Cutting punches / cylindrical head / dowel pin bore / stepped / HW
- FLANGE
- SKD11
- HW
- PUNCH&RETAINER SET
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Tip shape | B (Tip length) | D (Shank diameter) (mm) | P (Tip dimension) (mm) | L (L dimension) (mm) | LC (Full length alteration) (mm) | PC (Tip dimension alteration) (mm) | R (Tip corner R) (mm) | W (Tip dimension) (mm) | WC (Tip dimension alteration) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | A | L | 10 | 3 ～ 9.99 | 50 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | L | 10 | - | 50 ～ 150 | - | 1.5 ～ 2.99 | - | - | - | ||
| 1 | Quote | 10 | A | L | 10 | 3 ～ 9.99 | - | 25 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | L | 10 | - | - | 25 ～ 149.9 | 1.5 ～ 2.99 | - | - | - | ||
| 1 | Quote | 10 | A | L | 13 | 6 ～ 12.99 | 50 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | L | 13 | - | 50 ～ 150 | - | 3 ～ 5.99 | - | - | - | ||
| 1 | Quote | 10 | A | L | 13 | 6 ～ 12.99 | - | 25 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | L | 13 | - | - | 25 ～ 149.9 | 3 ～ 5.99 | - | - | - | ||
| 1 | Quote | 10 | A | L | 16 | 10 ～ 15.99 | 60 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | L | 16 | - | 60 ～ 150 | - | 5 ～ 9.99 | - | - | - | ||
| 1 | Quote | 10 | A | L | 16 | 10 ～ 15.99 | - | 25 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | L | 16 | - | - | 25 ～ 149.9 | 5 ～ 9.99 | - | - | - | ||
| 1 | Quote | 10 | A | L | 20 | 13 ～ 19.99 | 60 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | L | 20 | - | 60 ～ 150 | - | 6.5 ～ 12.99 | - | - | - | ||
| 1 | Quote | 10 | A | L | 20 | 13 ～ 19.99 | - | 25 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | L | 20 | - | - | 25 ～ 149.9 | 6.5 ～ 12.99 | - | - | - | ||
| 1 | Quote | 10 | A | L | 25 | 18 ～ 24.99 | 60 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | L | 25 | - | 60 ～ 150 | - | 9 ～ 17.99 | - | - | - | ||
| 1 | Quote | 10 | A | L | 25 | 18 ～ 24.99 | - | 25 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | L | 25 | - | - | 25 ～ 149.9 | 9 ～ 17.99 | - | - | - | ||
| 1 | Quote | 10 | A | S | 10 | 3 ～ 9.99 | 40 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | S | 10 | - | 40 ～ 150 | - | 1.5 ～ 2.99 | - | - | - | ||
| 1 | Quote | 10 | A | S | 10 | 3 ～ 9.99 | - | 25 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | S | 10 | - | - | 25 ～ 149.9 | 1.5 ～ 2.99 | - | - | - | ||
| 1 | Quote | 10 | A | S | 13 | 6 ～ 12.99 | 40 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | S | 13 | - | 40 ～ 150 | - | 3 ～ 5.99 | - | - | - | ||
| 1 | Quote | 10 | A | S | 13 | 6 ～ 12.99 | - | 25 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | S | 13 | - | - | 25 ～ 149.9 | 3 ～ 5.99 | - | - | - | ||
| 1 | Quote | 10 | A | S | 16 | 10 ～ 15.99 | 40 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | S | 16 | - | 40 ～ 150 | - | 5 ～ 9.99 | - | - | - | ||
| 1 | Quote | 10 | A | S | 16 | 10 ～ 15.99 | - | 25 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | S | 16 | - | - | 25 ～ 149.9 | 5 ～ 9.99 | - | - | - | ||
