Ejector pins / cylindrical head / EN 1.3343 Equiv. / stepped / tip diameter, length configurable

Click on this image to zoom in.

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
EHSF1-[40-150/0.01]-P[0.3-0.9/0.01]-N[15-135/1]
EHSF1.1-[40-200/0.01]-P[0.6-1/0.01]-N[15-185/1]
EHSF1.2-[40-200/0.01]-P[0.6-1.1/0.01]-N[15-185/1]
EHSF1.3-[40-200/0.01]-P[0.6-1.2/0.01]-N[15-185/1]
EHSF1.4-[40-200/0.01]-P[0.6-1.3/0.01]-N[15-185/1]
EHSF1.5-[40-200/0.01]-P[0.6-1.4/0.01]-N[15-185/1]
EHSF1.6-[40-250/0.01]-P[0.8-1.5/0.01]-N[15-235/1]
EHSF1.7-[40-250/0.01]-P[0.8-1.6/0.01]-N[15-235/1]
EHSF1.8-[40-250/0.01]-P[0.8-1.7/0.01]-N[15-235/1]
EHSF1.9-[40-250/0.01]-P[0.8-1.8/0.01]-N[15-235/1]
EHSF2-[40-300/0.01]-P[0.8-1.9/0.01]-N[15-250/1]
EHSF2.5-[40-300/0.01]-P[0.8-2.4/0.01]-N[15-250/1]
EHSF3-[40-350/0.01]-P[1-2.9/0.01]-N[15-300/1]
EHSF3.5-[40-350/0.01]-P[1.5-3.4/0.01]-N[15-300/1]
EHSF4-[40-350/0.01]-P[1.5-3.9/0.01]-N[15-300/1]
EHSF4.5-[40-350/0.01]-P[2.5-4.4/0.01]-N[15-300/1]
EHSF5-[40-350/0.01]-P[3-4.9/0.01]-N[15-330/1]
EHSF5.5-[40-350/0.01]-P[3.5-5.4/0.01]-N[15-330/1]
EHSF6-[40-350/0.01]-P[4-5.9/0.01]-N[15-330/1]
EHSF6.5-[40-350/0.01]-P[4.5-6.4/0.01]-N[15-330/1]
EHSF7-[40-350/0.01]-P[4.9-6.9/0.01]-N[15-330/1]
EHSF8-[40-350/0.01]-P[5.9-7.9/0.01]-N[15-330/1]
EHSF9-[40-350/0.01]-P[6.9-8.9/0.01]-N[15-330/1]
EHSF10-[40-350/0.01]-P[7.9-9.9/0.01]-N[15-330/1]
EHSF12-[40-350/0.01]-P[8.9-11.9/0.01]-N[15-300/1]
EHSFE1-[40-150/0.01]-P[0.3-0.9/0.01]-N[15-135/1]
EHSFE1.1-[40-200/0.01]-P[0.6-1/0.01]-N[15-185/1]
EHSFE1.2-[40-200/0.01]-P[0.6-1.1/0.01]-N[15-185/1]
EHSFE1.3-[40-200/0.01]-P[0.6-1.2/0.01]-N[15-185/1]
EHSFE1.4-[40-200/0.01]-P[0.6-1.3/0.01]-N[15-185/1]
EHSFE1.5-[40-200/0.01]-P[0.6-1.4/0.01]-N[15-185/1]
EHSFE1.6-[40-250/0.01]-P[0.8-1.5/0.01]-N[15-235/1]
EHSFE1.7-[40-250/0.01]-P[0.8-1.6/0.01]-N[15-235/1]
EHSFE1.8-[40-250/0.01]-P[0.8-1.7/0.01]-N[15-235/1]
EHSFE1.9-[40-250/0.01]-P[0.8-1.8/0.01]-N[15-235/1]
EHSFE2-[40-300/0.01]-P[0.8-1.9/0.01]-N[15-250/1]
EHSFE2.5-[40-300/0.01]-P[0.8-2.4/0.01]-N[15-250/1]
EHSFE3-[40-350/0.01]-P[1-2.9/0.01]-N[15-300/1]
EHSFE3.5-[40-350/0.01]-P[1.5-3.4/0.01]-N[15-300/1]
EHSFE4-[40-350/0.01]-P[1.5-3.9/0.01]-N[15-300/1]
EHSFE4.5-[40-350/0.01]-P[2.5-4.4/0.01]-N[15-300/1]
