Core pins with ejector sleeves / steel / nitrided / set

Click on this image to zoom in.

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
ESJS-D4-[80-200/0.01]-V[1.5,2,2.5]-X[100-300/0.01]-F[50-299/0.01]-A[0.7-2.49/0.01]-E[0.7-2.49/0.01]-C[0.1-1/0.1]
ESJS-D4.5-[80-200/0.01]-V[1.5,2,2.5]-X[100-300/0.01]-F[50-299.5/0.01]-A[1-2.49/0.01]-E[1-2.49/0.01]-C[0.1-0.7/0.1]
ESJS-D5-[80-275/0.01]-V[2,2.5,3]-X[100-375/0.01]-F[50-374/0.01]-A[1-2.99/0.01]-E[1-2.99/0.01]-C[0.1-1/0.1]
ESJS-D5.5-[80-275/0.01]-V[2,2.5,3]-X[100-375/0.01]-F[50-374/0.01]-A[1-2.99/0.01]-E[1-2.99/0.01]-C[0.1-1/0.1]
ESJS-D6-[80-400/0.01]-V[2,2.5,3,3.5,4]-X[100-500/0.01]-F[50-499/0.01]-A[1-3.99/0.01]-E[1-3.99/0.01]-C[0.1-1/0.1]
ESJS-D6.5-[80-400/0.01]-V[2,2.5,3,3.5,4]-X[100-500/0.01]-F[50-499/0.01]-A[1-3.99/0.01]-E[1-3.99/0.01]-C[0.1-1/0.1]
ESJS-D7-[80-400/0.01]-V[2,2.5,3,3.5,4,4.5]-X[100-500/0.01]-F[50-499/0.01]-A[1-4.49/0.01]-E[1-4.49/0.01]-C[0.1-1/0.1]
ESJS-D7.5-[80-325/0.01]-V[3,3.5,4,4.5]-X[100-425/0.01]-F[50-424/0.01]-A[1.5-4.49/0.01]-E[1.5-4.49/0.01]-C[0.1-1/0.1]
ESJS-D8-[80-400/0.01]-V[2-5/0.5]-X[100-500/0.01]-F[50-499/0.01]-A[2-4.99/0.01]-E[2-4.99/0.01]-C[0.1-1/0.1]
ESJS-D8-[80-400/0.01]-V[3,3.5,4,4.5,5]-X[100-500/0.01]-F[50-499/0.01]-A[2-4.99/0.01]-E[2-4.99/0.01]-C[0.1-1/0.1]
ESJS-D10-[80-400/0.01]-V[4,4.5,5,5.5,6,6.5]-X[100-500/0.01]-F[50-499/0.01]-A[2-6.49/0.01]-E[2-6.49/0.01]-C[0.1-1/0.1]
ESJS-D12-[80-400/0.01]-V[4-8.5/0.5]-X[100-500/0.01]-F[50-499/0.01]-A[2-8.49/0.01]-E[2-8.49/0.01]-C[0.1-1/0.1]
ESNS-D4-[80-200/0.01]-V[1.5,2,2.5]-X[100-300/0.01]-F[50-299/0.01]-A[0.7-2.49/0.01]-E[0.7-2.49/0.01]-C[0.1-1/0.1]
ESNS-D4.5-[80-200/0.01]-V[1.5,2,2.5]-X[100-300/0.01]-F[50-299.5/0.01]-A[1-2.49/0.01]-E[1-2.49/0.01]-C[0.1-0.7/0.1]
ESNS-D5-[80-275/0.01]-V[2,2.5,3]-X[100-375/0.01]-F[50-374/0.01]-A[1-2.99/0.01]-E[1-2.99/0.01]-C[0.1-1/0.1]
ESNS-D5.5-[80-275/0.01]-V[2,2.5,3]-X[100-375/0.01]-F[50-374/0.01]-A[1-2.99/0.01]-E[1-2.99/0.01]-C[0.1-1/0.1]
ESNS-D6-[80-400/0.01]-V[2,2.5,3,3.5,4]-X[100-500/0.01]-F[50-499/0.01]-A[1-3.99/0.01]-E[1-3.99/0.01]-C[0.1-1/0.1]
ESNS-D6.5-[80-400/0.01]-V[2,2.5,3,3.5,4]-X[100-500/0.01]-F[50-499/0.01]-A[1-3.99/0.01]-E[1-3.99/0.01]-C[0.1-1/0.1]
ESNS-D7-[80-400/0.01]-V[2,2.5,3,3.5,4,4.5]-X[100-500/0.01]-F[50-499/0.01]-A[1-4.49/0.01]-E[1-4.49/0.01]-C[0.1-1/0.1]
ESNS-D7.5-[80-325/0.01]-V[3,3.5,4,4.5]-X[100-425/0.01]-F[50-424/0.01]-A[1.5-4.49/0.01]-E[1.5-4.49/0.01]-C[0.1-1/0.1]
ESNS-D8-[80-400/0.01]-V[2-5/0.5]-X[100-500/0.01]-F[50-499/0.01]-A[2-4.99/0.01]-E[2-4.99/0.01]-C[0.1-1/0.1]
ESNS-D8-[80-400/0.01]-V[3,3.5,4,4.5,5]-X[100-500/0.01]-F[50-499/0.01]-A[2-4.99/0.01]-E[2-4.99/0.01]-C[0.1-1/0.1]
ESNS-D10-[80-400/0.01]-V[4,4.5,5,5.5,6,6.5]-X[100-500/0.01]-F[50-499/0.01]-A[2-6.49/0.01]-E[2-6.49/0.01]-C[0.1-1/0.1]
ESNS-D12-[80-400/0.01]-V[4-8.5/0.5]-X[100-500/0.01]-F[50-499/0.01]-A[2-8.49/0.01]-E[2-8.49/0.01]-C[0.1-1/0.1]

