Registar
Condições de filtragem

Limpar tudo

  • Estoque
  • Tip angle (θ)
    [60-160/1]
  • Tool Diameter (D)(mm)
  • R Size (R)(mm)
  • CAD
  • Chamfering / Centering Tools (página 2)

    Chamfering/countersinking tools are tools used for grinding center holes, positioning holes, grinding holes, or deburring and rounding the edges after side-surface machining. They are attached to machine tools such as drill press, lathe, machining center, etc. Center drills are used to position the initial indentation on the work material to avoid misalignment of the drill bit tip. Their materials include alloy carbide, powdered high-speed steel, cobalt high-speed steel and high-speed steel. Countersinking and chamfering cutters are capable of chamfering after drilling holes. Chamfering cutters with a hole on the tip allow for smooth cutting discharge on soft work materials such as copper and aluminum. Center drills have a 90° tip angle and they can be used for positioning and chamfering at the same time.
    • Tip for Momimen / All C32GUX

        FUJIGEN

        Tip for Momimen / All C32GUX

        Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Chamfering/Horizontal--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---Available / N/ATiAlN / TiN / Non-Coated / AlCrN
        Preço regular (excluindo IVA):
        28.24 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR

          FUJIGEN

          Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR

          Inserts for chamfer cutters / R Cindo cutters / Baitenders.
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Chamfering/Horizontal / Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○]---Available / N/ATiN / Non-Coated
          Preço regular (excluindo IVA):
          11.83 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Corner Radius Cutter 2-Flute
          • VENDA até 23.03.2025
          • Volume Discount

          ATOM

          Corner Radius Cutter 2-Flute

          A high-precision inner rounding cutter for precision machining.
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Round Chamfer-1 ~ 2.5General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Single bladeN/ACarbideN/ANon-Coated
          Preço regular (excluindo IVA):
          75.80 €
          Preço regular (excluindo IVA):
          Preço especial
          Data de envio regular:
          Item em stock - 1 dia útil
          Alguns artigos podem ser enviados no próprio dia
          Configurar
        • 3.175 mm Shank for Pointing Drill Tip 120° Steel

            ATOM

            3.175 mm Shank for Pointing Drill Tip 120° Steel

            Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
            Ler mais
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Centering (Positioning) / Drilling1200.03 ~ 3General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]Single bladeAvailableCarbideN/ANon-Coated
            Preço regular (excluindo IVA):
            55.79 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • 3 mm Shank for Pointing Drill Tip 120° Non-Ferrous / Resin

              ATOM

              3 mm Shank for Pointing Drill Tip 120° Non-Ferrous / Resin

              Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
              Ler mais
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Centering (Positioning) / Drilling1200.03 ~ 3Aluminum[◎] / Resin[◎]Single bladeAvailableCarbideN/ANon-Coated
              Preço regular (excluindo IVA):
              50.86 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Counter Sink Manual Handle

                TRUSCO NAKAYAMA

                Counter Sink Manual Handle

                [Characteristics] Can be used for large diameter countersinks with its manual handle for countersinks. The countersink is tightened with six 3 mm square bars. [Use] Chamfering, burr removal, countersinking.
                Ler mais
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                -----N/A---
                Preço regular (excluindo IVA):
                28.94 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Counter Sink
                • VENDA até 23.03.2025
                • Volume Discount

                TRUSCO NAKAYAMA

                Counter Sink

                [Characteristics] Uses cobalt high speed steel as its base metal for excellent abrasion and heat resistance. Uses a 3-flute blade edge shape for good cutting chip discharge, giving a clean finish. [Application] Work Material: Iron, Cast Material, Stainless Steel. Chamfering. Deburring. Countersinking.
                Ler mais
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                Hole Chamfer90-General Steel[○] / Stainless Steel[○] / Cast Iron[○]Single bladeN/ACobalt HSSN/A-
                Preço regular (excluindo IVA):
                19.85 €
                Preço regular (excluindo IVA):
                Preço especial
                Data de envio regular:
                Item em stock - 1 dia útil
                Envio possível no próprio dia
                Configurar
              • Center Drill, Okabe Standard, Long Center Drill 90°
                • VENDA até 23.03.2025
                • Volume Discount

                NAKAJIMAKOUKI

                Center Drill, Okabe Standard, Long Center Drill 90°

                As it is made of high speed steel, it has a high hardness. It is a centre drill made with one of the best heat treatments, making it suitable for machining general steel.
                Ler mais
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                Centering (Positioning)901 ~ 5General Steel[○]Double-edgedN/AHigh-speed steelN/ANon-Coated
                Preço regular (excluindo IVA):
                58.74 €
                Preço regular (excluindo IVA):
                Preço especial
                Data de envio regular:
                Item em stock - 1 dia útil
                Alguns artigos podem ser enviados no próprio dia
                Configurar
              • Throw-Away Tip for C-Cutter Boy

