Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
D | h9 (Cold-drawn) | h7 (Ground) | g6 (Ground) |
2·2.5·3 | 0 − 0.025 | 0 − 0.010 | − 0.002 |
− 0.008 | |||
4 to 6 | 0 − 0.030 | 0 − 0.012 | − 0.004 |
− 0.012 | |||
8·10 | 0 − 0.036 | 0 − 0.015 | − 0.005 |
− 0.014 | |||
12 to 18 | 0 − 0.043 | 0 − 0.018 | − 0.006 |
− 0.017 | |||
20 to 30 | 0 − 0.052 | 0 − 0.021 | − 0.007 |
− 0.020 | |||
35 to 50 | 0 − 0.062 | 0 − 0.025 | − 0.009 |
− 0.025 |
D | Circularity M | |
over | or Less | |
1 | 2.5 | 0.006 |
3 | 13 | 0.004 |
13 | 20 | 0.005 |
20 | 40 | 0.006 |
40 | 50 | 0.007 |
D | Straightness K |
2·2.5 | 0.1 |
3·4 | 0.03 |
5 | 0.02 |
6 or more | 0.01 |
Dimension | Dimension Tolerance | |
over | or Less | |
2 | 6 | ±0.1 |
6 | 30 | ±0.2 |
30 | 120 | ±0.3 |
120 | 400 | ±0.5 |
400 | 1000 | ±0.8 |
Type | D Tolerance | [M] Material | [S] Surface Treatment | |||
Standard | Retaining Ring Groove Outside Datum | |||||
Without Retaining Ring | With Retaining Ring | With Retaining Ring | ||||
(1) | NSFMRR | NSFMRRA | — | h9 (Cold-drawn) | EN 1.1191 Equiv. | — |
SFMRR | SFMRRA | — | Black Oxide | |||
PSFMRR | PSFMRRA | — | Electroless Nickel Plating | |||
SSFMRR | SSFMRRA | — | EN 1.4301 Equiv. | — | ||
(2) | NSFHRR | NSFHRRA | — | h7 (Ground) | EN 1.1191 Equiv. | — |
SFHRR | SFHRRA | — | Black Oxide | |||
PSFHRR | PSFHRRA | — | Electroless Nickel Plating | |||
SSFHRR | SSFHRRA | — | EN 1.4301 Equiv. | — | ||
(3) | NSFRR | NSFRRA | NSFRRGA | g6 (Ground) | EN 1.1191 Equiv. | — |
SFRR | SFRRA | SFRRGA | Black Oxide | |||
PSFRR | PSFRRA | PSFRRGA | Electroless Nickel Plating | |||
SSFRR | SSFRRA | SSFRRGA | EN 1.4301 Equiv. | — | ||
— | HFRRA | — | EN 1.7220 Equiv. [H]Hardness: 30 to 35HRC | Black Oxide | ||
— | PHFRRA | — | Electroless Nickel Plating | |||
AHFRR | AHFRRA | AHFRRGA | High Hardness Stainless Steel Hardness: 35HRC or More | — |
Part Number | — | L | — | B | — | S | — | P |
SFMRR30 SFHRR40 SFRRGA20 SF−SSFRR20 | — — — — | 150 230 180 100 | — — — | B6 B10 B10 | — — — | S6 S10 S5 | — | P150 |
Part Number | L 0.1 mm Increments | B·S 0.1 mm Increments | Retaining Ring No. Accessory: Retaining Ring 2 pcs. (Retaining Ring Type only) | ||
Type | D | ||||
Standard | |||||
Without Retaining Ring NSFMRR SFMRR PSFMRR SSFMRR (D13, 17, 18 or 22 is not available for SSFMRR.) | With Retaining Ring NSFMRRA SFMRRA PSFMRRA SSFMRRA (D13, 17, 18 or 22 is not available for SSFMRRA.) | 3 | 15.0 to 150.0 | 2 ≤ B·S < 150 | NETWS2 |
4 | 15.0 to 200.0 | NETWS3 | |||
5 | 15.0 to 250.0 | NETWS4 | |||
6 | 15.0 to 500.0 | NETWS5 | |||
8 | 15.0 to 500.0 | 3 ≤ B·S < 150 | NETWS7 | ||
10 | 15.0 to 800.0 | STWS10 | |||
12 | 15.0 to 900.0 | 4 ≤ B·S < 150 | STWS12 | ||
13 | 15.0 to 900.0 | STWS13 | |||
15 | 15.0 to 1000.0 | STWS15 | |||
16 | 15.0 to 1000.0 | STWS16 | |||
17 | 20.0 to 1000.0 | STWS17 | |||
18 | 20.0 to 1000.0 | STWS18 | |||
20 | 20.0 to 1000.0 | STWS20 | |||
22 | 20.0 to 1000.0 | STWS22 | |||
25 | 20.0 to 1000.0 | 5 ≤ B·S < 150 | STWS25 | ||
30 | 20.0 to 1000.0 | STWS30 | |||
35 | 70.0 to 1000.0 | STWS35 | |||
40 | 80.0 to 1000.0 | STWS40 | |||
50 | 100.0 to 1000.0 | STWS50 |
Part Number | L 0.1 mm Increments | B·S 0.1 mm Increments | Retaining Ring No. Accessory: Retaining Ring 2 pcs. (Retaining Ring Type only) | ||
Type | D | ||||
Standard | |||||
Without Retaining Ring NSFHRR SFHRR PSFHRR SSFHRR | With Retaining Ring NSFHRRA SFHRRA PSFHRRA SSFHRRA | 6 | 15.0 to 500.0 | 2 ≤ B·S < 150 | NETWS5 |