EHSFE5-[40-350/0.01]-P[3-4.9/0.01]-N[15-330/1]
EHSFE5.5-[40-350/0.01]-P[3.5-5.4/0.01]-N[15-330/1]
EHSFE6-[40-350/0.01]-P[4-5.9/0.01]-N[15-330/1]
EHSFE6.5-[40-350/0.01]-P[4.5-6.4/0.01]-N[15-330/1]
EHSFE7-[40-350/0.01]-P[4.9-6.9/0.01]-N[15-330/1]
EHSFE8-[40-350/0.01]-P[5.9-7.9/0.01]-N[15-330/1]
EHSFE9-[40-350/0.01]-P[6.9-8.9/0.01]-N[15-330/1]
EHSFE10-[40-350/0.01]-P[7.9-9.9/0.01]-N[15-330/1]
EHSFE12-[40-350/0.01]-P[8.9-11.9/0.01]-N[15-300/1]
EHSJF4-[50-350/0.01]-P[1.5-3.9/0.01]-N[30-300/1]
EHSJF4.5-[50-350/0.01]-P[2.5-4.4/0.01]-N[30-300/1]
EHSJF5-[50-350/0.01]-P[3-4.9/0.01]-N[30-330/1]
EHSJF5.5-[50-350/0.01]-P[3.5-5.4/0.01]-N[30-330/1]
EHSJF6-[50-350/0.01]-P[4-5.9/0.01]-N[30-330/1]
EHSJF6.5-[50-350/0.01]-P[4.5-6.4/0.01]-N[30-330/1]
EHSJF7-[50-350/0.01]-P[4.9-6.9/0.01]-N[30-330/1]
EHSJF8-[50-350/0.01]-P[5.9-7.9/0.01]-N[30-330/1]
EHSJF9-[50-350/0.01]-P[6.9-8.9/0.01]-N[30-330/1]
EHSJF10-[50-350/0.01]-P[7.9-9.9/0.01]-N[30-330/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Tip diameter tolerance (Reference tolerance)	Head thickness	D (Shaft diameter) (mm)	P (Tip diameter) (mm)	Type	L (L dimension) (mm)	N (mm)
-	1	Quote	10	0/-0.005	4mm(T4)	1	0.3 ～ 0.9	Standard type	40 ～ 150	15 ～ 135
-	1	Quote	10	0/-0.005	4mm(T4)	1.1	0.6 ～ 1	Standard type	40 ～ 200	15 ～ 185
-	1	Quote	10	0/-0.005	4mm(T4)	1.2	0.6 ～ 1.1	Standard type	40 ～ 200	15 ～ 185
-	1	Quote	10	0/-0.005	4mm(T4)	1.3	0.6 ～ 1.2	Standard type	40 ～ 200	15 ～ 185
-	1	Quote	10	0/-0.005	4mm(T4)	1.4	0.6 ～ 1.3	Standard type	40 ～ 200	15 ～ 185
-	1	Quote	10	0/-0.005	4mm(T4)	1.5	0.6 ～ 1.4	Standard type	40 ～ 200	15 ～ 185
-	1	Quote	10	0/-0.005	4mm(T4)	1.6	0.8 ～ 1.5	Standard type	40 ～ 250	15 ～ 235
-	1	Quote	10	0/-0.005	4mm(T4)	1.7	0.8 ～ 1.6	Standard type	40 ～ 250	15 ～ 235
-	1	Quote	10	0/-0.005	4mm(T4)	1.8	0.8 ～ 1.7	Standard type	40 ～ 250	15 ～ 235
-	1	Quote	10	0/-0.005	4mm(T4)	1.9	0.8 ～ 1.8	Standard type	40 ～ 250	15 ～ 235
-	1	Quote	10	0/-0.005	4mm(T4)	2	0.8 ～ 1.9	Standard type	40 ～ 300	15 ～ 250
-	1	Quote	10	0/-0.005	4mm(T4)	2.5	0.8 ～ 2.4	Standard type	40 ～ 300	15 ～ 250
-	1	Quote	10	0/-0.005	4mm(T4)	3	1 ～ 2.9	Standard type	40 ～ 350	15 ～ 300
-	1	Quote	10	0/-0.005	4mm(T4)	3.5	1.5 ～ 3.4	Standard type	40 ～ 350	15 ～ 300
-	1	Quote	10	0/-0.005	4mm(T4)	4	1.5 ～ 3.9	Standard type	40 ～ 350	15 ～ 300