                  BIG KAISER

                  Throw-Away Tip for C-Cutter Boy

                  [Features]· An economical type with long life that allows 3 corners of the carbide tip to be used
                  Ler mais
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  Chamfering/Horizontal45-General Steel[○] / Cast Iron[○] / Aluminum[○]--CarbideAvailableOther
                  Preço regular (excluindo IVA):
                  11.40 €
                  Data de envio regular:
                  5 dias úteis
                  Configurar
                • Throw-Away Tip for C-Cutter Mini

                    BIG KAISER

                    Throw-Away Tip for C-Cutter Mini

                    Throw-away insert for "C-Cutter Mini" high performance chamfering cutters that achieve ultra-high feed rates and a compact size.
                    Ler mais
                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                    Hole Chamfer / Chamfering/Horizontal--General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]---AvailableOther
                    Preço regular (excluindo IVA):
                    14.64 €
                    Data de envio regular:
                    5 dias úteis
                    Configurar
                  • Disposable Tip for R-Cutter

                      BIG KAISER

                      Disposable Tip for R-Cutter

                      [Features] It can be used for cutters for chamfering curved surfaces. [Features] The coating is carbide and 4 corners can be used.
                      Ler mais
                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                      Round Chamfer45°-General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]Single bladeN/A-AvailableOther
                      Preço regular (excluindo IVA):
                      38.59 €
                      Data de envio regular:
                      10 dias úteis
                      Configurar
                    • Center Boy

                        BIG KAISER

                        Center Boy

                        Accurately positions the drill hole and chamfers at the same time. High-precision throw-away bits with outstanding cutting sharpness. Eliminates the need for bit grinding. Long shank reduces interference with the workpiece.
                        Ler mais
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Centering (Positioning) / Hole Chamfer90 ~ 120-General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AHigh-speed steelAvailableTiN
                        Preço regular (excluindo IVA):
                        106.00 €
                        Data de envio regular:
                        5 dias úteis
                        Configurar
                      • CMC MC Chamfering Cutter G2

                          ASAHI TOOLS

                          CMC MC Chamfering Cutter G2

                          Soldering shape, Angle tolerance ±15'.Shape accuracy with straight edge.Applications, Hole chamfering/bevelling/horizontal run Work material, General steel/heat treated steel/stainless steel/cast iron/aluminium/copper/resinSingle-edged blade2 blades.
                          Ler mais
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer / Chamfering/Horizontal60 ~ 9010 ~ 60General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]Single bladeAvailableCarbideN/ANon-Coated
                          Preço regular (excluindo IVA):
                          113.60 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • Milling Cutter for 60° Chamfering Type N 6711

                            GUHRING

                            Milling Cutter for 60° Chamfering Type N 6711

                            Taper half-angle 30° chamfering milling cutter.
                            Ler mais
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            -604 ~ 12---CarbideAvailableTiAlN
                            Preço regular (excluindo IVA):
                            50.44 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • NC Spotting Drill 90° F723
                            • Volume Discount

                            GUHRING

                            NC Spotting Drill 90° F723

                            Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.
                            Ler mais
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Centering (Positioning) / Hole Chamfer905 ~ 20General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableOther
                            Preço regular (excluindo IVA):
                            108.51 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • Straight Shank, Countersink 3-Flute 90° 1326
                            • Volume Discount

                            GUHRING

                            Straight Shank, Countersink 3-Flute 90° 1326

                            [Features]· Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.· Using A coating achieves a longer life.
                            Ler mais
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Hole Chamfer904.3 ~ 31General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-High-speed steelAvailableTiAlN
                            Preço regular (excluindo IVA):
                            53.80 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • Straight Shank, Countersink 3-Flute 90° 327
                            • Volume Discount

                            GUHRING

                            Straight Shank, Countersink 3-Flute 90° 327

                            Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter. Long product life with TiN coating.
                            Ler mais
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Hole Chamfer905 ~ 31General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-High-speed steelAvailableTiN
                            Preço regular (excluindo IVA):
                            42.81 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • Deburring EW100G 4100

                              GUHRING

                              Deburring EW100G 4100

                              [Features]· A deburring fork for chamfering and deburring of hole entrances and exits.· Internal oil supply type.
                              Ler mais
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Hole Chamfer--General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideN/A-
                              Preço regular (excluindo IVA):
                              851.07 €
                              Data de envio regular:
                              24 dias úteis
                              Configurar
                            • Deburring EW100VR 495

                                GUHRING

                                Deburring EW100VR 495

                                Capable of chamfering and deburring of hole entrances and exits by milling.
                                Ler mais
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer903 ~ 12General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                Preço regular (excluindo IVA):
                                107.57 €
                                Data de envio regular:
                                24 dias úteis
                                Configurar
                              • Cutter for Submarine Gate 20°30° CS-G