8 | 15.0 to 500.0 | 3 ≤ B·S < 150 | NETWS7 | ||
10 | 15.0 to 800.0 | STWS10 | |||
12 | 15.0 to 900.0 | 4 ≤ B·S < 150 | STWS12 | ||
15 | 15.0 to 1000.0 | STWS15 | |||
17 | 20.0 to 1000.0 | STWS17 | |||
20 | 20.0 to 1000.0 | STWS20 | |||
25 | 20.0 to 1000.0 | 5 ≤ B·S < 150 | STWS25 | ||
30 | 20.0 to 1000.0 | STWS30 | |||
35 | 80.0 to 1000.0 | STWS35 | |||
40 | 80.0 to 1000.0 | STWS40 | |||
50 | 100.0 to 1000.0 | STWS50 |
Part Number | L 0.1 mm Increments | B·S 0.1 mm Increments [ ! ] Standard | P 0.1 mm Increments [ ! ] Retaining Ring Groove | m | d | Retaining Ring No. Accessory: Retaining Ring 2 pcs. (Retaining Ring Type only) | ||||||
Type | D | Tolerance | Tolerance | |||||||||
Standard | Retaining Ring Groove Outside Datum | |||||||||||
Without Retaining Ring NSFRR SFRR PSFRR SSFRR AHFRR (Only * marked numbers are available.) | With Retaining Ring NSFRRA SFRRA PSFRRA SSFRRA HFRRA (D15, 20, 25, 30, 35, 40 or 50 is available for HFRRA) PHFRRA (D15, 20, 25, 30, 35, 40 or 50 is available for PHFRRA) AHFRRA (Only * marked numbers are available.) | With Retaining Ring NSFRRGA SFRRGA PSFRRGA SSFRRGA AHFRRGA (Only * marked numbers are available.) | 2 | 15.0 to 50.0 | 2 ≤ B·S < 150 | 3 ≤ P ≤ L−4 | 0.4 | +0.05 0 | 1.2 | +0.06 0 | NETWS1.2 | |
2.5 | 15.0 to 50.0 | 0.5 | 1.5 | NETWS1.5 | ||||||||
* | 3 | 15.0 to 150.0 | 2 | NETWS2 | ||||||||
* | 4 | 15.0 to 200.0 | 0.7 | +0.1 0 | 3 | NETWS3 | ||||||
* | 5 | 15.0 to 250.0 | 4 | +0.075 0 | NETWS4 | |||||||
* | 6 | 15.0 to 500.0 | 5 | NETWS5 | ||||||||
* | 8 | 15.0 to 500.0 | 3 ≤ B·S < 150 | 5 ≤ P ≤ L−5 | 0.9 | 7 | +0.09 0 | NETWS7 | ||||
* | 10 | 15.0 to 800.0 | 1.15 | 9.6 | 0 -0.09 | STWS10 | ||||||
* | 12 | 15.0 to 900.0 | 4 ≤ B·S < 150 | 7 ≤ P ≤ L−6 | +0.14 0 | 11.5 | 0 -0.11 | STWS12 | ||||
13 | 15.0 to 900.0 | 12.4 | STWS13 | |||||||||
* | 15 | 15.0 to 1000.0 | 14.3 | STWS15 | ||||||||
* | 16 | 15.0 to 1000.0 | 15.2 | STWS16 | ||||||||
17 | 20.0 to 1000.0 | 16.2 | STWS17 | |||||||||
18 | 20.0 to 1000.0 | 1.35 | 17 | STWS18 | ||||||||
* | 20 | 20.0 to 1000.0 | 19 | 0 -0.21 | STWS20 | |||||||
22 | 20.0 to 1000.0 | 21 | STWS22 | |||||||||
* | 25 | 20.0 to 1000.0 | 5 ≤ B·S < 150 | 10 ≤ P ≤ L−8 | 23.9 | STWS25 | ||||||
30 | 20.0 to 1000.0 | 1.65 | 28.6 | STWS30 | ||||||||
35 | 80.0 to 1000.0 | 33 | 0 -0.25 | STWS35 | ||||||||
40 | 80.0 to 1000.0 | 1.9 | 38 | STWS40 | ||||||||
50 | 100.0 to 1000.0 | 2.2 | 47 | STWS50 |
Alterations Code | Alteration Details | Applicable Conditions | Ordering Example | ||||||||||||||||||||||
KC | Keyway at One Location | KC, A = 0.1 mm Increments [ ! ] When the keyway position is less than 1 mm away from the end face, [ NG ] Not applicable when Shaft Dia. ≤ ø5 | SFRRA30-250-B10-S20-KC20-A10 | ||||||||||||||||||||||
WKC | Keyways at Two Locations | WKC, C, K, E = 0.1 mm Increments [ ! ] When the keyway position is less than 1 mm away from the end face, [ NG ] Not applicable when Shaft Dia. ≤ ø5 | SFRRA30-250-B10-S20-WKC25-C20-K35-E10 | ||||||||||||||||||||||
KZ | Keyway (1 Location (for 4th Location)) | KZ, Z = 0.1 mm Increments [ ! ] When the keyway position is less than 1 mm away from the end face, [ ! ] Applicable only when combined with both KC and WKC | SFRRA30-250-B10-S20-KC15-A10-WKC30- C10-K60-E10-KZ100-Z10 | ||||||||||||||||||||||
