Confirmado
- Pin Material
- Steel
- EN 1.1191 Equiv.
- O.D. M(mm)
- 8
- Stroke (S)(mm)
- 10
- Thread Locking Compound
- Main Body Surface Treatment
- Initial Load (Range)(N)
- Min. Load(N)
- 3
- Type
- CAD
- 2D
- 3D
Spring Plungers / Standard (PJL8-10)
Cuidado
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Desenho de contorno e tabela de especificações
* Applicable only to with thread locking compound
[!] Thread Locking Treatment is
where anaerobic thread locking compound in micro
capsules is used to retain the threads. Once parts
have been loosened, adhesion is lost.
Use an anaerobic thread locking compound when
reassembling.
[!] The thread locking is
most effective by leaving the parts for 24 hours
or more and in 25°C. It should be noted if the parts
are left for short period of time and in low temperature,
the thread locking compound will be less-effective.
[ ! ] Do not use the rear hex socket at the time of mounting or removal.
[ ! ] Electroless Nickel Plating for only M3 and M4.
Load
min.
max.
| Load Category | TYPE | Body | Pin | Spring | Operating Temperature | |||||||
| With Thread Locking Compound | No Thread Locking Compound | |||||||||||
| M5 to M30 | M3 to M4 | M5 to M16 | [M] Material | [H] Hardness | [S] Surface Treatment | [M] Material | [H] Hardness | [S] Surface Treatment | [M] Material | |||
| Steel Nose | Ultra Light Load | PJS | PJS-N | M3 to M12:EN 1.7220 Equiv. M16:EN 1.1191 Equiv. | 29 to 35HRC | Black Oxide | EN 1.1191 Equiv. | 57 to 63HRC (Carburized) | Trivalent Chromate | JIS−SWP−B | -30 to 80°C | |
| Light Load | PJL | PJL-N | ||||||||||
| Heavy Load | PJH | PJH-N | Black Oxide | |||||||||
| Extra Heavy Load | PJX | PJX-N | Nickel Plating | |||||||||
| Plastic Nose | Ultra Light Load | NPJS | NPJS-N | Black Oxide | Polyacetal | - | - | |||||
| Light Load | NPJL | NPJL-N | ||||||||||
| Heavy Load | NPJH | NPJH-N | ||||||||||
| Extra Heavy Load | NPJX | — | Nickel Plating | |||||||||
Specification Table
| Part Number |
| NPJH3−1.5 PJS−N10−5 |
■With Thread Locking Compound
| Part Number | d | ℓ | L | B | Ultra Light Load | Light Load | Heavy Load | Extra Heavy Load | |||||||
| TYPE | M (Coarse Thread) | S | Ultra Light / Light / Heavy Load | Extremely Heavy Load | min. N max. Load | min. N max. Load | min. N max. Load | min. N max. Load | |||||||
| (Steep Tip) PJS (* only) PJL PJH PJX (* only) (Plastic Tip) NPJS (* only) NPJL (* only) NPJH (* only) NPJX (* only) | 5 | **3 | 2 | 20 (27) | 20 | 27 | 1.5 | 0.74 | 2.95 | 1.5 | 9.8 | 2 | 22.5 | 11 | 30.4 |
| **5 | 2 | 27 (39) | 27 | 39 | 1.5 | 0.72 | 2.95 | 1.6 | 10.4 | 2.5 | 23.4 | 11.6 | 31.5 | ||
