Rotary Axes / Two-Sided Internal Thread / Optional Machining (Part Numbers - CAD Download)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

Rotary Shaft - Both Ends Tapped Dimensional Drawing 1
■ Standard
■Wrench Flats
[ ! ] Surface roughness of Part D for h9 (Cold-drawn) is {{{attr2}}}. Surface roughness for h7 (Ground) and g6 (Ground) is {{{attr3}}}.
■Tolerance Table
Dh9 (Cold-drawn)h7 (Ground)g6 (Ground)
4 to 600−0.004
−0.030−0.012−0.012
8·1000−0.005
−0.036−0.015−0.014
12 to 1800−0.006
−0.043−0.018−0.017
20 to 3000−0.007
−0.052−0.021−0.020
35 to 5000−0.009
−0.062−0.025−0.025
Rotary Shaft - Both Ends Tapped Dimensional Drawing 2
■Circularity and Straightness
■Perpendicularity
■Circularity of Part D
DCircularity
M
overor Less
3130.004
13200.005
20400.006
40500.007
■Straightness
DStraightness
K
2·2.50.1
3·40.03
50.02
6 or more0.01
■Tolerances of L and Other Dimensions
DimensionDimension
Tolerance
overor Less
26±0.1
630±0.2
30120±0.3
120400±0.5
4001000±0.8
[ ! ] Circularity, straightness, and perpendicularity of Part D are not applicable to h9 (Cold-drawn).
TypeD Tolerance[M] Material[S] Surface Treatment
 StandardWrench Flats
(1)NSFMRWNSFMRWSh9 (Cold-drawn)EN 1.1191 Equiv.
SFMRWSFMRWSBlack Oxide
PSFMRWPSFMRWSElectroless Nickel Plating
SSFMRWSSFMRWSEN 1.4301 Equiv.
(2)NSFHRWNSFHRWSh7 (Ground)EN 1.1191 Equiv.
SFHRWSFHRWSBlack Oxide
PSFHRWPSFHRWSElectroless Nickel Plating
SSFHRWSSFHRWSEN 1.4301 Equiv.
(3)NSFRWNSFRWSg6 (Ground)EN 1.1191 Equiv.
SFRWSFRWSBlack Oxide
PSFRWPSFRWSElectroless Nickel Plating
SSFRWSSFRWSEN 1.4301 Equiv.
HFRWHFRWSEN 1.7220 Equiv.
[H]Hardness: 30 to 35HRC
Black Oxide
PHFRWElectroless Nickel Plating
AHFRWAHFRWSHigh Hardness Stainless Steel
Hardness: 35HRC or More
[!] High hardness stainless steel has a lower center hardness.

Specification Table

Part NumberLMNSC
SFMRW30250M12N10  
SFHRWS25200M8N12SC20
(1) h9 (Cold-drawn)
Part NumberL
0.1 mm Increments
M (coarse), N (Coarse)
Selection
SC
1 mm Increments
Wrench Flats Type only
W2
TypeD
StandardWrench Flats
NSFMRW

SFMRW

PSFMRW

SSFMRW

(D4, 5, 13, 17, 18, or 22 is not available for SSFMRW.)
 
NSFMRWS

SFMRWS

PSFMRWS


SSFMRWS
(D13, 17, 18, or 22 are not available for SSFMRWS.)
 

(Wrench flats are not available for D4 and D5.)
415.0 to 200.02            
515.0 to 250.022.63          
615.0 to 500.0 2.634         SC+ℓ2 ≤ L

SC = 0
or SC ≥ 1


[ ! ] When SC ≤ M × 3,
W−M ≥ 2
58
815.0 to 500.0 2.63456       7
1015.0 to 800.0  3456       8
1215.0 to 900.0  34568      1010
1315.0 to 900.0  34568      11
1515.0 to 1000.0  3456810     13
1615.0 to 1000.0   45681012    14
1720.0 to 1000.0   45681012    
1820.0 to 1000.0   45681012    15
2020.0 to 1000.0   4568101216   17
2220.0 to 1000.0   4568101216   19
2520.0 to 1000.0   4568101216   22
3020.0 to 1000.0    56810121620  2715
3570.0 to 1000.0     681012162024 30
4080.0 to 1000.0       1012162024303620
50100.0 to 1000.0        121620243041
[ ! ] L ≥ M × 2 + N × 2 is required.
[!] When L ≤ (M × 2 + pilot hole depth) + (N × 2 + pilot hole depth), the tapped pilot hole is through, and the priority is given to the large tap effective length, so the small tap effective length becomes shorter. (For MD and ND, L ≤ (MD × 3 + pilot hole depth) + (ND × 3 + pilot hole depth).)