-	1	Quote	10	0/-0.005	4mm(T4)	4.5	2.5 ～ 4.4	Standard type	40 ～ 350	15 ～ 300
-	1	Quote	10	0/-0.005	4mm(T4)	5	3 ～ 4.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	0/-0.005	4mm(T4)	5.5	3.5 ～ 5.4	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	0/-0.005	4mm(T4)	6	4 ～ 5.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	0/-0.005	4mm(T4)	6.5	4.5 ～ 6.4	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	0/-0.005	4mm(T4)	7	4.9 ～ 6.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	0/-0.005	4mm(T4)	8	5.9 ～ 7.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	0/-0.005	4mm(T4)	9	6.9 ～ 8.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	0/-0.005	4mm(T4)	10	7.9 ～ 9.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	0/-0.005	4mm(T4)	12	8.9 ～ 11.9	Standard type	40 ～ 350	15 ～ 300
-	1	Quote	10	-0.01/-0.02	4mm(T4)	1	0.3 ～ 0.9	Standard type	40 ～ 150	15 ～ 135
-	1	Quote	10	-0.01/-0.02	4mm(T4)	1.1	0.6 ～ 1	Standard type	40 ～ 200	15 ～ 185
-	1	Quote	10	-0.01/-0.02	4mm(T4)	1.2	0.6 ～ 1.1	Standard type	40 ～ 200	15 ～ 185
-	1	Quote	10	-0.01/-0.02	4mm(T4)	1.3	0.6 ～ 1.2	Standard type	40 ～ 200	15 ～ 185
-	1	Quote	10	-0.01/-0.02	4mm(T4)	1.4	0.6 ～ 1.3	Standard type	40 ～ 200	15 ～ 185
-	1	Quote	10	-0.01/-0.02	4mm(T4)	1.5	0.6 ～ 1.4	Standard type	40 ～ 200	15 ～ 185
-	1	Quote	10	-0.01/-0.02	4mm(T4)	1.6	0.8 ～ 1.5	Standard type	40 ～ 250	15 ～ 235
-	1	Quote	10	-0.01/-0.02	4mm(T4)	1.7	0.8 ～ 1.6	Standard type	40 ～ 250	15 ～ 235
-	1	Quote	10	-0.01/-0.02	4mm(T4)	1.8	0.8 ～ 1.7	Standard type	40 ～ 250	15 ～ 235
-	1	Quote	10	-0.01/-0.02	4mm(T4)	1.9	0.8 ～ 1.8	Standard type	40 ～ 250	15 ～ 235
-	1	Quote	10	-0.01/-0.02	4mm(T4)	2	0.8 ～ 1.9	Standard type	40 ～ 300	15 ～ 250
-	1	Quote	10	-0.01/-0.02	4mm(T4)	2.5	0.8 ～ 2.4	Standard type	40 ～ 300	15 ～ 250
-	1	Quote	10	-0.01/-0.02	4mm(T4)	3	1 ～ 2.9	Standard type	40 ～ 350	15 ～ 300
-	1	Quote	10	-0.01/-0.02	4mm(T4)	3.5	1.5 ～ 3.4	Standard type	40 ～ 350	15 ～ 300
-	1	Quote	10	-0.01/-0.02	4mm(T4)	4	1.5 ～ 3.9	Standard type	40 ～ 350	15 ～ 300
-	1	Quote	10	-0.01/-0.02	4mm(T4)	4.5	2.5 ～ 4.4	Standard type	40 ～ 350	15 ～ 300