FC | Set Screw Flat at One Location | FC, G = 1 mm Increments [ ! ]G ≤ 70 | SFRRA30-250-B10-S20-FC10-G3 | ||||||||||||||||||||||
WFC | Set Screw Flats at Two Locations | WFC, J, W, V = 1 mm Increments [ ! ]J·V ≤ 70 | SFRRA30-250-B10-S20-WFC30-J15-W30-V20 | ||||||||||||||||||||||
SFC | Set Screw Flat, 2 Set Screw Flats (Angle Specified) | SFC, SG = 1 mm Increments AG = 15° Increments [ ! ]SG ≤ 70 | SFRRA30-250-B10-S20-SFC20-SG3-AG120 | ||||||||||||||||||||||
KWC | Set Screw Flat, 2 Set Screw Flats on Both Ends | KWC = 1 mm Increments [ NG ] Not applicable when Shaft Dia. ≤ ø6, when D = 13, 16, 17, 18 or 22 [ NG ] Not applicable when L > 680 | SFRRA30-250-B10-S20-KWC10 | ||||||||||||||||||||||
WC | Set Screw Flat, Chamfering Depth Configurable | WC = 0.1 mm Increments [ NG ] Not applicable when Shaft Dia. ≤ ø6, when D = 13, 16, 17, 18 or 22 [ NG ] Not applicable when L > 680 [ ! ] Only when KWC is specified, WC is available
| SFRRA30-250-B10-S20-KWC20-WC22.0 | ||||||||||||||||||||||
UC | Slit Cam Groove | UC = 1 mm Increments [ NG ] Not applicable to D13 or more [ NG ]AHFRR·AHFRRA· Not available for AHFRRGA | SFRRA10-250-B10-S20-UC30 | ||||||||||||||||||||||
LKC | L Dimension Tolerance Change | L < 500···L±0.05 L ≥ 500···L±0.1 [ NG ] Not applicable when L ≥ 800 | SFRRA30-250-B10-S20-LKC | ||||||||||||||||||||||
SC | Wrench Flats | SC = 1 mm Increments [ NG ] Not applicable when D ≤ 5 | SFRRA30-250-B10-S20-SC30 | ||||||||||||||||||||||
CD | Changes Part D Chamfering | Changes Part D Chamfering Size * Select CD from table [ ! ] Only values provided on the Applicable Dia. Table are applicable
| SFRRA30-250-B10-S20-CD2 |
Keyway Dimensions
| |
Detailed Retaining Ring Groove Dimensions for Rotary Shafts
|
| |
D | Center Hardness (HRC) |
3 | 35 or More |
4 | 35 or More |
5 | 35 or More |
6 | 35 or More |
8 | 35 or More |
10 | 30 or More |
12 | 30 or More |
15 | 30 or More |
16 | 30 or More |
20 | 25 or More |
25 | 25 or More |
Material | Tensile Strength (Mpa) | Yielding Point (0.2% Proof Stress) (MPa) | Young's Modulus (GPa) | Transverse Modulus (GPa) | Poisson Ratio |
EN 1.1191 Equiv. | 570 or More | 345 or More | 200 or More | 77 or More | 0.3 |
EN 1.4301 Equiv. | 520 or More | 210 or More | 193 or More | 74 or More | 0.3 |
EN 1.7220 Equiv. | 930 or More | 785 or More | 206 or More | 79 or More | 0.3 |
High Hardness Stainless Steel | 1102 | 715 | 199 | 77 | 0.3 |
C | Si | Mn | P | S | Ni | Cr |
0.15-0.25 | ≤ 0.50 | 7.5-9.5 | ≤ 0.05 | ≥ 0.12 | 1.5-3.0 | 13-15 |
3D preview is not available, because the part number has not yet been determined.
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Material | Hardness | Surface Treatment | D Tolerance | Shaft Dia. D (mm) | Length L (mm) | Type | Included Retaining Ring | B (mm) | P (mm) | S (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 15 | 15 ~ 800 | Standard | Excluded Retaining Ring | 4 ~ 399 | - | 4 ~ 399 | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 16 | 15 ~ 1000 | Standard | Excluded Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 17 | 30 ~ 900 | Standard | Excluded Retaining Ring | 4 ~ 449 | - | 4 ~ 449 | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 18 | 20 ~ 1000 | Standard | Excluded Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 20 | 30 ~ 1000 | Standard | Excluded Retaining Ring | 4 ~ 499 | - | 4 ~ 499 | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 