Stepping Motors

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All 4 Days or Less 6 Days or Less 8 Days or Less 13 Days or Less 15 Days or Less 18 Days or Less 20 Days or Less

?* Information on days to ship and prices

Built-in Controller Stepping Motor "SSA-TR Series"

SHINANO KENSHI

<Features>
● An input pulse is not required as the motor, driver and controller are integrated into the motor flange size.
● It is easy to set the operation with the included dedicated application.
● Various operations can be programmed in 8 tables.
● Micro step division (1, 2, 4, 16) selectable from 4 levels.
● Design with special bracket for high heat dissipation.
<Applications>
● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.), positioning and constant rotation control.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	197.39 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Stepping Motor for Units

ORIENTAL MOTOR

This is a single motor (component) of the stepper motor unit.

Select to compare

Configure now
Starting from^∗ ：	241.03 €
Min. Shipping Days ：	18 Days

*Unit price with basic configuration

Stepper Motor, AZ Series

ORIENTAL MOTOR

[Features]
・ Equipped with a newly developed ABZO sensor
・ No external sensor required
・ Reduction of origin return time
・ No battery required
・ Energy saving and low heat generation
・ Three drivers to choose from to match your system configuration
・ Easy operation that can be realized with the data setting software MEXE02

Select to compare

Configure now
Starting from^∗ ：	312.42 €
Min. Shipping Days ：	13 Days

*Unit price with basic configuration

Step Motor Controller, JXCE1 / 91 / P1 / D1 / L1 Series

SMC

· EtherCAT, PROFINET, EtherNet/IPTM, DeviceNetTM and IO-Link compatible.
· Compatible actuators: LEY/LEYG, LEFS/LEFB, LES/LESH, LER, LEL, LEP, LEH, LEM.
· Dual communication port IN/OUT (not for JXCL1. For JXCD1, transition wiring is possible using a branch connector).
· Two types of operation command: step no. defined operation and numerical data defined operation.

Select to compare

Configure now
Starting from^∗ ：	404.06 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stepper motor (85000)

NORELEM

· Size acc. to NEMA

· High increment angle accuracy of 1.8°

· With wire connection

· Up to 50 °C ambient temperature without forced ventilation

· High efficiency ratio

Select to compare

Configure now
Starting from^∗ ：	113.13 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Microstep Driver Integrated Controller and Stepping Motor Set CSA-UP Series

SHINANO KENSHI

Various operations can be programed in 8 tables

[Features]
· Integrated controller function for small and lightweight drivers.
· Various operations can be programed in 8 tables.
· 4 levels of micro step division (1, 2, 4, 16) selectable.
· Home return operation possible with origin sensor input.
· Easy setting with the included dedicated application.
· Input power supply: DVC24V.
Error output function.
· Abundant protection functions (excess heating, voltage and current).

Select to compare

Configure now
Starting from^∗ ：	218.09 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Servo Screwdriver & Stepper Motor Set CSB-BZ Series

SHINANO KENSHI

● Closed loop servo drive
● Low noise, low vibration, and low heat generation across the entire speed range
● Thin DIN rail mounted driver
● 4-stage resolution settings (500, 1,000, 5,000, 10,000 p/r)
● Various Protection Functions
● Input Power Supply: 24 VDC
● The speed filter enables smooth acceleration and deceleration
● Easy 6-stage gain settings

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	489.80 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Stepper motor with positioning control (85000)

NORELEM

· Size acc. to NEMA

· High increment angle accuracy of 1.8°

· With integrated positioning control

· Up to 50 °C ambient temperature without forced ventilation

· High efficiency ratio

Select to compare

Configure now
Starting from^∗ ：	891.11 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

5-Phase Micro step driver and stepping motor set CSA-UB series

SHINANO KENSHI

5 phase equivalency at with 2 phases at low cost

[Features]
· 2 phase motor achieving resolution equivalent to a 5 phase motor at low cost.
· A maximum 25,600 divisions per revolution (minimum step angle: 0.0140625°).
· Choose from 16 levels (1 to 128).
· 16 step current setting: 0 to 3.0A (Max).
· With forward rotation / reverse rotation limit input.
· Auto power down function

Select to compare

Configure now
Starting from^∗ ：	171.17 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

High output micro step driver and stepping motor set CSA-BB series

SHINANO KENSHI

Maximum high output: 48V, 6A

[Features]
· Maximum input voltage 48V, high power micro step driver with 6A maximum current.
· A maximum 3,200 divisions per revolution (minimum step angle: 0.1125°).
· Choose from 5 levels (1, 2, 4, 8, 16).
· 16 step current setting: 0 to 6A (Max).
· Stop current setting function.
· Protection function (excess heat and voltage protection).

Select to compare

Configure now
Starting from^∗ ：	179.47 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Built-in Speed Controller Stepping Motor "SSA-VR Series"

SHINANO KENSHI

<Features>
● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.
● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.
● Abnormal rotation detection and automatic recovery are possible with the motor alone.
● Speed control is made simple with analog input.
● Wide speed control range (0 to 1800r/min).
<Applications>
● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.

Select to compare

Configure now
Starting from^∗ ：	257.47 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit

SHINANO KENSHI

Various operations can be programed in 8 tables

[Features]
· Integrated controller function for small and lightweight drivers.
· Various operations can be programed in 8 tables.
· 4 levels of micro step division (1, 2, 4, 16) selectable.
· Home return operation possible with origin sensor input.
· Easy setting with the included dedicated application.
· Input power supply: DC24V.
· Error output function.
· Abundant protection functions (excess heating, voltage and current).

