STRAIGHT EJECTOR SLEEVES / DIN ISO 8405 / EN 1.2344 Equiv. / Hardened / ◎0.08 / L, P, V Dimensions Configurable

MISUMI

DIN Standard
New Product

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Specifications

Drawing / Product specification

D-ESDB

Range of guaranteed shaft diameter precision (b1=L－x1)
x1 max.40
[ ! ]Nitriding may extend to the head as it is applied after dimension V and P machining.
[ ! ]When the diameter (P) portion of the stepped center pin is inserted into the relief hole (C), make sure	relief hole (C) ≧ pin diameter (P)＋1.0

Type	[ M ]	[ H ]	[ T ] V	Applicable center pin shaft diameter tolerance
D-ESDB	1.2344 equivalent	Base Material: 50～55HRC	H7	-0.01 -0.02	*Note that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance 0-0.005 is not recommended. The reason for this is the fitting section S are longer.

[ T ]P_g6

P≦6	6.5≦P≦10	12≦P≦16	P＝20
－0.004 －0.012	－0.005 －0.014	－0.006 －0.017	－0.007 －0.020

[ T ]V_H7

V≦3.0	3.1≦V≦6.0	6.1≦V≦10.0	V≧10.1
+0.010 0	+0.012 0	+0.015 0	+0.018 0

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
D-ESDB4-[40-200/0.01]-P[3.5-3.99/0.01]-V[1.5-1.9/0.1]-C[2-2.4/0.1]-S[20-40/1]
D-ESDB4.5-[40-200/0.01]-P[4.01-4.49/0.01]-V[1.5-2.4/0.1]-C[2-2.9/0.1]-S[20-40/1]
D-ESDB5-[40-300/0.01]-P[4.51-4.99/0.01]-V[2-2.9/0.1]-C[2.5-3.4/0.1]-S[20-100/1]
D-ESDB5.5-[40-300/0.01]-P[5.01-5.49/0.01]-V[2-3.4/0.1]-C[2.5-3.9/0.1]-S[20-100/1]
D-ESDB6-[40-400/0.01]-P[5.51-5.99/0.01]-V[2-3.9/0.1]-C[2.5-4.4/0.1]-S[20-100/1]
D-ESDB6.5-[40-400/0.01]-P[6.01-6.49/0.01]-V[2-4.4/0.1]-C[2.5-4.9/0.1]-S[20-100/1]
D-ESDB7-[40-400/0.01]-P[6.51-6.99/0.01]-V[2-4.9/0.1]-C[2.5-5.4/0.1]-S[20-100/1]
D-ESDB7.5-[40-400/0.01]-P[7.01-7.49/0.01]-V[2-5.4/0.1]-C[2.5-5.9/0.1]-S[20-100/1]
D-ESDB8-[70-500/0.01]-P[7.51-7.99/0.01]-V[2.5-5.9/0.1]-C[3-6.4/0.1]-S[20-100/1]
D-ESDB9-[70-500/0.01]-P[8.01-8.99/0.01]-V[2.5-6.9/0.1]-C[3-7.4/0.1]-S[20-100/1]
D-ESDB10-[70-500/0.01]-P[9.01-9.99/0.01]-V[2.5-7.9/0.1]-C[3-8.4/0.1]-S[20-100/1]
D-ESDB12-[70-500/0.01]-P[10.01-11.99/0.01]-V[2.5-9.9/0.1]-C[3-10.4/0.1]-S[20-100/1]
D-ESDB12-[500.1-800/0.1]-P[10.01-11.99/0.01]-V[2.5-9.9/0.1]-C[3-10.4/0.1]-S[20-100/1]
D-ESDB15-[70-500/0.01]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-13.4/0.1]-S[20-100/1]
D-ESDB15-[500.1-800/0.1]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-13.4/0.1]-S[20-100/1]
D-ESDB16-[70-500/0.01]-P[15.01-15.99/0.01]-V[2.5-13/0.1]-C[3-14.4/0.1]-S[20-100/1]
D-ESDB16-[500.1-800/0.1]-P[15.01-15.99/0.01]-V[2.5-13/0.1]-C[3-14.4/0.1]-S[20-100/1]
D-ESDB20-[100-500/0.01]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-18.4/0.1]-S[20-100/1]
D-ESDB20-[500.1-800/0.1]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-18.4/0.1]-S[20-100/1]