(2) h7 (Ground)
Part NumberL
0.1 mm Increments
M (coarse), N (Coarse)
Selection
SC
1 mm Increments
Wrench Flats Type only
W2
TypeD
StandardWrench Flats



NSFHRW

SFHRW

PSFHRW

SSFHRW



NSFHRWS

SFHRWS

PSFHRWS

SSFHRWS



(Wrench flats are not available for D4 and D5.)
415.0 to 200.02            
515.0 to 250.022.63          
615.0 to 500.0 2.634         SC+ℓ2 ≤ L

SC = 0
or SC ≥ 1


[ ! ] When SC ≤ M × 3,
W−M ≥ 2
58
815.0 to 500.0 2.63456       7
1015.0 to 800.0  3456       8
1215.0 to 900.0  34568      1010
1515.0 to 1000.0  3456810     13
1720.0 to 1000.0   45681012    14
2020.0 to 1000.0   4568101216   17
2520.0 to 1000.0   4568101216   22
3020.0 to 1000.0    56810121620  2715
3570.0 to 1000.0     681012162024 30
4080.0 to 1000.0       1012162024303620
50100.0 to 1000.0        121620243041
[ ! ] L ≥ M × 2 + N × 2 is required.
[!] When L ≤ (M × 2 + pilot hole depth) + (N × 2 + pilot hole depth), the tapped pilot hole is through, and the priority is given to the large tap effective length, so the small tap effective length becomes shorter. (For MD and ND, L ≤ (MD × 3 + pilot hole depth) + (ND × 3 + pilot hole depth).)

(3) g6 (Ground)
Part NumberL
0.1 mm Increments
M (coarse), N (Coarse)
Selection
SC
1 mm Increments
Wrench Flats Type only
W2
TypeD
StandardWrench Flats
NSFRW

SFRW

PSFRW

SSFRW


HFRW
(D15, 20, 25, 30, 35, 40, and 50 are available for HFRW.)
 

PHFRW
(D15, 20, 25, 30, 35, 40, and 50 are available for PHFRW.)
 

AHFRW
(Only * marked sizes are available.)
NSFRWS

SFRWS

PSFRWS

SSFRWS


HFRWS
(D15, 20, 25, 30, 35, 40, or 50 is available for HFRWS.)
 

AHFRWS
(Only * marked sizes are available.)

(Wrench flats are not available for D4 and D5.)
* 415.0 to 200.02            
* 515.0 to 250.022.63          
* 615.0 to 500.0 2.634         SC+ℓ2 ≤ L
SC = 0
or SC ≥ 1


[ ! ] When SC ≤ M × 3,
W−M ≥ 2
58
* 815.0 to 500.0 2.63456       7
*1015.0 to 800.0  3456       8
*1215.0 to 900.0  34568      1010
 1315.0 to 900.0  34568      11
*1515.0 to 1000.0  3456810     13
*1615.0 to 1000.0   45681012    14
 1720.0 to 1000.0   45681012    
 1820.0 to 1000.0   45681012    15
*2020.0 to 1000.0   4568101216   17
 2220.0 to 1000.0   4568101216   19
*2520.0 to 1000.0   4568101216   22
 3020.0 to 1000.0    56810121620  2715
 3570.0 to 1000.0     681012162024 30
 4080.0 to 1000.0       1012162024303620
 50100.0 to 1000.0        121620243041
[ ! ] L ≥ M × 2 + N × 2 is required.
[!] When L ≤ (M × 2 + pilot hole depth) + (N × 2 + pilot hole depth), the tapped pilot hole is through, and the priority is given to the large tap effective length, so the small tap effective length becomes shorter. (For MD and ND, L ≤ (MD × 3 + pilot hole depth) + (ND × 3 + pilot hole depth).)
[NG] For HFRW and PHFRW, the upper limit for L dim. 35 to 50 is 800.
Coarse Thread Pitch
MPitch
20.4
2.60.45
30.5
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5

Alterations

Alterations
Code
Alteration DetailsApplicable ConditionsOrdering Example
KCKeyway at One Location
Rotary Shaft - Both Ends Tapped: Related Image
KC, A = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.