| 6 | **3 | 2.5 | 25 (30) | 25 | 30 | 2 | 0.85 | 3.2 | 3.4 | 10.4 | 12.5 | 33.8 | 17.2 | 46.6 | |
| **5 | 2.5 | 30 (36) | 30 | 36 | 2 | 0.85 | 3.2 | 1.9 | 9.7 | 6.2 | 32.6 | 16.8 | 47.4 | ||
| 10 | 2.5 | 30 | 39 | - | 2 | - | - | 1.5 | 10.9 | 5 | 32.7 | - | - | ||
| 8 | **3 | 3.1 | 25 (27) | 25 | 27 | 2.5 | 0.9 | 3.3 | 3.5 | 9.4 | 11.7 | 31.2 | 28.1 | 56.9 | |
| **5 | 3.1 | 27 (30) | 27 | 35 | 2.5 | 0.9 | 3.3 | 2.9 | 9.6 | 8.3 | 31.9 | 10.5 | 39.9 | ||
| 10 | 3.1 | 30 | 43 | - | 2.5 | - | - | 3.1 | 11.2 | 8.4 | 36.4 | - | - | ||
| 10 | **5 | 3.8 | 30 | 30 | 35 | 3 | 1.9 | 4.7 | 2.6 | 14.1 | 11.4 | 51 | 17 | 73.7 | |
| **10 | 3.8 | 30 | 43 | 53 | 3 | 1.7 | 4.7 | 2.9 | 14.6 | 9.5 | 60.8 | 13.7 | 75.5 | ||
| 15 | 3.8 | 30 | 58 | - | 3 | - | - | 3.4 | 17 | 7.2 | 57.3 | - | - | ||
| 12 | **5 | 5.5 | 30 (35) | 30 | 43 | 4 | 1.5 | 4.7 | 3.5 | 17.1 | 5.6 | 41 | 35.3 | 107.9 | |
| **10 | 5.5 | 35 | 43 | 58 | 4 | 1.3 | 5.9 | 2.5 | 21.1 | 5.2 | 55.9 | 12.7 | 107.9 | ||
| **15 | 5.5 | 35 | 51 | 78 | 4 | 1.6 | 5.9 | 2.3 | 19.4 | 5.1 | 53.6 | 16.7 | 140.2 | ||
| 20 | 5.5 | 35 | 78 | - | 4 | - | - | 4.1 | 22.5 | 8.7 | 56.1 | - | - | ||
| 16 | **10 | 8 | 35 | 60 | 60 | 5 | 1.7 | 12.8 | 12.1 | 38 | 26.5 | 78 | 29.6 | 157.9 | |
| **15 | 8 | 35 | 60 | 70 | 5 | 1.7 | 12.8 | 9.7 | 39.7 | 14.2 | 79.4 | 10 | 142.2 | ||
| **20 | 8 | 35 | 85 | 90 | 5 | 1.7 | 12.8 | 8.6 | 40.1 | 16.8 | 80.4 | 4.3 | 146.1 | ||
| * 30 | 8 | 35 | 125 | 125 | 5 | - | - | 17 | 38 | 19.8 | 81.2 | 5.2 | 140.7 | ||
| 40 | 8 | 35 | 125 | - | 5 | 5.5 | 41.2 | 7.6 | 84.3 | - | - | ||||
| 50 | 8 | 35 | 155 | 5 | 4.4 | 48.3 | 7.5 | 78.8 | |||||||
| 60 | 8 | 35 | 159 | 5 | 4.1 | 49.6 | 6.4 | 78.1 | |||||||
| 70 | 8 | 35 | 185 | 5 | 3.1 | 55.7 | 4.3 | 95 | |||||||
| 80 | 8 | 35 | 185 | 5 | 2.5 | 51.3 | 3.2 | 103.5 | |||||||
| 20 | * 15 | 10 | 45 | 60 | 80 | 6 | 14.4 | 79.4 | 22.5 | 147.1 | 14.5 | 274.6 | |||
| 20 | 10 | 45 | 72 | 6 | 13.9 | 83.4 | 23 | 157.9 | - | - | |||||
| 30 | 10 | 45 | 96 | 6 | 13.6 | 88.3 | 18.6 | 154 | |||||||
| 40 | 10 | 45 | 120 | 6 | 13.4 | 109.8 | 26.8 | 195.1 | |||||||
[ ! ] ℓ dimensions enclosed with ( ) are applicable to the Extra Heavy Load Type | 24 | 7 | 10 | 45 | 60 | - | 10 | - | - | 27.8 | 65.9 | 40.7 | 127.9 | - | - |
| * 15 | 10 | 45 | 60 | 84 | 10 | 25.5 | 106.9 | 46.9 | 226.5 | 55.1 | 375.2 | ||||
| 20 | 10 | 45 | 75 | - | 10 | 15.3 | 101 | 43.1 | 224.6 | - | - | ||||
| 30 | 10 | 45 | 100 | 10 | 19.1 | 100 | 47.8 | 231.4 | |||||||
| 40 | 10 | 45 | 124 | 10 | 17.1 | 98.1 | 44.1 | 225.5 | |||||||
| 30 | 15 | 14 | 45 | 66 | 14 | 9.3 | 104.4 | 32.4 | 259.9 | ||||||