Minimum order quantity	Standard Shipping Days ?	Head thickness	Shaft diameter tolerance	D/P (Shaft diameter) (mm)	V (Hole diameter) (mm)	L (L dimension) (mm)	C (Recess Diameter) (㎜)	S (V Hole Diameter Length) (mm)	P (Shaft Diameter)
1	17 Days	3mm	-0.04/-0.012	4	1.5 ～ 1.9	40 ～ 200	2 ～ 2.4	20 ～ 40	3.5 ～ 3.99
1	17 Days	3mm	-0.04/-0.012	4.5	1.5 ～ 2.4	40 ～ 200	2 ～ 2.9	20 ～ 40	4.01 ～ 4.49
1	17 Days	3mm	-0.04/-0.012	5	2 ～ 2.9	40 ～ 300	2.5 ～ 3.4	20 ～ 100	4.51 ～ 4.99
1	17 Days	3mm	-0.04/-0.012	5.5	2 ～ 3.4	40 ～ 300	2.5 ～ 3.9	20 ～ 100	5.01 ～ 5.49
1	17 Days	5mm	-0.04/-0.012	6	2 ～ 3.9	40 ～ 400	2.5 ～ 4.4	20 ～ 100	5.51 ～ 5.99
1	17 Days	5mm	-0.005/-0.014	6.5	2 ～ 4.4	40 ～ 400	2.5 ～ 4.9	20 ～ 100	6.01 ～ 6.49
1	17 Days	5mm	-0.005/-0.014	7	2 ～ 4.9	40 ～ 400	2.5 ～ 5.4	20 ～ 100	6.51 ～ 6.99
1	17 Days	5mm	-0.005/-0.014	7.5	2 ～ 5.4	40 ～ 400	2.5 ～ 5.9	20 ～ 100	7.01 ～ 7.49
1	17 Days	5mm	-0.005/-0.014	8	2.5 ～ 5.9	70 ～ 500	3 ～ 6.4	20 ～ 100	7.51 ～ 7.99
1	17 Days	5mm	-0.005/-0.014	9	2.5 ～ 6.9	70 ～ 500	3 ～ 7.4	20 ～ 100	8.01 ～ 8.99
1	17 Days	5mm	-0.005/-0.014	10	2.5 ～ 7.9	70 ～ 500	3 ～ 8.4	20 ～ 100	9.01 ～ 9.99
1	18 Days	7mm	-0.006/-0.017	12	2.5 ～ 9.9	70 ～ 500	3 ～ 10.4	20 ～ 100	10.01 ～ 11.99
1	18 Days	7mm	-0.006/-0.017	12	2.5 ～ 9.9	500.1 ～ 800	3 ～ 10.4	20 ～ 100	10.01 ～ 11.99
1	18 Days	7mm	-0.006/-0.017	15	2.5 ～ 12	70 ～ 500	3 ～ 13.4	20 ～ 100	12.01 ～ 14.99
1	18 Days	7mm	-0.006/-0.017	15	2.5 ～ 12	500.1 ～ 800	3 ～ 13.4	20 ～ 100	12.01 ～ 14.99
1	18 Days	7mm	-0.006/-0.017	16	2.5 ～ 13	70 ～ 500	3 ～ 14.4	20 ～ 100	15.01 ～ 15.99
1	18 Days	7mm	-0.006/-0.017	16	2.5 ～ 13	500.1 ～ 800	3 ～ 14.4	20 ～ 100	15.01 ～ 15.99
1	18 Days	8mm	-0.007/-0.020	20	3 ～ 16	100 ～ 500	3.5 ～ 18.4	20 ～ 100	16.01 ～ 19.99
1	18 Days	8mm	-0.007/-0.020	20	3 ～ 16	500.1 ～ 800	3.5 ～ 18.4	20 ～ 100	16.01 ～ 19.99