                                  YAMAWA MFG

                                  Cutter for Submarine Gate 20°30° CS-G

                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                  Other306 ~ 8-Single bladeN/AHigh-speed steelN/A-
                                  Preço regular (excluindo IVA):
                                  32.65 €
                                  Data de envio regular:
                                  6 dias úteis
                                  Configurar
                                • Umbrella-Type Cutter w/ Handle PCS

                                    EIKOSHA

                                    Umbrella-Type Cutter w/ Handle PCS

                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                    Hole Chamfer60 ~ 9015 ~ 100General Steel[○] / Aluminum[○] / Copper[○]--High-speed steel / Cobalt HSSN/A-
                                    Preço regular (excluindo IVA):
                                    106.30 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Electro-Deposition Router ED-EM

                                      OSG

                                      Electro-Deposition Router ED-EM

                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      --4 ~ 12---CarbideAvailable-
                                      Preço regular (excluindo IVA):
                                      33.77 €
                                      Data de envio regular:
                                      6 dias úteis
                                      Configurar
                                    • CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

                                        SANDVIK

                                        CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                        Chamfering/Horizontal90°8 ~ 12General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeN/ACarbideAvailableOther
                                        Preço regular (excluindo IVA):
                                        116.87 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Back Seat Mini Chamfer (Long Reach 90° Blade)

                                          NOGAJAPAN

                                          Back Seat Mini Chamfer (Long Reach 90° Blade)

                                          [Features]· A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 3.0 mm).· Ideal for machining.· Spiral blade provides smooth sharpness.· A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.
                                          Ler mais
                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                          -903 ~ 12-----TiAlN
                                          Preço regular (excluindo IVA):
                                          96.27 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • Chamfering Cutter NC Spot Drill (Chip)

                                            NINE9

                                            Chamfering Cutter NC Spot Drill (Chip)

                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            -145+90-----AvailableTiAlN
                                            Preço regular (excluindo IVA):
                                            81.34 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar
                                          • Chamfering Reamer (3-Flute) MC

                                              DAIICHITOOL

                                              Chamfering Reamer (3-Flute) MC

                                              [Features] Bevel reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.
                                              Ler mais
                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                              Chamfering/Horizontal60° ~ 90°8 ~ 46General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCobalt HSS--
                                              Preço regular (excluindo IVA):
                                              56.40 €
                                              Data de envio regular:
                                              8 dias úteis
                                              Configurar
                                            • V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

                                                MAKOTOLOY

                                                V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

                                                [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.
                                                Ler mais
                                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                Hole Chamfer / Chamfering/Horizontal601 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideN/A-
                                                Preço regular (excluindo IVA):
                                                93.69 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar
                                              • V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

                                                  MAKOTOLOY

                                                  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

                                                  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.
                                                  Ler mais
                                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling1201 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideN/A-
                                                  Preço regular (excluindo IVA):
                                                  93.69 €
                                                  Data de envio regular:
                                                  8 dias úteis
                                                  Configurar
                                                • V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

                                                    MAKOTOLOY

                                                    V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

                                                    [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.
                                                    Ler mais
                                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                    Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling1203 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideN/A-
                                                    Preço regular (excluindo IVA):
                                                    110.87 €
                                                    Data de envio regular:
                                                    8 dias úteis
                                                    Configurar
                                                  • V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

                                                      MAKOTOLOY

                                                      V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

                                                      [Features]· A small but high quality end mill that can also be used with high precision machining technology.
                                                      Ler mais
                                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                      Hole Chamfer / Chamfering/Horizontal600.3 ~ 0.9General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideN/A-
                                                      Preço regular (excluindo IVA):
                                                      104.69 €
                                                      Data de envio regular:
                                                      8 dias úteis
                                                      Configurar
                                                    • SANDVIK CoroMill Plura Solid Carbide End Mill for Chamfer Milling

                                                        SANDVIK

                                                        SANDVIK CoroMill Plura Solid Carbide End Mill for Chamfer Milling

                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        --3.17 ~ 20General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]-----
                                                        Preço regular (excluindo IVA):
                                                        59.45 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
                                                        • Volume Discount
                                                        • TS
                                                        • General Steel
                                                        • 2 Flutes

                                                        MISUMI

                                                        TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

                                                        Ideal for the Deep Chamfering of Workpieces
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                                                        Preço regular (excluindo IVA):
                                                        48.89 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • TS coated carbide chamfering end mill, 2-flute / 15° spiral
                                                        • Volume Discount
                                                        • TS
                                                        • General Steel
                                                        • 2 Flutes