[ ! ] Key Length ≤ 100
[ NG ] Not applicable when Shaft Dia. ≤ ø5
SFHRW30-250-M10-N10-KC20-A10
WKCKeyways at Two Locations
Rotary Shaft - Both Ends Tapped: Related Image
WKC, C, K, E = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.

[ ! ] Key Length ≤ 100
[ NG ] Not applicable when Shaft Dia. ≤ ø5
SFHRW30-250-M10-N10-WKC5-C20-K5-E10
KZKeyway (1 Location (for 4th Location))
Rotary Shaft - Both Ends Tapped: Related Image
KZ, Z = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.

[ ! ] Key Length ≤ 100 [ NG ] Not applicable when Shaft Dia. ≤ ø5
[ ! ] Applicable only when combined with both KC and WKC
SFHRW30-250-M10-N10-KC20-A10-WKC50-C10-K60-E10-KZ100-Z10
FCSet Screw Flat at One Location
Rotary Shaft - Both Ends Tapped: Related Image
FC, G = 1 mm Increments
[ ! ]G ≤ 70
SFHRW30-250-M10-N10-FC10-G3
WFCSet Screw Flats at Two Locations
Rotary Shaft - Both Ends Tapped: Related Image
WFC, J, W, V = 1 mm Increments
[ ! ]J·V ≤ 70
SFHRW30-250-M10-N10-WFC10-J15-W10-V20
SFCSet Screw Flat, 2 Set Screw Flats (Angle Specified)
Rotary Shaft - Both Ends Tapped: Related Image
SFC, SG = 1 mm Increments AG = 15° Increments
[ ! ]SG ≤ 70
SFHRW30-250-M10-N10-SFC10-SG3-AG120
UCSlit Cam Groove
Rotary Shaft - Both Ends Tapped: Related Image
UC = 1 mm Increments
[NG] Not applicable when Shaft Dia. = ø2 or ø2.5 or when D ≥ 13
[NG] AHFRW or AHFRWS is not available
SFHRW10-250-M80-N8-UC10
TA·TBRetaining Ring Groove
Rotary Shaft - Both Ends Tapped: Related Image
TA, TB = 0.1 mm Increments
[ ! ]2 ≤ TA·TB ≤ 150
SFHRW30-250-M10-N10-TB10
LKCL Dimension Tolerance Change
Rotary Shaft - Both Ends Tapped: Related Image
L < 500···L±0.05 L ≥ 500···L±0.1
[ NG ] Not applicable when L ≥ 800
SFHRW30-250-M10-N10-LKC
MD·NDTapped Depth
Rotary Shaft - Both Ends Tapped: Related Image
To specify any of these Alterations, replace M with MD or N with ND
[NG] Not applicable when M = 2, 2.6, 24 or 30
SFHRW30-250-MD10-ND10

[!] When combined with other alterations, ± 2 degree phase differential may occur. Provide 2 mm or more clearance between this alteration and others.
[ ! ] When multiple keyways or set screw flats are specified, they are added in the same plane. When the distance of the alterations are over 500 mm, ± 2 degree phase difference may occur.
Keyway Dimensions
Shaft Dia.btr
Reference DimensionTolerance (N9)Reference DimensionTolerance
6 to 72   -0.004
   -0.029
1.2 +0.1
   0
0.08 to 0.16
8 to 1031.8
11 to 124    0
   -0.03
2.5
13 to 1753.00.16 to 0.25
18 to 2263.5
23 to 308    0
   -0.036
4.0 +0.2
   0
31 to 38105.00.25 to 0.4
39 to 4412    0
   -0.043
5.0
45 to 50145.5
 
