Ejector pins / head flattened on one side / EN 1.2344 Equiv. / engraved face / nitrided / length configurable

Basic Attributes

• Shaft diameter tolerance (Reference tolerance)

  • -0.01/-0.02
  • -0.01/-0.03
  • -0.01/-0.04

  Clear

• L dimension tolerance (Reference tolerance)

  • +0.02/0
  • +0.02/0 or +0.05/0

  Clear

• Head thickness

  • 4mm(T4)
  • 6mm(JIS)
  • 8mm(JIS)

  Clear

• D/P (Shaft diameter)(mm)

  • 1
  • 1.1
  • 1.2
  • 1.3
  • 1.4
  • 1.5
  • 1.6
  • 1.7
  • 1.8
  • 1.9
  • 2
  • 2.1
  • 2.2
  • 2.3
  • 2.4
  • 2.5
  • 2.6
  • 2.7
  • 2.8
  • 2.9
  • 3
  • 3.1
  • 3.2
  • 3.3
  • 3.4
  • 3.5
  • 3.6
  • 3.7
  • 3.8
  • 3.9
  • 4
  • 4.1
  • 4.2
  • 4.3
  • 4.4
  • 4.5
  • 4.6
  • 4.7
  • 4.8
  • 4.9
  • 5
  • 5.1
  • 5.2
  • 5.3
  • 5.4
  • 5.5
  • 5.6
  • 5.7
  • 5.8
  • 5.9
  • 6
  • 6.1
  • 6.2
  • 6.3
  • 6.4
  • 6.5
  • 7
  • 8
  • 10
  • 12
  • 13
  • 15
  • 16
  • 20
  • 25

  Clear

• Number of engraving characters

  • 1 characters
  • 2 characters
  • 3 characters
  • 4 characters
  • 5 characters

  Clear

• L (L dimension)(mm)

   [40-300/0.01mm Unit(s)]

  Clear

• Engraving character designation

  • ※Designation by WOS

  Clear

• Type

  • EPJ1M
  • EPJ1MR
  • EPJ2M
  • EPJ2MR
  • EPJ3M
  • EPJ4M
  • EPJ5M
  • EPN1M
  • EPN1MR
  • EPN2M
  • EPN2MR
  • EPN3M
  • EPN4M
  • EPN5M

  Clear

• Character engraving type

  • Concave character
  • Concave character (Sequential numbering)

  Clear

• Filter by CAD data type

  • 2D
  • 3D

  Clear