～ 6	0.1 ～ 20	0.02 ～ 0.1	0.2 ～ 6	0.9 ～ 50	4.5 ～ 80	12 ～ 25	2 ～ 60	9 ～ 30	15	12 ～ 50	4.5 ～ 9	0.2 ～ 3.5	0.2 ～ 2	1 ～ 3.5	3 ～ 30	5 ～ 18	1.5 ～ 22	1 ～ 16	0.3 ～ 1	0.15 ～ 1.2	7.5 ～ 9	2 ～ 40	10 ～ 24	10 ～ 24	0.2 ～ 4
Number of flutes(sheet)	3	3	3	2	2	2	2	2	2	2	2	2	2	2	2	2	1	2	2	2	4	2	2	2	2	6	2	2	3	2	2	2	2 ～ 4	2	2	4	2	3	5	2
Coating	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	-	-	-	For High Hardness (Silicon Group)	Other	Other	Other	Other	Non-Coated	Other	Other	TiAlN	TiAlN	-
Overall Length (L)(mm)	70 ～ 160	50 ～ 160	60 ～ 200	50 ～ 80	45 ～ 50	60 ～ 90	45 ～ 90	45 ～ 120	50 ～ 60	80 ～ 200	45 ～ 80	50 ～ 120	50 ～ 53	50 ～ 52	35 ～ 45	50 ～ 100	50	50 ～ 60	50 ～ 180	100 ～ 230	80 ～ 110	80 ～ 230	120 ～ 180	100	120 ～ 220	57 ～ 83	50 ～ 60	50 ～ 60	50 ～ 60	60 ～ 160	100 ～ 150	57 ～ 83	57 ～ 140	54 ～ 57	51 ～ 53	-	50 ～ 150	80 ～ 150	80 ～ 150	35 ～ 40
Underneck length (ℓ1)(mm)	20 ～ 85	-	-	2.5 ～ 30	2 ～ 15	2.5 ～ 30	0.5 ～ 40	0.5 ～ 50	-	-	3 ～ 30	1.5 ～ 62	0.3 ～ 10	0.5 ～ 5	0.5 ～ 15	-	-	0.5 ～ 15	-	-	-	14 ～ 21	-	-	-	9 ～ 18	-	-	-	-	-	4.5 ～ 15	20	1 ～ 10	0.9 ～ 20	24 ～ 36	-	-	-	-
Shank diameter (d)(mm)	6 ～ 16	4 ～ 20	6 ～ 20	6 ～ 12	4 ～ 6	6	4 ～ 6	4 ～ 6	4	3 ～ 12	4 ～ 6	4 ～ 6	4	4	4 ～ 6	4 ～ 12	4	4 ～ 6	3 ～ 25	3 ～ 25	6 ～ 12	6 ～ 25	5 ～ 18	10	4 ～ 25	6 ～ 12	6	4	6	6 ～ 20	3 ～ 12	6 ～ 12	4 ～ 16	6	-	-	4 ～ 20	6 ～ 16	6 ～ 16	4 ～ 6
R Precision(μm)	-0.015～+0.015	-0.015～+0.015	-0.01～+0.01	-0.01～+0.01	-0.01～+0.01	-0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-0.005～0.005	-0.007～0.007 ～ -0.005～0.005	-0.002～0.002	-0.005～0.005	0.005～-0.005	0.003～-0.003 ～ 0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	-	0.005～-0.005 ～ 0.01～-0.01	0～-0.03	0～-0.03	0～-0.03	-	10～-10	10～-10	10～-10	-	＋0.005～－0.005	＋0.005～－0.005	＋0.005～－0.005	-	-	-	-	-	-0.003 to 0.003	±8	-	-	-	±3
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / R Groove	Curved surface / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface / Engraving / R Groove	Curved surface / R Groove	Curved surface / R Groove	Curved surface / R Groove	-

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

R0.05

0.075

0.1

R0.1

0.125

0.15

R0.15

0.175

0.2

R0.2

0.225

0.25

R0.25

0.275

0.3

R0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

R0.5

0.55

R0.55

0.6

R0.6

0.65

R0.65

0.7

R0.7

0.75

R0.75

0.8

R0.8

0.85

R0.85

0.9

R0.9

0.95

R0.95

1

R1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

R3.75

3.8

3.85

3.9

3.95

4

R4

R 4.0

4.05

4.1

4.15

4.2

4.25

R4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

R5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

R5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

R6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.96
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.32
  - 0.35
  - 0.38
  - 0.4
  - 0.45
  - 0.48
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.64
  - 0.65
  - 0.7
  - 0.72
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
  - 0.96
- 1～1.9
  - 1
  - 1.1
  - 1.12
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.28
  - 1.3
  - 1.4
  - 1.42
  - 1.44
  - 1.45
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.81
  - 3.85
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.7
  - 9
  - 9.5
  - 9.7
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.2
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.7
  - 12
  - 12.5
  - 12.7
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.5
  - 17.9
- 18
- 19
- 20
- 21～21.5
  - 21
  - 21.5
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 27
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

49

50

51

52

53

54

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

115

120

121

125

130

140

150

155

160

170

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.2～0.9
  - 0.2
  - 0.3
  - 0.45
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.75
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.7
  - 2.75
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.8
  - 7
  - 7.5
  - 7.8
- 8～8.5
  - 8
  - 8.
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23.1
- 24
- 25～25.6
  - 25
  - 25.6
- 26～26.8
  - 26
  - 26.8
- 27～27.6
  - 27
  - 27.6
- 28～28.7
  - 28
  - 28.7
- 30
- 31～31.6
  - 31
  - 31.5
  - 31.6
- 32～32.1
  - 32
  - 32.1
- 33～33.6
  - 33
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36～36.1
  - 36
  - 36.1
- 38～38.6
  - 38
  - 38.2
  - 38.6
- 39.5
- 40
- 41～41.4
  - 41
  - 41.2
  - 41.4
- 42～42.2
  - 42
  - 42.2
- 43～43.2
  - 43
  - 43.2
- 44～44.7
  - 44
  - 44.2
  - 44.7
- 45～45.2
  - 45
  - 45.2
- 46～46.7
  - 46
  - 46.5
  - 46.7
- 47.5
- 48～48.9
  - 48
  - 48.7
  - 48.9
- 49
- 50～50.7
  - 50
  - 50.7
- 52
- 54～54.5
  - 54
  - 54.5
- 57
- 58～58.5
  - 58
  - 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61～61.8
  - 61
  - 61.3
  - 61.8
- 62～62.5
  - 62
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7

7.80

7.94

8

9

9.52

9.70

10

11

11.70

12

12.7

14

15

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.008～+0.008

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～0.007

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003 to 0.003

-0.003～+0.003

-0.002～0.002

0～-50

0～-40

0～-0.04

0～-0.03

0 ～−0.02

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±0.07

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10

20～-20
Clear