[ ! ] b ≤ A, E, C ≤ 100
[ ! ] If 3 keyways are required, use both KC and WKC.
[!] If 4 keyways are required, use KC, WKC, and KZ. (KZ is applicable only when combined with both KC and WKC)
[NG] Not applicable to D = 2 to 5.
[ ! ] The example below shows the keyway shape for the specs KC, WKC, K = 0, KC + A ≥ L and WKC + C + K + E > L.
[ ! ] Although keyway(s) and set screw flats are added in the same plane, ±2 degree phase differential may occur.
[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.
Detailed Retaining Ring Groove Dimensions for Rotary Shafts
Shaft Dia.d ToleranceSlot Width (m) ToleranceApplicable Retaining Ring
21.2 +0.06
    0
0.4 +0.05
    0
JIS E Type 1.2
2.51.50.5JIS E Type 1.5
32JIS E Type 2
430.7 +0.1
    0
JIS E Type 3
54 +0.075
    0
JIS E Type 4
65JIS E Type 5
760.9JIS E Type 6
87 +0.09
    0
JIS E Type 7
98JIS E Type 8
109.60/-0.091.15 +0.14
    0
JIS C Type 10
1110.5   0
  -0.11
JIS C Type 11
1211.5JIS C Type 12
1312.4JIS C Type 13
1413.4JIS C Type 14
1514.3JIS C Type 15
1615.2JIS C Type 16
1716.2JIS C Type 17
18171.35JIS C Type 18
1918JIS C Type 19
 
Shaft Dia.d ToleranceSlot Width (m) ToleranceApplicable Retaining Ring
2019  0
 -0.21
1.35 +0.14
    0
JIS C Type 20
2120JIS C Type 21
2221JIS C Type 22
2322JIS C Type 23
2422.9JIS C Type 24
2523.9JIS C Type 25
2624.9JIS C Type 26
2826.61.65JIS C Type 28
2927.6JIS C Type 29
3028.6JIS C Type 30
3230.3  0
 -0.25
JIS C Type 32
3533JIS C Type 35
40381.9JIS C Type 40
4542.5JIS C Type 45
50472.2JIS C Type 50
 
 
 
 
 
 
 
 
 

 

[ ! ]2 ≤ TA·TB ≤ 150
[ ! ] An applicable retaining ring is included in the retaining ring groove.
(Reference Value) High Hardness Stainless Steel Center Hardness
DCenter Hardness (HRC)
335 or More
435 or More
535 or More
635 or More
835 or More
1030 or More
1230 or More
1530 or More
1630 or More
2025 or More
2525 or More
Mechanical Properties (Reference Value)
MaterialTensile Strength
(Mpa)
Yielding Point
(0.2% Proof Stress)
(MPa)
Young's Modulus
(GPa)
Transverse Modulus
(GPa)
Poisson Ratio
EN 1.1191 Equiv.
570 or More
345 or More
200 or More
77 or More
0.3
EN 1.4301 Equiv.
520 or More
210 or More
193 or More
74 or More
0.3
EN 1.7220 Equiv.
930 or More
785 or More
206 or More
79 or More
0.3
High Hardness Stainless Steel
1102
715
199
77
0.3

High Hardness Stainless Steel Material Properties
(Unit: %)
CSiMnPSNiCr
0.15-0.25≤ 0.507.5-9.5≤ 0.05≥ 0.121.5-3.013-15