| 20 | 14 | 45 | 78 | 14 | 55.2 | 156.9 | 72.6 | 356.5 | |||||||
| 30 | 14 | 45 | 100 | 14 | 28.4 | 128.3 | 41.6 | 290.3 | |||||||
| 40 | 14 | 45 | 123 | 14 | 14.7 | 109.2 | 44.4 | 303 | |||||||
■No Thread Locking Compound
| Part Number | d | ℓ | L | B | Ultra Light Load | Light Load | Heavy Load | Extra Heavy Load | |||||||
| TYPE | M (Coarse Thread) | S | Ultra Light / Light / Heavy Load | Extremely Heavy Load | min. N max. Load | min. N max. Load | min. N max. Load | min. N max. Load | |||||||
| (Steep Tip) PJS PJL PJH PJX (Plastic Tip) NPJS NPJL NPJH NPJX | 3 | 1.5 | 1.1 | 10 (15) | 10 | 15 | 0.9 | 0.05 | 0.32 | 0.44 | 1.6 | 0.9 | 4.2 | 2.5 | 5.1 |
| 3 | 1.1 | 15 (20) | 15 | 20 | 0.9 | 0.09 | 0.32 | 0.29 | 1 | 1.1 | 4.9 | 2.5 | 6.8 | ||
| 4 | 2 | 1.6 | 15 (24) | 15 | 24 | 1.3 | 0.23 | 0.65 | 0.9 | 4.1 | 1.9 | 8.7 | 6.3 | 15.3 | |
| 4 | 1.6 | 24 | 24 | 24 | 1.3 | 0.24 | 0.65 | 0.7 | 2.2 | 0.29 | 8.3 | 4.8 | 15 | ||
| (Steep Tip) PJS-N PJL-N PJH-N PJX-N (Plastic Tip) NPJS-N NPJL-N NPJH-N [ ! ] ℓ dimensions enclosed with ( ) are applicable to the Extra Heavy Load Type | 5 | 3 | 2 | 20 (27) | 20 | 27 | 1.5 | 0.74 | 2.95 | 1.5 | 9.8 | 2 | 22.5 | 11 | 30.4 |
| 5 | 2 | 27 (39) | 27 | 39 | 1.5 | 0.72 | 2.95 | 1.6 | 10.4 | 2.5 | 23.4 | 11.6 | 31.5 | ||
| 6 | 3 | 2.5 | 25 (30) | 25 | 30 | 2 | 0.85 | 3.2 | 3.4 | 10.4 | 12.5 | 33.8 | 17.2 | 46.6 | |
| 5 | 2.5 | 30 (36) | 30 | 36 | 2 | 0.85 | 3.2 | 1.9 | 9.7 | 6.2 | 32.6 | 16.8 | 47.4 | ||
| 8 | 3 | 3.1 | 25 (27) | 25 | 27 | 2.5 | 0.9 | 3.3 | 3.5 | 9.4 | 11.7 | 31.2 | 28.1 | 56.9 | |
| 5 | 3.1 | 27 (30) | 27 | 35 | 2.5 | 0.9 | 3.3 | 2.9 | 9.6 | 8.3 | 31.9 | 10.5 | 39.9 | ||
| 10 | 5 | 3.8 | 30 | 30 | 35 | 3 | 1.9 | 4.7 | 2.6 | 14.1 | 11.4 | 51 | 17 | 73.7 | |
| 10 | 3.8 | 30 | 43 | 53 | 3 | 1.7 | 4.7 | 2.9 | 14.6 | 9.5 | 60.8 | 13.7 | 75.5 | ||
| 12 | 5 | 5.5 | 30 (35) | 30 | 43 | 4 | 1.5 | 4.7 | 3.5 | 17.1 | 5.6 | 41 | 35.3 | 107.9 | |
| 10 | 5.5 | 35 | 43 | 58 | 4 | 1.3 | 5.9 | 2.5 | 21.1 | 5.2 | 55.9 | 12.7 | 107.9 | ||
| 15 | 5.5 | 35 | 51 | 78 | 4 | 1.6 | 5.9 | 2.3 | 19.4 | 5.1 | 53.6 | 16.7 | 140.2 | ||
| 16 | 10 | 8 | 35 | 60 | 60 | 5 | 1.7 | 12.8 | 12.1 | 38 | 26.5 | 78 | 29.6 | 157.9 | |
| 15 | 8 | 35 | 60 | 70 | 5 | 1.7 | 12.8 | 9.7 | 39.7 | 14.2 | 79.4 | 10 | 142.2 | ||
| 20 | 8 | 35 | 85 | 90 | 5 | 1.7 | 12.8 | 8.6 | 40.1 | 16.8 | 80.4 | 4.3 | 146.1 | ||
Informações detalhadas
Informações básicas
Cuidado
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Produtos semelhantesVer todos os produtos semelhantes
Não foram encontrados produtos semelhantes para este artigo. O número da peça foi confirmado