                                                        MISUMI

                                                        TS coated carbide chamfering end mill, 2-flute / 15° spiral

                                                        [Features] -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                                                        Preço regular (excluindo IVA):
                                                        42.10 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • TS coated carbide chamfering end mill, 2-flute / short model
                                                        • Volume Discount
                                                        • TS
                                                        • General Steel
                                                        • 2 Flutes
                                                        • S (Short)

                                                        MISUMI

                                                        TS coated carbide chamfering end mill, 2-flute / short model

                                                        [Features] -Ideal for chamfering. Can also be used as a deburring tool-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 1203 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                                                        Preço regular (excluindo IVA):
                                                        38.81 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • TS coated carbide chamfering end mill, 3-flute / short model
                                                        • Volume Discount
                                                        • TS
                                                        • General Steel
                                                        • 3 Flutes
                                                        • S (Short)

                                                        MISUMI

                                                        TS coated carbide chamfering end mill, 3-flute / short model

                                                        [Features] -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).-Peripheral grooves allow bevel, contour and spiral cutting-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type-With helix angle on peripheral flutes-Can also be used as a deburring tool-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                                                        Preço regular (excluindo IVA):
                                                        46.59 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • TS coated carbide inner R-cutter, 2-flute
                                                        • Volume Discount
                                                        • TS
                                                        • General Steel
                                                        • 2 Flutes

                                                        MISUMI

                                                        TS coated carbide inner R-cutter, 2-flute

                                                        [Features] Easy high-quality machining of corner radii-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Round Chamfer--General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                                                        Preço regular (excluindo IVA):
                                                        50.04 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • Carbide inner R-cutter, 2-flute
                                                        • Volume Discount
                                                        • Non-Coated
                                                        • General Steel
                                                        • 2 Flutes

                                                        MISUMI

                                                        Carbide inner R-cutter, 2-flute

                                                        Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideN/A-
                                                        Preço regular (excluindo IVA):
                                                        49.42 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade
                                                        • Volume Discount
                                                        • TS
                                                        • SUS
                                                        • 2 Flutes

                                                        MISUMI

                                                        TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

                                                        The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                                                        Preço regular (excluindo IVA):
                                                        74.67 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
                                                        • Volume Discount
                                                        • Non-Coated
                                                        • Aluminum
                                                        • 2 Flutes

                                                        MISUMI

                                                        Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

                                                        The sharp helix blade achieves the clean machined surface with less burr
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A-
                                                        Preço regular (excluindo IVA):
                                                        72.54 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
                                                        • Volume Discount
                                                        • TiCN
                                                        • 2 Flutes
                                                        • S (Short)

                                                        MISUMI

                                                        TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

                                                        The chamfer angle can be selected from 60, 90 and 120°according to the machining style
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 12010 ~ 25General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailablePowder high-speed steelAvailable-
                                                        Preço regular (excluindo IVA):
                                                        57.90 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • High-Speed Steel Chamfering End Mill, 2-Flute / Short
                                                        • Non-Coated
                                                        • 2 Flutes
                                                        • S (Short)

                                                        MISUMI

                                                        High-Speed Steel Chamfering End Mill, 2-Flute / Short

                                                        Chamfering end mill with the angle that can be freely selected in 1° increments
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 16010 ~ 25General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCobalt HSSAvailable / N/ATiCN
                                                        Data de envio regular:
                                                        7 dias úteis
                                                        Configurar
                                                      • TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model
                                                        • Volume Discount

                                                        MISUMI

                                                        TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model

                                                        A single tool with high efficiency that's capable of all centering, chamfering and V grooving
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer60 ~ 1200.5 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]Single bladeAvailableCarbideAvailableTiAlN
                                                        Preço regular (excluindo IVA):
                                                        56.77 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long
                                                        • Volume Discount

                                                        MISUMI

                                                        TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long

                                                        Carbide center drill that's ideal for centering in mass production drilling
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning)-0.5 ~ 5General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]Double-edgedN/ACarbideAvailableTiAlN
                                                        Preço regular (excluindo IVA):
                                                        63.76 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model
                                                        • Volume Discount

                                                        MISUMI

                                                        TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model

                                                        A single tool with high efficiency that's capable of all centering, chamfering and V grooving
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer903 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACobalt HSSAvailableTiAlN
                                                        Preço regular (excluindo IVA):
                                                        23.56 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar
                                                      • TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack
                                                        • Volume Discount

                                                        MISUMI

                                                        TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack

                                                        TiAlN coated type of the popular spot drill
                                                        Ler mais
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer902 ~ 12General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACobalt HSSAvailableTiAlN
                                                        Preço regular (excluindo IVA):
                                                        13.03 €
                                                        Data de envio regular:
                                                        5 dias úteis
                                                        Configurar