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
SSFHRW6-[15-400/0.1]-M[2.6,​3,​4]-ND[3,​4]
SSFHRW6-[15-400/0.1]-MD[3,​4]-N[2.6,​3,​4]
SSFHRW6-[15-400/0.1]-MD[3,​4]-ND[3,​4]
SSFHRW8-[15-500/0.1]-M[2.6,​3,​4,​5,​6]-N[2.6,​3,​4,​5,​6]
SSFHRW8-[15-500/0.1]-M[2.6,​3,​4,​5,​6]-ND[3,​4,​5,​6]
SSFHRW8-[15-500/0.1]-MD[3,​4,​5,​6]-N[2.6,​3,​4,​5,​6]
SSFHRW8-[15-500/0.1]-MD[3,​4,​5,​6]-ND[3,​4,​5,​6]
SSFHRW10-[15-600/0.1]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
SSFHRW10-[15-600/0.1]-M[3,​4,​5,​6]-ND[3,​4,​5,​6]
SSFHRW10-[15-600/0.1]-MD[3,​4,​5,​6]-N[3,​4,​5,​6]
SSFHRW10-[15-600/0.1]-MD[3,​4,​5,​6]-ND[3,​4,​5,​6]
SSFHRW12-[15-700/0.1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
SSFHRW12-[15-700/0.1]-M[4,​5,​6,​8]-ND[4,​5,​6,​8]
SSFHRW12-[15-700/0.1]-MD[4,​5,​6,​8]-N[4,​5,​6,​8]
SSFHRW12-[15-700/0.1]-MD[4,​5,​6,​8]-ND[4,​5,​6,​8]
SSFHRW15-[15-800/0.1]-M[4,​5,​6,​8,​10]-N[4,​5,​6,​8,​10]
SSFHRW15-[15-800/0.1]-M[4,​5,​6,​8,​10]-ND[4,​5,​6,​8,​10]
SSFHRW15-[15-800/0.1]-MD[4,​5,​6,​8,​10]-N[4,​5,​6,​8,​10]
SSFHRW15-[15-800/0.1]-MD[4,​5,​6,​8,​10]-ND[4,​5,​6,​8,​10]
SSFHRW17-[30-900/0.1]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]
SSFHRW17-[30-900/0.1]-M[4,​5,​6,​8,​10,​12]-ND[4,​5,​6,​8,​10,​12]
SSFHRW17-[30-900/0.1]-MD[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]
SSFHRW17-[30-900/0.1]-MD[4,​5,​6,​8,​10,​12]-ND[4,​5,​6,​8,​10,​12]
SSFHRW20-[30-1000/0.1]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
SSFHRW20-[30-1000/0.1]-M[4,​5,​6,​8,​10,​12,​16]-ND[4,​5,​6,​8,​10,​12,​16]
SSFHRW20-[30-1000/0.1]-MD[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
SSFHRW20-[30-1000/0.1]-MD[4,​5,​6,​8,​10,​12,​16]-ND[4,​5,​6,​8,​10,​12,​16]
SSFHRW25-[50-1000/0.1]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
SSFHRW25-[50-1000/0.1]-M[4,​5,​6,​8,​10,​12,​16]-ND[4,​5,​6,​8,​10,​12,​16]
SSFHRW25-[50-1000/0.1]-MD[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
SSFHRW25-[50-1000/0.1]-MD[4,​5,​6,​8,​10,​12,​16]-ND[4,​5,​6,​8,​10,​12,​16]
SSFHRW30-[60-1000/0.1]-M[6,​8,​10,​12,​16,​20]-N[6,​8,​10,​12,​16,​20]
SSFHRW30-[60-1000/0.1]-M[6,​8,​10,​12,​16,​20]-ND[6,​8,​10,​12,​16,​20]
SSFHRW30-[60-1000/0.1]-MD[6,​8,​10,​12,​16,​20]-N[6,​8,​10,​12,​16,​20]
SSFHRW30-[60-1000/0.1]-MD[6,​8,​10,​12,​16,​20]-ND[6,​8,​10,​12,​16,​20]
SSFHRW35-[70-1000/0.1]-M[6,​8,​10,​12,​16,​20,​24]-N[6,​8,​10,​12,​16,​20,​24]
SSFHRW35-[70-1000/0.1]-M[6,​8,​10,​12,​16,​20,​24]-ND[6,​8,​10,​12,​16,​20]
SSFHRW35-[70-1000/0.1]-MD[6,​8,​10,​12,​16,​20]-N[6,​8,​10,​12,​16,​20,​24]
SSFHRW35-[70-1000/0.1]-MD[6,​8,​10,​12,​16,​20]-ND[6,​8,​10,​12,​16,​20]
SSFHRW40-[80-1000/0.1]-M[10,​12,​16,​20,​24,​30]-N[10,​12,​16,​20,​24,​30]
SSFHRW40-[80-1000/0.1]-M[10,​12,​16,​20,​24,​30]-ND[10,​12,​16,​20]
SSFHRW40-[80-1000/0.1]-MD[10,​12,​16,​20]-N[10,​12,​16,​20,​24,​30]
SSFHRW40-[80-1000/0.1]-MD[10,​12,​16,​20]-ND[10,​12,​16,​20]
SSFHRW50-[100-1000/0.1]-M[12,​16,​20,​24,​30]-N[12,​16,​20,​24,​30]
SSFHRW50-[100-1000/0.1]-M[12,​16,​20,​24,​30]-ND[12,​16,​20]
SSFHRW50-[100-1000/0.1]-MD[12,​16,​20]-N[12,​16,​20,​24,​30]
SSFHRW50-[100-1000/0.1]-MD[12,​16,​20]-ND[12,​16,​20]
SSFHRWS6-[15-400/0.1]-M[2.6,​3,​4]-N[2.6,​3,​4]-SC[0-392/1]
SSFHRWS6-[15-400/0.1]-M[2.6,​3,​4]-ND[3,​4]-SC[0-392/1]
SSFHRWS6-[15-400/0.1]-MD[3,​4]-N[2.6,​3,​4]-SC[0-392/1]
SSFHRWS6-[15-400/0.1]-MD[3,​4]-ND[3,​4]-SC[0-392/1]
SSFHRWS8-[15-500/0.1]-M[2.6,​3,​4,​5,​6]-N[2.6,​3,​4,​5,​6]-SC[0-492/1]
SSFHRWS8-[15-500/0.1]-M[2.6,​3,​4,​5,​6]-ND[3,​4,​5,​6]-SC[0-492/1]
SSFHRWS8-[15-500/0.1]-MD[3,​4,​5,​6]-N[2.6,​3,​4,​5,​6]-SC[0-492/1]
SSFHRWS8-[15-500/0.1]-MD[3,​4,​5,​6]-ND[3,​4,​5,​6]-SC[0-492/1]
SSFHRWS10-[15-600/0.1]-M[3,​4,​5,​6]-N[3,​4,​5,​6]-SC[0-592/1]
SSFHRWS10-[15-600/0.1]-M[3,​4,​5,​6]-ND[3,​4,​5,​6]-SC[0-592/1]
SSFHRWS10-[15-600/0.1]-MD[3,​4,​5,​6]-N[3,​4,​5,​6]-SC[0-592/1]
SSFHRWS10-[15-600/0.1]-MD[3,​4,​5,​6]-ND[3,​4,​5,​6]-SC[0-592/1]
SSFHRWS12-[15-700/0.1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]-SC[0-690/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Hardness Surface Treatment D Tolerance Shaft Dia. D
(mm)
Length L
(mm)
Wrench Flats Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M]
(mm)
Tapped (Coarse / Effective Length: Nominal Diameter × 3) [MD]
(mm)
Tapped (Coarse / Effective Length: Nominal Diameter × 2) [N]
(mm)
Tapped (Coarse / Effective Length: Nominal Diameter × 3) [ND]
(mm)
Wrench Flats Machining [SC]
(mm)

