Indexing Plungers（Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  Spring latches with flange for surface mounting / GN 722.2

  GANTER

  Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
  Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring latches with flange for surface mounting

  GANTER

  Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°.
  A lock notch will hold the latch in both positions.
  Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger - PBY

  NABEYA BI-TECH

  [Features]
  · An indexing plunger with an integrated mounting flange.
  · Suitable for mounting equipment and devices on walls etc.
  ·Pull out the knob and rotate 90° to lock with the pin in a retracted state.
  ·To unlock, pull the knob out slightly and rotate it 90°.
  · Returns to its original position via the action of the integrated spring.
  · For mounting, please use commercially available hex socket bolts, etc.
  · Using slotted holes allows you to adjust the position after mounting.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.05 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Plungers

  TOSHIN CASTER

  Simple, sturdy structure for easy, safe locking/unlocking. Optimal for equipment that performs positioning or height adjustment.
  
  [Features]
  - Lever-type indexing plunger with simple structure, high strength, and safe design.
  - When locked, the design prevents it from coming off due to accidental shock or contact.
  - When unlocked, the lever can be pulled up, retracted, and retained on the opposite side.
  - Whether locked or unlocked, the lever will not get in the way.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Plungers, Mini Indexes, Basic Type

  HALDER

  [Features]
  · Small index bolts are particularly well suited for mounting to thin objects.
  · On items with hold mechanisms, pull out the knob and rotate it 30° to hold.
  · Operating temperature range: -30 to 80°C.
  · Mounting method: screw in the screw area on the main body, then lift up the knob and use the hexagonal section to tighten it.
  · Increased screw size.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring bolts, Steel / Plastic knob

  GANTER

  The plunger of the spring bolts GN 313 does not protrude in the inoperative position.
  It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
  Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Mini indexing plungers

  GANTER

  Stainless Steel-Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
  Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type CN, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers / Push Type

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers / Plate Mount

  MISUMI

  [Features] It can be used in places where there is no space for a knob.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	87.53 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers, PBX

  NABEYA BI-TECH

  Indexing plungers integrated with a mounting flange. Suitable for mounting to panel surfaces on equipment/devices, etc.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers with T-Handle

  GANTER

  Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
  This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
  Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, Stainless Steel / Plastic knob

  GANTER

  Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
  Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers / without rest position / GN 617

  GANTER

  The indexing plungers GN 617 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers with red knob / GN 817

  GANTER

  Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers, removable / GN 817.8

  GANTER

  Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
  If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
  The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers / Press Fit

  MISUMI

  [Features] Indexing plunger Press-fit type. Please drive it in from the top of the press-fit collar.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.33 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers / Resin Knob

  MISUMI

  [Features] The pin can be pushed in and out manually with a knob or lever. Suitable for temporary positioning of workpieces.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PXVS

  NABEYA BI-TECH

  [Features]
  - Stainless steel.
  - Superior corrosion resistance.
  - Turn the lever to control the pin insertion.
  - Retractable into the body with a 180° turn of the lever.
  - Lever can be locked with a notch machined in the main body.
  - Ergonomic lever cap attached to the PXVS-B/BK.
  - Nickel plating for good abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	79.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-5

  KONISHI MFG

  Indexing plungers with a grip ball attached to the knob.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Locating Bushing For Index Plungers And Bolts

  HALDER

  [Features] This is a bush for index bolts. [Material] Steel, nitrided.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mounting Block For Index Plungers And Bolts

  HALDER

  [Features]
  · Can be used for mounting external diameter screw M12, M16 and M20 index bolts, and for expanding their applications.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Manual Handles, for positioning clamping pins

  HALDER

  The manual handle enables an easy and fast operation of the positioning clamping pin.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.54 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Locking plungers, Plunger protruded

  GANTER

  If not operated, the plunger of the locking plungers GN 816 protrudes. To retract, move against the spring force and hold in the end position by turning by 90°.
  The shape of the cam curve secures the plunger against accidental operation.
  When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
  For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, covered indexing mechanism / with and without rest position

  GANTER

  Mini indexing plungers GN 822.6 are distinguished for their small dimensions.
  Based on the principle of the GN 822 mini indexing plungers, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, covered indexing mechanism

  GANTER

  Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  With Type C the knob can be turned by 30° and a notch keeps the knob in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers / with rest position / GN 617.1