| 1 | Quote | 10 | A | S | 20 | 13 ～ 19.99 | 40 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | S | 20 | - | 40 ～ 150 | - | 6.5 ～ 12.99 | - | - | - | ||
| 1 | Quote | 10 | A | S | 20 | 13 ～ 19.99 | - | 25 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | S | 20 | - | - | 25 ～ 149.9 | 6.5 ～ 12.99 | - | - | - | ||
| 1 | Quote | 10 | A | S | 25 | 18 ～ 24.99 | 40 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | S | 25 | - | 40 ～ 150 | - | 9 ～ 17.99 | - | - | - | ||
| 1 | Quote | 10 | A | S | 25 | 18 ～ 24.99 | - | 25 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | S | 25 | - | - | 25 ～ 149.9 | 9 ～ 17.99 | - | - | - | ||
| 1 | Quote | 10 | A | X | 10 | 6 ～ 9.99 | 70 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | X | 10 | - | 70 ～ 150 | - | 3 ～ 5.99 | - | - | - | ||
| 1 | Quote | 10 | A | X | 10 | 6 ～ 9.99 | - | 37 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | X | 10 | - | - | 37 ～ 149.9 | 3 ～ 5.99 | - | - | - | ||
| 1 | Quote | 10 | A | X | 13 | 6 ～ 12.99 | 70 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | X | 13 | - | 70 ～ 150 | - | 3 ～ 5.99 | - | - | - | ||
| 1 | Quote | 10 | A | X | 13 | 6 ～ 12.99 | - | 37 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | X | 13 | - | - | 37 ～ 149.9 | 3 ～ 5.99 | - | - | - | ||
| 1 | Quote | 10 | A | X | 16 | 10 ～ 15.99 | 80 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | X | 16 | - | 80 ～ 150 | - | 5 ～ 9.99 | - | - | - | ||
| 1 | Quote | 10 | A | X | 16 | 10 ～ 15.99 | - | 37 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | X | 16 | - | - | 37 ～ 149.9 | 5 ～ 9.99 | - | - | - | ||
| 1 | Quote | 10 | A | X | 20 | 13 ～ 19.99 | 80 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | X | 20 | - | 80 ～ 150 | - | 6.5 ～ 12.99 | - | - | - | ||
| 1 | Quote | 10 | A | X | 20 | 13 ～ 19.99 | - | 37 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | X | 20 | - | - | 37 ～ 149.9 | 6.5 ～ 12.99 | - | - | - | ||
| 1 | Quote | 10 | A | X | 25 | 18 ～ 24.99 | 80 ～ 150 | - | - | - | - | - | ||
| 1 | Quote | 10 | A | X | 25 | - | 80 ～ 150 | - | 9 ～ 17.99 | - | - | - | ||
| 1 | Quote | 10 | A | X | 25 | 18 ～ 24.99 | - | 37 ～ 149.9 | - | - | - | - | ||
| 1 | Quote | 10 | A | X | 25 | - | - | 37 ～ 149.9 | 9 ～ 17.99 | - | - | - |
Loading...
Basic information
| Heavy-load punches | No | Shank type | Single-stepped | Jector | None |
|---|---|---|---|---|---|
| Material | SKD11 Equivalent | Surface treatment | HW coating | Shank (mounting part) shape | With locating dowel hole |
| Shank diameter D tolerance | m5 | T (Head thickness/plate thickness)(mm) | 5 |
Configure
Basic Attributes
-
B (Tip length)
- L
- S
- X
-
D (Shank diameter)(mm)
- 10
- 13
- 16
- 20
- 25
-
P (Tip dimension)(mm)
-
L (L dimension)(mm)
-
LC (Full length alteration)(mm)
-
PC (Tip dimension alteration)(mm)
-
R (Tip corner R)(mm)
-
W (Tip dimension)(mm)
-
WC (Tip dimension alteration)(mm)
-
Type
- HW-SPAL-C
- HW-SPAS-C
- HW-SPAX-C
- HW-SPDL-C
- HW-SPDS-C
- HW-SPDX-C
- HW-SPEL-C
- HW-SPES-C
- HW-SPEX-C
- HW-SPGL-C
- HW-SPGS-C
- HW-SPGX-C
- HW-SPRL-C
- HW-SPRS-C
- HW-SPRX-C
-
Tip shape
- A
- D
- R
- E
- G
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.