Minimum order quantity	Standard Shipping Days ?	RoHS	Head thickness	D/P (Shaft diameter) (mm)	V (Hole diameter) (mm)	Center pin tip shape	L (L dimension) (mm)	A (Center pin tip diameter) (mm)	C (Recess diameter) (mm)	E (Center pin tip diameter) (mm)	F (Center pin shaft diameter length) (mm)	R (mm)	X (Full length of the center pin) (mm)
1	Quote	10	6mm(JIS)	4	1.5 ～ 2.5	D	80 ～ 200	0.7 ～ 2.49	0.1 ～ 1	0.7 ～ 2.49	50 ～ 299	-	100 ～ 300
1	Quote	10	6mm(JIS)	4.5	1.5 ～ 2.5	D	80 ～ 200	1 ～ 2.49	0.1 ～ 0.7	1 ～ 2.49	50 ～ 299.5	-	100 ～ 300
1	Quote	10	6mm(JIS)	5	2 ～ 3	D	80 ～ 275	1 ～ 2.99	0.1 ～ 1	1 ～ 2.99	50 ～ 374	-	100 ～ 375
1	Quote	10	6mm(JIS)	5.5	2 ～ 3	D	80 ～ 275	1 ～ 2.99	0.1 ～ 1	1 ～ 2.99	50 ～ 374	-	100 ～ 375
1	Quote	10	6mm(JIS)	6	2 ～ 4	D	80 ～ 400	1 ～ 3.99	0.1 ～ 1	1 ～ 3.99	50 ～ 499	-	100 ～ 500
1	Quote	10	6mm(JIS)	6.5	2 ～ 4	D	80 ～ 400	1 ～ 3.99	0.1 ～ 1	1 ～ 3.99	50 ～ 499	-	100 ～ 500
1	Quote	10	6mm(JIS)	7	2 ～ 4.5	D	80 ～ 400	1 ～ 4.49	0.1 ～ 1	1 ～ 4.49	50 ～ 499	-	100 ～ 500
1	Quote	10	6mm(JIS)	7.5	3 ～ 4.5	D	80 ～ 325	1.5 ～ 4.49	0.1 ～ 1	1.5 ～ 4.49	50 ～ 424	-	100 ～ 425
1	Quote	10	8mm(JIS)	8	2 ～ 5	D	80 ～ 400	2 ～ 4.99	0.1 ～ 1	2 ～ 4.99	50 ～ 499	-	100 ～ 500
1	Quote	10	8mm(JIS)	8	3 ～ 5	D	80 ～ 400	2 ～ 4.99	0.1 ～ 1	2 ～ 4.99	50 ～ 499	-	100 ～ 500
1	Quote	10	8mm(JIS)	10	4 ～ 6.5	D	80 ～ 400	2 ～ 6.49	0.1 ～ 1	2 ～ 6.49	50 ～ 499	-	100 ～ 500
1	Quote	10	8mm(JIS)	12	4 ～ 8.5	D	80 ～ 400	2 ～ 8.49	0.1 ～ 1	2 ～ 8.49	50 ～ 499	-	100 ～ 500
1	Quote	10	4mm(T4)	4	1.5 ～ 2.5	D	80 ～ 200	0.7 ～ 2.49	0.1 ～ 1	0.7 ～ 2.49	50 ～ 299	-	100 ～ 300
1	Quote	10	4mm(T4)	4.5	1.5 ～ 2.5	D	80 ～ 200	1 ～ 2.49	0.1 ～ 0.7	1 ～ 2.49	50 ～ 299.5	-	100 ～ 300
1	Quote	10	4mm(T4)	5	2 ～ 3	D	80 ～ 275	1 ～ 2.99	0.1 ～ 1	1 ～ 2.99	50 ～ 374	-	100 ～ 375
1	Quote	10	4mm(T4)	5.5	2 ～ 3	D	80 ～ 275	1 ～ 2.99	0.1 ～ 1	1 ～ 2.99	50 ～ 374	-	100 ～ 375
1	Quote	10	4mm(T4)	6	2 ～ 4	D	80 ～ 400	1 ～ 3.99	0.1 ～ 1	1 ～ 3.99	50 ～ 499	-	100 ～ 500
1	Quote	10	4mm(T4)	6.5	2 ～ 4	D	80 ～ 400	1 ～ 3.99	0.1 ～ 1	1 ～ 3.99	50 ～ 499	-	100 ～ 500
1	Quote	10	4mm(T4)	7	2 ～ 4.5	D	80 ～ 400	1 ～ 4.49	0.1 ～ 1	1 ～ 4.49	50 ～ 499	-	100 ～ 500
1	Quote	10	4mm(T4)	7.5	3 ～ 4.5	D	80 ～ 325	1.5 ～ 4.49	0.1 ～ 1	1.5 ～ 4.49	50 ～ 424	-	100 ～ 425
1	Quote	10	4mm(T4)	8	2 ～ 5	D	80 ～ 400	2 ～ 4.99	0.1 ～ 1	2 ～ 4.99	50 ～ 499	-	100 ～ 500
1	Quote	10	4mm(T4)	8	3 ～ 5	D	80 ～ 400	2 ～ 4.99	0.1 ～ 1	2 ～ 4.99	50 ～ 499	-	100 ～ 500
1	Quote	10	4mm(T4)	10	4 ～ 6.5	D	80 ～ 400	2 ～ 6.49	0.1 ～ 1	2 ～ 6.49	50 ～ 499	-	100 ～ 500
1	Quote	10	4mm(T4)	12	4 ～ 8.5	D	80 ～ 400	2 ～ 8.49	0.1 ～ 1	2 ～ 8.49	50 ～ 499	-	100 ～ 500

