Sprue bushes / head offset / material selectable / end form selectable / JIS type B (Part Numbers - CAD Download)

Click on this image to zoom in.

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SJBC10-25-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBC10-30-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBC12-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBC12-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBC13-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBC13-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBC16-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBC16-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBC20-25-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBC20-30-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBCH10-25-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBCH10-30-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBCH12-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBCH12-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBCH13-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBCH13-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBCH16-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBCH16-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBCH20-25-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBCH20-30-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBD10-25-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBD10-30-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBD12-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBD12-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBD13-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBD13-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBD16-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBD16-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBD20-25-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBD20-30-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBDH10-25-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBDH10-30-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBDH12-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBDH12-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBDH13-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBDH13-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBDH16-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBDH16-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBDH20-25-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBDH20-30-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBM10-25-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBM10-30-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBM12-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBM12-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBM13-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBM13-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBM16-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBM16-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBM20-25-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBM20-30-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2,2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBMH10-25-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBMH10-30-[0-120/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBMH12-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBMH12-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBMH13-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBMH13-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBMH16-25-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBMH16-30-[0-150/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBMH20-25-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]
SJBMH20-30-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21]-P[2.5,3,3.5,4,4.5,5]-A[1-4/0.5]

Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Tip matching shape	Nozzle touch part specification	Head thickness (mm)	D (Shaft diameter) (mm)	L (Bearing bore length) (mm)	A (Taper angle at sprue) (°)	G (Taper angle) (mm)	P (Sprue diameter) (mm)	SR (Nozzle part) (mm)	V (Tip diameter) (mm)
1	Quote	10	S45C	Straight	Normal	25	10	0 ～ 120	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	Normal	30	10	0 ～ 120	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	Normal	25	12	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	Normal	30	12	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	Normal	25	13	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	Normal	30	13	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	Normal	25	16	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	Normal	30	16	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	Normal	25	20	0 ～ 200	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	Normal	30	20	0 ～ 200	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	String eliminator	25	10	0 ～ 120	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	String eliminator	30	10	0 ～ 120	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	String eliminator	25	12	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	String eliminator	30	12	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	String eliminator	25	13	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	String eliminator	30	13	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	String eliminator	25	16	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	String eliminator	30	16	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	String eliminator	25	20	0 ～ 200	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	S45C	Straight	String eliminator	30	20	0 ～ 200	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	Normal	25	10	0 ～ 120	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	Normal	30	10	0 ～ 120	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	Normal	25	12	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	Normal	30	12	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	Normal	25	13	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	Normal	30	13	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	Normal	25	16	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	Normal	30	16	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	Normal	25	20	0 ～ 200	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	Normal	30	20	0 ～ 200	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	String eliminator	25	10	0 ～ 120	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	String eliminator	30	10	0 ～ 120	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	String eliminator	25	12	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	String eliminator	30	12	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	String eliminator	25	13	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	String eliminator	30	13	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	String eliminator	25	16	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	String eliminator	30	16	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	String eliminator	25	20	0 ～ 200	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	SKD61	Straight	String eliminator	30	20	0 ～ 200	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	25	10	0 ～ 120	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	30	10	0 ～ 120	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	25	12	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	30	12	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	25	13	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	30	13	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	25	16	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	30	16	0 ～ 150	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	25	20	0 ～ 200	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	30	20	0 ～ 200	1 ～ 4	-	2 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	25	10	0 ～ 120	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	30	10	0 ～ 120	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	25	12	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	30	12	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	25	13	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	30	13	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	25	16	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	30	16	0 ～ 150	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	25	20	0 ～ 200	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	30	20	0 ～ 200	1 ～ 4	-	2.5 ～ 5	0 ～ 21	-

Products homepage

Basic information

Product type	Shoulder type

Configure

60Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- S45C
- HPM1 Equivalent
- SKD61
Clear
Nozzle touch part specification
- Normal
- String eliminator
Clear
Head thickness(mm)
25

30
Clear
D (Shaft diameter)(mm)
10

12

13

16

20
Clear
L (Bearing bore length)(mm)
[0-200/0.1mm Unit(s)]
Clear
A (Taper angle at sprue)(°)
[1-4/0.5° Unit(s)]
Clear
G (Taper angle)(mm)
Clear
P (Sprue diameter)(mm)
2

2.5

3

3.5

4

4.5

5
Clear
SR (Nozzle part)(mm)
0

10.5

11

12

13

16

20

21
Clear
V (Tip diameter)(mm)
Clear
Type
- SJBC
- SJBCH
- SJBD
- SJBDH
- SJBM
- SJBMH
- SJTC
- SJTCH
- SJTD
- SJTDH
- SJTM
- SJTMH
Clear
Tip matching shape
- Straight
- Tapered
Clear
Filter by CAD data type
- 2D
- 3D
Clear