Sprue bushes / material selectable / end form selectable / flange thickness 10mm / JIS type A

Click on this image to zoom in.

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SJACE10-[0-120/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJACE12-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJACE13-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJACE16-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJACE20-[0-200/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJADE8-[0-80/0.1]-SR[10.5,11]-P[2-3.5/0.5]-A[1-3/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJADE10-[0-120/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJADE12-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJADE13-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJADE16-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJADE20-[0-200/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJAME8-[0-80/0.1]-SR[10.5,11]-P[2-3.5/0.5]-A[1-3/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJAME10-[0-120/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJAME12-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJAME13-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJAME16-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJAME20-[0-200/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SJGCE10-[0-120/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-13/0.1]-G[1-10/1]
SJGCE12-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-13/0.1]-G[1-10/1]
SJGCE13-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-13/0.1]-G[1-10/1]
SJGCE16-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-16/0.1]-G[1-10/1]
SJGCE20-[0-200/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-20/0.1]-G[1-10/1]
SJGDE10-[0-120/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-13/0.1]-G[1-10/1]
SJGDE12-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-13/0.1]-G[1-10/1]
SJGDE13-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-13/0.1]-G[1-10/1]
SJGDE16-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-16/0.1]-G[1-10/1]
SJGDE20-[0-200/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-20/0.1]-G[1-10/1]
SJGME10-[0-120/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-13/0.1]-G[1-10/1]
SJGME12-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-13/0.1]-G[1-10/1]
SJGME13-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-13/0.1]-G[1-10/1]
SJGME16-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-16/0.1]-G[1-10/1]
SJGME20-[0-200/0.1]-SR[10.5,11]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]-V[4-20/0.1]-G[1-10/1]

Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Tip matching shape	Nozzle touch part specification	D (Shaft diameter) (mm)	L (Bearing bore length) (mm)	A (Taper angle at sprue) (°)	F (Resin pocket depth) (mm)	G (Taper angle) (mm)	P (Sprue diameter) (mm)	SR (Nozzle part) (mm)	V (Tip diameter) (mm)
1	Quote	10	S45C	Straight	Resin pocket	10	0 ～ 120	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	S45C	Straight	Resin pocket	12	0 ～ 150	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	S45C	Straight	Resin pocket	13	0 ～ 150	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	S45C	Straight	Resin pocket	16	0 ～ 150	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	S45C	Straight	Resin pocket	20	0 ～ 200	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	SKD61	Straight	Resin pocket	8	0 ～ 80	1 ～ 3	0.3 ～ 2	-	2 ～ 3.5	10.5 ～ 11	-
1	Quote	10	SKD61	Straight	Resin pocket	10	0 ～ 120	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	SKD61	Straight	Resin pocket	12	0 ～ 150	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	SKD61	Straight	Resin pocket	13	0 ～ 150	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	SKD61	Straight	Resin pocket	16	0 ～ 150	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	SKD61	Straight	Resin pocket	20	0 ～ 200	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	HPM1 Equivalent	Straight	Resin pocket	8	0 ～ 80	1 ～ 3	0.3 ～ 2	-	2 ～ 3.5	10.5 ～ 11	-
1	Quote	10	HPM1 Equivalent	Straight	Resin pocket	10	0 ～ 120	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	HPM1 Equivalent	Straight	Resin pocket	12	0 ～ 150	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	HPM1 Equivalent	Straight	Resin pocket	13	0 ～ 150	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	HPM1 Equivalent	Straight	Resin pocket	16	0 ～ 150	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	HPM1 Equivalent	Straight	Resin pocket	20	0 ～ 200	1 ～ 4	0.3 ～ 2	-	2 ～ 5	10.5 ～ 11	-
1	Quote	10	S45C	Tapered	Resin pocket	10	0 ～ 120	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 13
1	Quote	10	S45C	Tapered	Resin pocket	12	0 ～ 150	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 13
1	Quote	10	S45C	Tapered	Resin pocket	13	0 ～ 150	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 13
1	Quote	10	S45C	Tapered	Resin pocket	16	0 ～ 150	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 16
1	Quote	10	S45C	Tapered	Resin pocket	20	0 ～ 200	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 20
1	Quote	10	SKD61	Tapered	Resin pocket	10	0 ～ 120	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 13
1	Quote	10	SKD61	Tapered	Resin pocket	12	0 ～ 150	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 13
1	Quote	10	SKD61	Tapered	Resin pocket	13	0 ～ 150	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 13
1	Quote	10	SKD61	Tapered	Resin pocket	16	0 ～ 150	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 16
1	Quote	10	SKD61	Tapered	Resin pocket	20	0 ～ 200	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 20
1	Quote	10	HPM1 Equivalent	Tapered	Resin pocket	10	0 ～ 120	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 13
1	Quote	10	HPM1 Equivalent	Tapered	Resin pocket	12	0 ～ 150	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 13
1	Quote	10	HPM1 Equivalent	Tapered	Resin pocket	13	0 ～ 150	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 13
1	Quote	10	HPM1 Equivalent	Tapered	Resin pocket	16	0 ～ 150	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 16
1	Quote	10	HPM1 Equivalent	Tapered	Resin pocket	20	0 ～ 200	1 ～ 4	0.3 ～ 2	1 ～ 10	2 ～ 5	10.5 ～ 11	4 ～ 20

Products homepage

Basic information

Product type	Bolt fixing	Bolt specifications	Normal bolt	Head thickness(mm)	10

Configure

32Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- S45C
- HPM1 Equivalent
- SKD61
Clear
Tip matching shape
- Straight
- Tapered
Clear
D (Shaft diameter)(mm)
8

10

12

13

16

20
Clear
L (Bearing bore length)(mm)
[0-200/0.1mm Unit(s)]
Clear
A (Taper angle at sprue)(°)
[1-4/0.5° Unit(s)]
Clear
F (Resin pocket depth)(mm)
0.3

0.5

0.8

1

1.2

1.5

1.8

2
Clear
G (Taper angle)(mm)
[1-10/1mm Unit(s)]
Clear
P (Sprue diameter)(mm)
2

2.5

3

3.5

4

4.5

5
[2-3.5/0.5mm Unit(s)]
Clear
SR (Nozzle part)(mm)
0

10.5

11

12

13

16
Clear
V (Tip diameter)(mm)
[4-20/0.1mm Unit(s)]
Clear
Type
- SJAC
- SJACE
- SJACH
- SJAD
- SJADE
- SJADH
- SJAM
- SJAME
- SJAMH
- SJGC
- SJGCE
- SJGCH
- SJGD
- SJGDE
- SJGDH
- SJGM
- SJGME
- SJGMH
Clear
Nozzle touch part specification
- Normal
- String eliminator
- Resin pocket
Clear
Filter by CAD data type
- 2D
- 3D
Clear