Specification table

H	T	Part No.		L		P 0.1mm increments	V 0.1mm increments	C 0.1mm increments	Cmax.	S 1mm increments
H	T	Type	No.	0.01mm increments	0.1mm increments	P 0.1mm increments	V 0.1mm increments	C 0.1mm increments	Cmax.	S 1mm increments
8	3	D-ESDB (1.2344 equivalent Hardened)	4	40.00～200.00	-	3.50～ 3.99	1.5～ 1.9	C≧V＋0.5 and C≦P－1.5 ([ ! ]When L>300 0.5mm increments)	2.4	20～100 ([ ! ]No.4, No.4.5 When V1.5～V1.9 20～40)
8			4.5	40.00～200.00		4.01～ 4.49	1.5～ 2.4		2.9
10			5	40.00～300.00		4.51～ 4.99	2.0～ 2.9		3.4
10			5.5	40.00～300.00		5.01～ 5.49	2.0～ 3.4		3.9
12	5		6	40.00～400.00		5.51～ 5.99	2.0～ 3.9		4.4
			6.5			6.01～ 6.49	2.0～ 4.4		4.9
			7			6.51～ 6.99	2.0～ 4.9		5.4
			7.5			7.01～ 7.49	2.0～ 5.4		5.9
14			8	70.00～500.00		7.51～ 7.99	2.5～ 5.9		6.4		20～100
14			9			8.01～ 8.99	2.5～ 6.9		7.4		L	(L－S) min.
16			10			9.01～ 9.99	2.5～ 7.9		8.4		40.00～60.00	20
18	7		12		500.1 ～ 800.0	10.01～11.99	2.5～ 9.9		10.4		60.01～70.00	30
22			15			12.01～14.99	2.5～12.0		12.5		70.01～80.00	40
22			16			15.01～15.99	2.5～13.0		13.5		80.01～	50
26	8		20	100.00～500.00		16.01～19.99	3.0～16.0		16.5
[ ! ]V≦P－2.0

Order Example


Part No.	-	L	-	P	-	V	-	C	-	S
D-ESDB 4	-	200	-	P3.5		V1.5	-	C2.0	-	S30

Alteration


Part No.	-	L	-	P	-	V	-	C	-	S	-	(KC・WKC…etc.)
D-ESDB 10	-	300	-	P9.1	-	V5.5	-	C6.2	-	S50	-	HC10

Basic information

Brand	MISUMI	Product composition	Single sleeve	Material	EN 1.2344 Equiv.
Surface treatment	No	Concentricity between the hole and shaft diameters	◎0.08	Inner dia. tolerance	H7
Tapered or not	No	Center pin tip shape	No	Technical Standard	DIN
Alterations	With

Configure

19Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- D-ESDB
Clear
Head thickness
- 3mm
- 5mm
- 7mm
- 8mm
Clear
Shaft diameter tolerance
- -0.04/-0.012
- -0.005/-0.014
- -0.006/-0.017
- -0.007/-0.020
Clear
D/P (Shaft diameter)(mm)
4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

12

15

16

20
Clear
V (Hole diameter)(mm)
[1.5-16/0.1mm Unit(s)]
Clear
L (L dimension)(mm)
[500.1-800/0.1mm Unit(s)][40-500/0.01mm Unit(s)]
Clear
C (Recess Diameter)(㎜)
[2-18.4/0.1㎜ Unit(s)]
Clear
S (V Hole Diameter Length)(mm)
[20-100/1mm Unit(s)]
Clear
P (Shaft Diameter)
[3.5-3.99/0.01][4.01-4.49/0.01][4.51-4.99/0.01][5.01-5.49/0.01][5.51-5.99/0.01][6.01-6.49/0.01][6.51-6.99/0.01][7.01-7.49/0.01][7.51-7.99/0.01][8.01-8.99/0.01][9.01-9.99/0.01][10.01-11.99/0.01][12.01-14.99/0.01][15.01-15.99/0.01][16.01-19.99/0.01]
Clear
Filter by CAD data type
- 2D
- 3D
Clear