• Marcas
  • Empresa
  • Contacto
PT
Type Code Seach | *NOT READY*
#CODE
Sugestões de palavras-chave
Sugestões de número de peça
Discontinued Products

Ejector sleeves / steel / low wall thickness / length configurable / concentricity 0.005

Ejector sleeves / steel / low wall thickness / length configurable / concentricity 0.005

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
ESV3.5-[0.01,​150.01,​250]-V[0.8-2.3/0.01]-S[1-8/0.5]
ESV3.5-[40-250/0.01]-V[0.8-2.3/0.01]-S[1-8/0.5]
ESV4-[40-250/0.01]-V[0.8-2.8/0.01]-S[1-8/0.5]
ESV5-[40-250/0.01]-V[0.8-3.8/0.01]-S[1-11/0.5]
ESV6-[40-250/0.01]-V[0.8-4.8/0.01]-S[1-14/0.5]
ESV7-[40-250/0.01]-V[0.8-5.8/0.01]-S[1-17/0.5]
ESV8-[40-250/0.01]-V[2-6.2/0.01]-S[1-18.5/0.5]
ESV9-[40-250/0.01]-V[2-7.2/0.01]-S[1-21.5/0.5]
ESV10-[40-250/0.01]-V[2-8.2/0.01]-S[1-24.5/0.5]
ESV11-[40-250/0.01]-V[2-9.2/0.01]-S[1-27.5/0.5]
ESV12-[40-250/0.01]-V[2-10.2/0.01]-S[1-30.5/0.5]
ESV13-[40-250/0.01]-V[2-11.2/0.01]-S[1-33.5/0.5]
ESV14-[40-250/0.01]-V[2-12.2/0.01]-S[1-36.5/0.5]
ESVB4-[40-250/0.01]-P[3.2-3.99/0.01]-V[0.8-2.79/0.01]-S[1-8/0.5]
ESVB5-[40-250/0.01]-P[4-4.99/0.01]-V[0.8-3.79/0.01]-S[1-15/0.5]
ESVB6-[40-250/0.01]-P[5-5.99/0.01]-V[0.8-4.79/0.01]-S[1-25/0.5]
ESVB7-[40-250/0.01]-P[6-6.99/0.01]-V[0.8-5.79/0.01]-S[1-25/0.5]
ESVB8-[40-250/0.01]-P[7-7.99/0.01]-V[2-6.19/0.01]-S[1-25/0.5]
ESVB9-[40-250/0.01]-P[8-8.99/0.01]-V[2-7.19/0.01]-S[1-25/0.5]
ESVB10-[40-250/0.01]-P[9-9.99/0.01]-V[2-8.19/0.01]-S[1-24.5/0.5]
ESVB11-[40-250/0.01]-P[10-10.99/0.01]-V[2-9.19/0.01]-S[1-25/0.5]
ESVB12-[40-250/0.01]-P[11-11.99/0.01]-V[2-10.19/0.01]-S[1-25/0.5]
ESVB13-[40-250/0.01]-P[12-12.99/0.01]-V[2-11.19/0.01]-S[1-25/0.5]
ESVB14-[40-250/0.01]-P[13-13.99/0.01]-V[2-12.19/0.01]-S[1-25/0.5]
ESVJ6-[40-250/0.01]-V[0.8-4.8/0.01]-S[1-14/0.5]
ESVJ7-[40-250/0.01]-V[0.8-5.8/0.01]-S[1-17/0.5]
ESVJ8-[40-250/0.01]-V[2-6.2/0.01]-S[1-18.5/0.5]
ESVJ9-[40-250/0.01]-V[2-7.2/0.01]-S[1-21.5/0.5]
ESVJ10-[40-250/0.01]-V[2-8.2/0.01]-S[1-24.5/0.5]
ESVJ11-[40-250/0.01]-V[2-9.2/0.01]-S[1-25/0.5]
ESVJ12-[40-250/0.01]-V[2-10.2/0.01]-S[1-25/0.5]
ESVJ13-[40-250/0.01]-V[2-11.2/0.01]-S[1-25/0.5]
ESVJ14-[40-250/0.01]-V[2-12.2/0.01]-S[1-25/0.5]
ESVJB6-[40-225/0.01]-P[5-5.99/0.01]-V[0.8-4.79/0.01]-S[1-14/0.5]
ESVJB7-[40-225/0.01]-P[6-6.99/0.01]-V[0.8-5.79/0.01]-S[1-20.5/0.5]
ESVJB8-[40-250/0.01]-P[7-7.99/0.01]-V[2-6.19/0.01]-S[1-23.5/0.5]
ESVJB9-[40-250/0.01]-P[8-8.99/0.01]-V[2-7.19/0.01]-S[1-25/0.5]
ESVJB10-[40-250/0.01]-P[9-9.99/0.01]-V[2-8.19/0.01]-S[1-25/0.5]
ESVJB11-[40-250/0.01]-P[10-10.99/0.01]-V[2-9.19/0.01]-S[1-25/0.5]
ESVJB12-[40-250/0.01]-P[11-11.99/0.01]-V[2-10.19/0.01]-S[1-25/0.5]
ESVJB13-[40-250/0.01]-P[12-12.99/0.01]-V[2-11.19/0.01]-S[1-25/0.5]
ESVJB14-[40-250/0.01]-P[13-13.99/0.01]-V[2-12.19/0.01]-S[1-25/0.5]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm) 		V (Hole diameter)
(mm) 		Concentricity between the hole and shaft diameters Boring method Inner dia. tolerance Shaft diameter designation method L (L dimension)
(mm) 		S (V hole diameter length)
(mm)
1 Quote 104mm(T4)0/-0.0053.50.8 ～ 2.3◎0.005Grinding+0.005/0Shaft diameter selection-1 ～ 8
1 Quote 104mm(T4)0/-0.0053.50.8 ～ 2.3◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 8
1 Quote 104mm(T4)0/-0.00540.8 ～ 2.8◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 8
1 Quote 104mm(T4)0/-0.00550.8 ～ 3.8◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 11
1 Quote 104mm(T4)0/-0.00560.8 ～ 4.8◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 14
1 Quote 104mm(T4)0/-0.00570.8 ～ 5.8◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 17
1 Quote 104mm(T4)0/-0.00582 ～ 6.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 18.5
1 Quote 104mm(T4)0/-0.00592 ～ 7.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 21.5
1 Quote 104mm(T4)0/-0.005102 ～ 8.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 24.5
1 Quote 104mm(T4)0/-0.005112 ～ 9.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 27.5
1 Quote 104mm(T4)0/-0.005122 ～ 10.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 30.5
1 Quote 104mm(T4)0/-0.005132 ～ 11.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 33.5
1 Quote 104mm(T4)0/-0.005142 ～ 12.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 36.5
1 Quote 104mm(T4)0/-0.0053.2 ～ 3.990.8 ～ 2.79◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 8
1 Quote 104mm(T4)0/-0.0054 ～ 4.990.8 ～ 3.79◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 15
1 Quote 104mm(T4)0/-0.0055 ～ 5.990.8 ～ 4.79◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 104mm(T4)0/-0.0056 ～ 6.990.8 ～ 5.79◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 104mm(T4)0/-0.0057 ～ 7.992 ～ 6.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 104mm(T4)0/-0.0058 ～ 8.992 ～ 7.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 104mm(T4)0/-0.0059 ～ 9.992 ～ 8.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 24.5
1 Quote 104mm(T4)0/-0.00510 ～ 10.992 ～ 9.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 104mm(T4)0/-0.00511 ～ 11.992 ～ 10.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 104mm(T4)0/-0.00512 ～ 12.992 ～ 11.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 104mm(T4)0/-0.00513 ～ 13.992 ～ 12.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 106mm(JIS)0/-0.00560.8 ～ 4.8◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 14
1 Quote 106mm(JIS)0/-0.00570.8 ～ 5.8◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 17
1 Quote 108mm(JIS)0/-0.00582 ～ 6.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 18.5
1 Quote 108mm(JIS)0/-0.00592 ～ 7.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 21.5
1 Quote 108mm(JIS)0/-0.005102 ～ 8.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 24.5
1 Quote 108mm(JIS)0/-0.005112 ～ 9.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 25
1 Quote 108mm(JIS)0/-0.005122 ～ 10.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 25
1 Quote 108mm(JIS)0/-0.005132 ～ 11.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 25
1 Quote 108mm(JIS)0/-0.005142 ～ 12.2◎0.005Grinding+0.005/0Shaft diameter selection40 ～ 2501 ～ 25
1 Quote 106mm(JIS)0/-0.0055 ～ 5.990.8 ～ 4.79◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2251 ～ 14
1 Quote 106mm(JIS)0/-0.0056 ～ 6.990.8 ～ 5.79◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2251 ～ 20.5
1 Quote 108mm(JIS)0/-0.0057 ～ 7.992 ～ 6.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 23.5
1 Quote 108mm(JIS)0/-0.0058 ～ 8.992 ～ 7.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 108mm(JIS)0/-0.0059 ～ 9.992 ～ 8.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 108mm(JIS)0/-0.00510 ～ 10.992 ～ 9.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 108mm(JIS)0/-0.00511 ～ 11.992 ～ 10.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 108mm(JIS)0/-0.00512 ～ 12.992 ～ 11.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25
1 Quote 108mm(JIS)0/-0.00513 ～ 13.992 ～ 12.19◎0.005Grinding+0.005/0Shaft diameter 0.01mm increments40 ～ 2501 ～ 25