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)615 ~ 400W/o Wrench Flats2.6 ~ 4--3 ~ 4-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)615 ~ 400W/o Wrench Flats-3 ~ 42.6 ~ 4--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)615 ~ 400W/o Wrench Flats-3 ~ 4-3 ~ 4-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)815 ~ 500W/o Wrench Flats2.6 ~ 6-2.6 ~ 6--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)815 ~ 500W/o Wrench Flats2.6 ~ 6--3 ~ 6-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)815 ~ 500W/o Wrench Flats-3 ~ 62.6 ~ 6--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)815 ~ 500W/o Wrench Flats-3 ~ 6-3 ~ 6-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1015 ~ 600W/o Wrench Flats3 ~ 6-3 ~ 6--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1015 ~ 600W/o Wrench Flats3 ~ 6--3 ~ 6-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1015 ~ 600W/o Wrench Flats-3 ~ 63 ~ 6--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1015 ~ 600W/o Wrench Flats-3 ~ 6-3 ~ 6-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1215 ~ 700W/o Wrench Flats4 ~ 8-4 ~ 8--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1215 ~ 700W/o Wrench Flats4 ~ 8--4 ~ 8-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1215 ~ 700W/o Wrench Flats-4 ~ 84 ~ 8--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1215 ~ 700W/o Wrench Flats-4 ~ 8-4 ~ 8-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1515 ~ 800W/o Wrench Flats4 ~ 10-4 ~ 10--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1515 ~ 800W/o Wrench Flats4 ~ 10--4 ~ 10-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1515 ~ 800W/o Wrench Flats-4 ~ 104 ~ 10--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1515 ~ 800W/o Wrench Flats-4 ~ 10-4 ~ 10-

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1730 ~ 900W/o Wrench Flats4 ~ 12-4 ~ 12--

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1730 ~ 900W/o Wrench Flats4 ~ 12--4 ~ 12-