-	1	Quote	10	-0.01/-0.02	4mm(T4)	5	3 ～ 4.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	-0.01/-0.02	4mm(T4)	5.5	3.5 ～ 5.4	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	-0.01/-0.02	4mm(T4)	6	4 ～ 5.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	-0.01/-0.02	4mm(T4)	6.5	4.5 ～ 6.4	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	-0.01/-0.02	4mm(T4)	7	4.9 ～ 6.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	-0.01/-0.02	4mm(T4)	8	5.9 ～ 7.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	-0.01/-0.02	4mm(T4)	9	6.9 ～ 8.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	-0.01/-0.02	4mm(T4)	10	7.9 ～ 9.9	Standard type	40 ～ 350	15 ～ 330
-	1	Quote	10	-0.01/-0.02	4mm(T4)	12	8.9 ～ 11.9	Standard type	40 ～ 350	15 ～ 300
-	1	Quote	10	0/-0.005	6mm(JIS)	4	1.5 ～ 3.9	Standard type	50 ～ 350	30 ～ 300
-	1	Quote	10	0/-0.005	6mm(JIS)	4.5	2.5 ～ 4.4	Standard type	50 ～ 350	30 ～ 300
-	1	Quote	10	0/-0.005	6mm(JIS)	5	3 ～ 4.9	Standard type	50 ～ 350	30 ～ 330
-	1	Quote	10	0/-0.005	6mm(JIS)	5.5	3.5 ～ 5.4	Standard type	50 ～ 350	30 ～ 330
-	1	Quote	10	0/-0.005	6mm(JIS)	6	4 ～ 5.9	Standard type	50 ～ 350	30 ～ 330
-	1	Quote	10	0/-0.005	6mm(JIS)	6.5	4.5 ～ 6.4	Standard type	50 ～ 350	30 ～ 330
-	1	Quote	10	0/-0.005	6mm(JIS)	7	4.9 ～ 6.9	Standard type	50 ～ 350	30 ～ 330
-	1	Quote	10	0/-0.005	8mm(JIS)	8	5.9 ～ 7.9	Standard type	50 ～ 350	30 ～ 330
-	1	Quote	10	0/-0.005	8mm(JIS)	9	6.9 ～ 8.9	Standard type	50 ～ 350	30 ～ 330
-	1	Quote	10	0/-0.005	8mm(JIS)	10	7.9 ～ 9.9	Standard type	50 ～ 350	30 ～ 330

Products homepage

Basic information

Material	EN 1.3343 Equiv.	Shaft diameter tolerance (Reference tolerance)	0/-0.02	Surface treatment	No
Tip shape	No	Character engraving type	No	Number of engraving characters	No
Gas release shape	No	Technical Standard	JIS

Configure

80Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Tip diameter tolerance (Reference tolerance)
- 0/-0.005
- -0.01/-0.02
Clear
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
Clear
D (Shaft diameter)(mm)
0.5

0.6

0.7

0.8

0.9

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8

9

10

12
Clear
P (Tip diameter)(mm)
[0.3-11.9/0.01mm Unit(s)][0.3-1.1/0.005mm Unit(s)]
Clear
Type
- Small diameter type
- Standard type
Clear
L (L dimension)(mm)
[30-350/0.01mm Unit(s)]
Clear
N(mm)
[15-330/1mm Unit(s)]
Clear
Type
- EHSF
- EHSFE
- EHSJF
- EHSJFE
- EHYF
Clear
Filter by CAD data type
- 2D
- 3D
Clear