  GANTER

  Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers with long plastic knob

  GANTER

  Stainless Steel-Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
  Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Spring latches with flange for surface mounting

  GANTER

  Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
  Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  PMT.101 - Indexing plungers -Rest position SUPER-technopolymer body

  ELESA

  Indexing plungers with rest in retracted position with threaded body in glass fibre reinforced polyamide-based SUPER-technopolymer, plunger in hardened and burnished steel or AISI 303 stainless steel, knob in high-resilience polyamide-based technopolymer in black or red RAL 3000, spring in stainless steel AISI 302 and locking nut in glass fibre reinforced polyamide-based SUPER-technopolymer.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  PMT.200 - Lever indexing plungers -Rest position SUPER-technopolymer body

  ELESA

  Lever indexing plungers with rest in retracted position with threaded body in glass fibre reinforced polyamide-based SUPER-technopolymer, plunger in hardened and burnished steel or AISI 303 stainless steel, glass fibre reinforced polyamide-based self-lubricating technopolymer lever, AISI 302 stainless steel spring and fibre reinforced polyamide-based SUPER-technopolymer locking nut.
  They are used when a rapid backward movement of the plunger is required.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.91 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PHY

  NABEYA BI-TECH

  Compact indexing plunger.
  
  [Features]
  - A compact indexing plunger.
  - Pull the knob and rotate 30° to lock with the pin retracted.
  - To unlock, pull the knob slightly and rotate 30°.
  - Returns to its original position via internal spring action.
  - Lock mechanism built into the knob.
  - Overall length is the same as a PHX without a lock mechanism.
  - Pin is nickel-plated for good abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers, PMY

  NABEYA BI-TECH

  Simple-structure indexing plungers. Excellent cost performance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PXX

  NABEYA BI-TECH

  Indexing or positioning pin. Good abrasion resistance.
  
  [Features]
  - Indexing or positioning pin.
  - New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
  - Use a locking service for fixing indexing plungers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.55 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers, PXY

  NABEYA BI-TECH

  The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers, PCV

  NABEYA BI-TECH

  Index plungers with pins incorporated into the main body. The pins move in and out by turning the lever.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	66.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PXV

  NABEYA BI-TECH

  Turn the lever to control pin insertion on the indexing plunger.
  
  [Features]
  - Pin retracts into the body with a 180° turn of the lever.
  - Lever can be locked with a notch machined in the main body.
  - Ergonomic lever cap attached to the PXV-B/BK.
  - Hardened pin for good abrasion resistance.
  - PXV-A and PXV-B have no lock nut.
  - PXV-AK and PXV-BK have a lock nut for fixing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers Simple Ring Type IPR

  KONISHI MFG

  Pulling the ring retracts the center pin; releasing it returns the center pin to its original position by using the force of the spring. Can be used to calculate and select the position of jigs.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Bolt With Hexagon Collar, Short

  HALDER

  [Features]
  · For index holes.
  · This index bolt is characterized by its small size.
  · Pull the knob and rotate 90 degrees to fix the pin in place in a withdrawn state using the notch (type with hold mechanism).
  · Operating temperature range is from -30 to +80°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.55 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel, with red knob

  GANTER

  Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, covered indexing mechanism, with red knob

  GANTER

  Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  With type C the knob can be turned by 30° and a notch keeps the knob in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers / Flanged

  MISUMI

  [Features] The presence of the flange makes it possible to adjust the position in the left and right directions.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.15 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PHX

  NABEYA BI-TECH

  [Features]
  - Compact indexing plunger.
  - Metal part unexposed after mounting.
  - Nickel-plated pin.
  - Superior abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.15 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PLX

  NABEYA BI-TECH

  Two types of standardized stroke for each pin diameter. For indexing or positioning.
  
  [Features]
  - Two types of standardized stroke for each pin diameter (except for ⌀10 and ⌀12).
  - For indexing or positioning.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PXZ

  NABEYA BI-TECH

  [Features]
  - All main body threads can be embedded in equipment; only the knob is exposed.
  - Attractive look.
  - Hardened (steel) or nickel-plated (stainless steel).
  - Superior abrasion resistance.
  - New standardization for PXZS-Z and PXZS-SK with stainless steel knob.
  - Use a locking service for fixing indexing plungers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-1

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.25 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...