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1730 ~ 900W/o Wrench Flats-4 ~ 124 ~ 12--

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1730 ~ 900W/o Wrench Flats-4 ~ 12-4 ~ 12-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)2030 ~ 1000W/o Wrench Flats4 ~ 16-4 ~ 16--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)2030 ~ 1000W/o Wrench Flats4 ~ 16--4 ~ 16-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)2030 ~ 1000W/o Wrench Flats-4 ~ 164 ~ 16--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)2030 ~ 1000W/o Wrench Flats-4 ~ 16-4 ~ 16-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)2550 ~ 1000W/o Wrench Flats4 ~ 16-4 ~ 16--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)2550 ~ 1000W/o Wrench Flats4 ~ 16--4 ~ 16-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)2550 ~ 1000W/o Wrench Flats-4 ~ 164 ~ 16--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)2550 ~ 1000W/o Wrench Flats-4 ~ 16-4 ~ 16-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)3060 ~ 1000W/o Wrench Flats6 ~ 20-6 ~ 20--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)3060 ~ 1000W/o Wrench Flats6 ~ 20--6 ~ 20-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)3060 ~ 1000W/o Wrench Flats-6 ~ 206 ~ 20--

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)3060 ~ 1000W/o Wrench Flats-6 ~ 20-6 ~ 20-

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)3570 ~ 1000W/o Wrench Flats6 ~ 24-6 ~ 24--

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)3570 ~ 1000W/o Wrench Flats6 ~ 24--6 ~ 20-

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)3570 ~ 1000W/o Wrench Flats-6 ~ 206 ~ 24--

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)3570 ~ 1000W/o Wrench Flats-6 ~ 20-6 ~ 20-

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)4080 ~ 1000W/o Wrench Flats10 ~ 30-10 ~ 30--

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)4080 ~ 1000W/o Wrench Flats10 ~ 30--10 ~ 20-

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)4080 ~ 1000W/o Wrench Flats-10 ~ 2010 ~ 30--

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)4080 ~ 1000W/o Wrench Flats-10 ~ 20-10 ~ 20-

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)50100 ~ 1000W/o Wrench Flats12 ~ 30-12 ~ 30--

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)50100 ~ 1000W/o Wrench Flats12 ~ 30--12 ~ 20-

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)50100 ~ 1000W/o Wrench Flats-12 ~ 2012 ~ 30--

-

1 6 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)50100 ~ 1000W/o Wrench Flats-12 ~ 20-12 ~ 20-

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)615 ~ 400With Wrench Flats2.6 ~ 4-2.6 ~ 4-0 ~ 392

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)615 ~ 400With Wrench Flats2.6 ~ 4--3 ~ 40 ~ 392

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)615 ~ 400With Wrench Flats-3 ~ 42.6 ~ 4-0 ~ 392

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)615 ~ 400With Wrench Flats-3 ~ 4-3 ~ 40 ~ 392

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)815 ~ 500With Wrench Flats2.6 ~ 6-2.6 ~ 6-0 ~ 492

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)815 ~ 500With Wrench Flats2.6 ~ 6--3 ~ 60 ~ 492

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)815 ~ 500With Wrench Flats-3 ~ 62.6 ~ 6-0 ~ 492

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)815 ~ 500With Wrench Flats-3 ~ 6-3 ~ 60 ~ 492

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1015 ~ 600With Wrench Flats3 ~ 6-3 ~ 6-0 ~ 592

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1015 ~ 600With Wrench Flats3 ~ 6--3 ~ 60 ~ 592

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1015 ~ 600With Wrench Flats-3 ~ 63 ~ 6-0 ~ 592

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1015 ~ 600With Wrench Flats-3 ~ 6-3 ~ 60 ~ 592

-

1 4 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedNAh7 (Ground)1215 ~ 700With Wrench Flats4 ~ 8-4 ~ 8-0 ~ 690

Loading...

App. Example

Rotary Shaft - Both Ends Tapped: Related Image

Basic information

Basic Shape Straight Environmentally friendly RoHS Compliant (10 Substances) End Shape (Left) Tapped
Characteristics/Applications Not Applicable End Shape (Right) Tapped Keyway Keyway Option (Alteration)
Cleaning Method No Cleaning

Complementary Products

MISUMI Unit еxample related to this product

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360