22 | 20 ~ 1000 | Standard | Excluded Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 25 | 80 ~ 1000 | Standard | Excluded Retaining Ring | 5 ~ 499 | - | 5 ~ 499 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 30 | 60 ~ 1000 | Standard | Excluded Retaining Ring | 5 ~ 499 | - | 5 ~ 499 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 35 | 70 ~ 1000 | Standard | Excluded Retaining Ring | 5 ~ 499 | - | 5 ~ 499 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 40 | 80 ~ 1000 | Standard | Excluded Retaining Ring | 5 ~ 499 | - | 5 ~ 499 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 50 | 100 ~ 1000 | Standard | Excluded Retaining Ring | 5 ~ 499 | - | 5 ~ 499 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 2 | 15 ~ 50 | Standard | Included Retaining Ring | 2 ~ 24 | - | 2 ~ 24 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 2.5 | 15 ~ 50 | Standard | Included Retaining Ring | 2 ~ 24 | - | 2 ~ 24 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 3 | 15 ~ 150 | Standard | Included Retaining Ring | 2 ~ 74 | - | 2 ~ 74 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 4 | 15 ~ 200 | Standard | Included Retaining Ring | 2 ~ 99 | - | 2 ~ 99 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 5 | 15 ~ 250 | Standard | Included Retaining Ring | 2 ~ 124 | - | 2 ~ 124 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 6 | 15 ~ 400 | Standard | Included Retaining Ring | 2 ~ 199 | - | 2 ~ 199 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 8 | 15 ~ 500 | Standard | Included Retaining Ring | 3 ~ 249 | - | 3 ~ 249 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 10 | 15 ~ 600 | Standard | Included Retaining Ring | 3 ~ 299 | - | 3 ~ 299 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 12 | 15 ~ 700 | Standard | Included Retaining Ring | 4 ~ 349 | - | 4 ~ 349 | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 13 | 15 ~ 900 | Standard | Included Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 15 | 15 ~ 800 | Standard | Included Retaining Ring | 4 ~ 399 | - | 4 ~ 399 | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 16 | 15 ~ 1000 | Standard | Included Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 17 | 30 ~ 900 | Standard | Included Retaining Ring | 4 ~ 449 | - | 4 ~ 449 | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 18 | 20 ~ 1000 | Standard | Included Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 20 | 30 ~ 1000 | Standard | Included Retaining Ring | 4 ~ 499 | - | 4 ~ 499 | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 22 | 20 ~ 1000 | Standard | Included Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 25 | 80 ~ 1000 | Standard | Included Retaining Ring | 5 ~ 499 | - | 5 ~ 499 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 30 | 60 ~ 1000 | Standard | Included Retaining Ring | 5 ~ 499 | - | 5 ~ 499 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 35 | 70 ~ 1000 | Standard | Included Retaining Ring | 5 ~ 499 | - | 5 ~ 499 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 40 | 80 ~ 1000 | Standard | Included Retaining Ring | 5 ~ 499 | - | 5 ~ 499 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 50 | 100 ~ 1000 | Standard | Included Retaining Ring | 5 ~ 499 | - | 5 ~ 499 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 2 | 15 ~ 50 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 