Loading...

  1. 1
 

Basic information

Product composition Single sleeve Material EN 1.3343 Equiv. Surface treatment No
Tapered or not No Center pin tip shape No Technical Standard JIS

Configure

Clear all

42Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Clear

  • Shaft diameter tolerance

    • 0/-0.005
    • -0.01/-0.02

    Clear

  • D/P (Shaft diameter)(mm)

    • 3.5
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14

     [3.2-13.99/0.01mm Unit(s)]

    Clear

  • V (Hole diameter)(mm)

     [0.8-12.2/0.01mm Unit(s)]

    Clear

  • Concentricity between the hole and shaft diameters

    • ◎0.005
    • ◎0.01

    Clear

  • Boring method

    • Grinding

    Clear

  • Shaft diameter designation method

    • Shaft diameter 0.01mm increments
    • Shaft diameter selection

    Clear

  • L (L dimension)(mm)

     [40-250/0.01mm Unit(s)]

    Clear

  • S (V hole diameter length)(mm)

     [1-36.5/0.5mm Unit(s)]

    Clear

  • Type

    • ESV
    • ESV-H
    • ESV-M
    • ESVB
    • ESVB-H
    • ESVB-M
    • ESVJ
    • ESVJB

    Clear

  • Inner dia. tolerance

    • +0.005/0
    • +0.01/0

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Optional Attributes

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Método de pagamento

Pagamento por conta

Pré-pagamento

PayPal

Fabrico a pedido

Alterar Vista

Certificados

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

A MISUMI pelo mundo

Redes sociais

Aviso legal

Copyright © MISUMI Corporation Todos os direitos reservados.