Products homepage

Basic information

Product composition	Center pin sets	Material	EN 1.2344 Equiv.	Surface treatment	Nitrided
Shaft diameter tolerance	-0.01/-0.02	Concentricity between the hole and shaft diameters	◎0.06	Inner dia. tolerance	H7
Tapered or not	No	Technical Standard	JIS

Configure

24Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
Clear
D/P (Shaft diameter)(mm)
4

4.5

5

5.5

6

6.5

7

7.5

8

10

12
Clear
V (Hole diameter)(mm)
1.5

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

8

8.5
[2-8.5/0.5mm Unit(s)]
Clear
L (L dimension)(mm)
[80-400/0.01mm Unit(s)]
Clear
A (Center pin tip diameter)(mm)
[0.7-8.49/0.01mm Unit(s)]
Clear
C (Recess diameter)(mm)
[0.1-1/0.1mm Unit(s)]
Clear
E (Center pin tip diameter)(mm)
[0.7-8.49/0.01mm Unit(s)]
Clear
F (Center pin shaft diameter length)(mm)
[50-499/0.01mm Unit(s)]
Clear
R(mm)
Clear
X (Full length of the center pin)(mm)
[100-500/0.01mm Unit(s)]
Clear
Type
- ESJS-A
- ESJS-B
- ESJS-C
- ESJS-D
- ESJS-E
- ESJS-S
- ESNS-A
- ESNS-B
- ESNS-C
- ESNS-D
- ESNS-E
- ESNS-S
Clear
Center pin tip shape
- S
- A
- B
- C
- D
- E
Clear
Filter by CAD data type
- 2D
- 3D
Clear