3 ~ 46 | - | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 2.5 | 15 ~ 50 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 3 ~ 46 | - | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 3 | 15 ~ 150 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 3 ~ 146 | - | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 4 | 15 ~ 200 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 3 ~ 196 | - | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 5 | 15 ~ 250 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 3 ~ 246 | - | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 6 | 15 ~ 400 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 3 ~ 296 | - | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 8 | 15 ~ 500 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 5 ~ 395 | - | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 10 | 15 ~ 600 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 5 ~ 495 | - | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 12 | 15 ~ 700 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 7 ~ 594 | - | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 13 | 15 ~ 900 | Retaining Ring Groove Outside Datum | Included Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 15 | 15 ~ 800 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 7 ~ 694 | - | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 16 | 15 ~ 1000 | Retaining Ring Groove Outside Datum | Included Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 17 | 30 ~ 900 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 7 ~ 794 | - | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 18 | 20 ~ 1000 | Retaining Ring Groove Outside Datum | Included Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 20 | 30 ~ 1000 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 7 ~ 794 | - | ||
- | 1 | 6 Days | - | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 22 | 20 ~ 1000 | Retaining Ring Groove Outside Datum | Included Retaining Ring | 2 ~ 150 | - | 2 ~ 150 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 25 | 80 ~ 1000 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 10 ~ 792 | - | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 30 | 60 ~ 1000 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 10 ~ 792 | - | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 35 | 70 ~ 1000 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 10 ~ 792 | - | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 40 | 80 ~ 1000 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 10 ~ 792 | - | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 50 | 100 ~ 1000 | Retaining Ring Groove Outside Datum | Included Retaining Ring | - | 10 ~ 792 | - |
Loading...
Basic Shape | Straight | Environmentally friendly | RoHS Compliant (10 Substances) | End Shape (Left) | With Retaining Ring Grooves |
---|---|---|---|---|---|
Characteristics/Applications | Not Applicable | End Shape (Right) | With Retaining Ring Grooves | Keyway | Keyway Option (Alteration) |
Cleaning Method | No Cleaning | Wrench Flats | Wrench flats option (alteration) |
Configure
Basic Attributes
Material
Hardness
Surface Treatment
Shaft Dia. D(mm)
Length L(mm)
Type
Included Retaining Ring
B(mm)
P(mm)
S(mm)
Type
D Tolerance
Filter by CAD data type
Filter by standard shipping days
Optional Attributes