Select to compare

Configure now
Starting from^∗ ：	281.92 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Two-shaft simultaneous drive speed controller and stepping motor two-unit set CSA-UT series

SHINANO KENSHI

[Features]
· Simultaneous 2 motors operation with one controller.
· Oscillator (pulse generator) built in.
· All motor operations can be set at numeric values.
· Equipped with 2 speed setting function (internal setting value / external analog input).
· Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)
· Acceleration / deceleration setting: 0 to 99.99 seconds.
· Current setting: 0 to 2.00A.
· Continuous reciprocating rotation.
· Stall detection function (input feedback time).
· Lightweight and compact design: W70XH90XD33 mm, 190 g.

Select to compare

Configure now
Starting from^∗ ：	331.30 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit

SHINANO KENSHI

[Features]
· Simultaneous 2 motors operation with one controller.
· Oscillator (pulse generator) built in.
· All motor operations can be set at numeric values.
· Equipped with 2 speed setting function (internal setting value / external analog input).
· Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.
· Acceleration / deceleration setting: 0 to 99.99 seconds.
· Current setting: 0 to 2.00A.
· Continuous reciprocating rotation.
· Stall detection function (input feedback time).
· Lightweight and compact design: W70 × H90 × D33 mm, 190 g.

Select to compare

Configure now
Starting from^∗ ：	393.69 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Type
Square flange dimensions A(mm)
Power Supply
Voltage Specifications
Control method
Step angle(°)
Holding torque (classification)(N·m)
Reduction Gear
Driving mode
Backlash(°)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	SHINANO KENSHI	ORIENTAL MOTOR	ORIENTAL MOTOR	SMC	NORELEM	SHINANO KENSHI	SHINANO KENSHI	NORELEM	SHINANO KENSHI	SHINANO KENSHI	SHINANO KENSHI	SHINANO KENSHI	SHINANO KENSHI	SHINANO KENSHI
Product Series	Built-in Controller Stepping Motor "SSA-TR Series"	Stepping Motor for Units	Stepper Motor, AZ Series	Step Motor Controller, JXCE1 / 91 / P1 / D1 / L1 Series	Stepper motor (85000)	Microstep Driver Integrated Controller and Stepping Motor Set CSA-UP Series	Servo Screwdriver & Stepper Motor Set CSB-BZ Series	Stepper motor with positioning control (85000)	5-Phase Micro step driver and stepping motor set CSA-UB series	High output micro step driver and stepping motor set CSA-BB series	Built-in Speed Controller Stepping Motor "SSA-VR Series"	Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit	Two-shaft simultaneous drive speed controller and stepping motor two-unit set CSA-UT series	2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit
CAD	2D / 3D						2D / 3D
Starting from^∗	197.39 € *Unit price with basic configuration	241.03 € *Unit price with basic configuration	312.42 € *Unit price with basic configuration	404.06 € *Unit price with basic configuration	113.13 € *Unit price with basic configuration	218.09 € *Unit price with basic configuration	489.80 € *Unit price with basic configuration	891.11 € *Unit price with basic configuration	171.17 € *Unit price with basic configuration	179.47 € *Unit price with basic configuration	257.47 € *Unit price with basic configuration	281.92 € *Unit price with basic configuration	331.30 € *Unit price with basic configuration	393.69 € *Unit price with basic configuration
Min. Shipping Days	8 Days	18 Days	13 Days	4 Days	4 Days	8 Days	8 Days	4 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days
Type	Motor / Set Product	Motor Unit	Driver Unit / Motor Unit	-	-	Set Product	Set Product	-	Set Product	Set Product	Motor	Set Product	Set Product	Set Product
Square flange dimensions A(mm)	28 ～ 60	60	60 ～ 90	-	-	28 ～ 60	42 ～ 60	-	28 ～ 60	42 ～ 86	42 ～ 56.4	28 ～ 60	28 ～ 42	28 ～ 60
Power Supply	Two-phase	-	Single-Phase ～ Single-phase/ Three-phase	-	-	Two-phase	Two-phase	-	Two-phase	Two-phase	Two-phase	Two-phase	Two-phase	Two-phase
Voltage Specifications	DC Specifications	DC Specifications / 200 AC Specification	DC Specifications / 200 AC Specification	-	-	DC Specifications	DC Specifications	-	DC Specifications	DC Specifications	DC Specifications	DC Specifications	DC Specifications	DC Specifications
Control method	Open loop	Open loop	Closed Loop	-	-	Open loop	Closed Loop	-	-	-	Open loop	Open loop	Open loop	Open loop
Step angle(°)	0.18 ～ 1.8	0.012 ～ 0.36	0.36	-	-	1.8	-	-	1.8	1.8	0.18 ～ 1.8	1.8	-	-
Holding torque (classification)(N·m)	0.1 or Less ～ Up to 0.9	Up to 2 ～ Up to 4	Up to 0.3 ～ Up to 30	-	-	0.1 or Less ～ Up to 3	Up to 0.4 ～ Up to 1.3	-	0.1 or Less ～ Up to 3	Up to 0.3 ～ Up to 10	Up to 0.9	0.1 or Less ～ Up to 3	Up to 0.2 ～ Up to 0.5	0.1 or Less ～ Up to 3
Reduction Gear	N/A / Available	N/A / Available	N/A / Available	-	-	N/A / Available	N/A	-	N/A	N/A	N/A / Available	N/A / Available	N/A	N/A / Available
Driving mode	Unipolar	-	Bipolar	-	-	Unipolar	-	-	Unipolar	Bipolar	Unipolar	Unipolar	Unipolar	Unipolar
Backlash(°)	2	0.17	0.17 ～ 0.75	-	-	-	-	-	-	-	2	-	-	-