Slot Pins for Inspection Jigs / Oval Straight Type

[Features] Square straight/stepped insertion pin for inspection fixtures.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Slot Pins for Inspection Jigs/Oval Straight Type:Related Image

Material	Hardness	Straight	Stepped Straight
		Type	Type
		P 0 -0.02	S 0 -0.02/F 0 -0.05	S_g6/F 0 -0.03
EN 1.1191 Equiv.	-	KJPSR	KJPDR	KJPGDR
EN 1.1191 Equiv.	45HRC~	KJPSHR	KJPDHR	KJPGDHR
EN 1.4301 Equiv.	-	-	KJPDRS	KJPGDRS

Specifications

Part Number (TYPE, D)

KJPDR16

P10.97

W8.57

R0.5

S6.00

F2.0

B10

S	g6
3.00	-0.002 -0.008
3.01~ 6.00	-0.004 -0.012
6.01~10.00	-0.005 -0.014
10.01~18.00	-0.006 -0.017
18.01~28.00	-0.007 -0.020

Part Number				0.01mm Increment				0.1mm Increment	1mm Increment		M
Straight	Stepped Straight		D	P	W	R	S Stepped Type only	F(F≤S/2) Stepped Type only	L	B Stepped Type only
(P 0 -0.02)	(S 0 -0.02/F 0 -0.05)	(Sg6/F 0 -0.03)	D	P	W	R	S Stepped Type only	F(F≤S/2) Stepped Type only	L	B Stepped Type only
(EN 1.1191 Equiv.) KJPSR (EN 1.1191 Equiv. Hardened) KJPSHR	(EN 1.1191 Equiv.) KJPDR (EN 1.1191 Equiv. Hardened) KJPDHR (EN 1.4301 Equiv.) KJPDRS	(EN 1.1191 Equiv.) KJPGDR (EN 1.1191 Equiv. Hardened) KJPGDHR (EN 1.4301 Equiv.) KJPGDRS	8	4.00~ 6.00	P≥W>S (W≥3.01)	0.20≤R<W 2	3.00~ 5.00	0.3~ 2.5	Straight 5~30*1 Stepped Straight 5~20	5~20	M4
			10	4.00~ 6.00			3.00~ 5.00	0.3~ 3.5			M5
			12	4.00~10.00			3.00~ 9.00	0.5~ 4.5			M5
			16	6.00~14.00			4.00~13.00	0.5~ 6.5			M5
			20	10.00~18.00			6.00~17.00	1.0~ 8.5			M5
			25	12.00~22.00			8.00~21.00	2.0~10.5			M5
			10L	8.00~16.00			5.00~15.00	1.0~ 7.5			M5
			12L	10.00~20.00			6.00~19.00	2.0~ 9.5			M5
			16L	16.00~25.00			8.00~24.00	2.0~12.0			M5
			20L	20.00~30.00			10.00~29.00	2.0~14.5			M5

When the S dimension tolerance is g6, D-Shaped section cannot be made very thin. (S≥5.00, F≥1.0; F≥1.5 when D=20)
For Small Head: K≤D-2; for Large Head: K≤Pmax *1 L=21 ~ 30 is available only when the following conditions are all satisfied: Material: EN 1.1191 Equiv., Handle Dia. D≥10, Pin Dia.: P, W≥5

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
KJPSHR8-P[4-6/0.01]-W[3-6/0.01]-R[0.2-2.99/0.01]-L[5-20/1]
KJPSHR10-P[4-6/0.01]-W[3-6/0.01]-R[0.2-2.99/0.01]-L[5-30/1]
KJPSHR10L-P[8-16/0.01]-W[3-16/0.01]-R[0.2-7.99/0.01]-L[5-30/1]
KJPSHR12-P[4-10/0.01]-W[3-10/0.01]-R[0.2-4.99/0.01]-L[5-30/1]
KJPSHR12L-P[10-20/0.01]-W[3-20/0.01]-R[0.2-9.99/0.01]-L[5-30/1]
KJPSHR16-P[6-14/0.01]-W[3-14/0.01]-R[0.2-6.99/0.01]-L[5-30/1]
KJPSHR16L-P[16-25/0.01]-W[3-25/0.01]-R[0.2-12.49/0.01]-L[5-30/1]
KJPSHR20-P[10-18/0.01]-W[3-18/0.01]-R[0.2-8.99/0.01]-L[5-30/1]
KJPSHR20L-P[20-30/0.01]-W[3-30/0.01]-R[0.2-14.99/0.01]-L[5-30/1]
KJPSHR25-P[12-22/0.01]-W[3-22/0.01]-R[0.2-10.99/0.01]-L[5-30/1]
KJPSR8-P[4-6/0.01]-W[3-6/0.01]-R[0.2-2.99/0.01]-L[5-20/1]
KJPSR10-P[4-6/0.01]-W[3.01-6/0.01]-R[0.2-2.99/0.01]-L[5-30/1]
KJPSR10L-P[8-16/0.01]-W[3-16/0.01]-R[0.2-7.99/0.01]-L[5-30/1]
KJPSR12-P[4-10/0.01]-W[3-10/0.01]-R[0.2-4.99/0.01]-L[5-30/1]
KJPSR12L-P[10-20/0.01]-W[3-20/0.01]-R[0.2-9.99/0.01]-L[5-30/1]
KJPSR16-P[6-14/0.01]-W[3-14/0.01]-R[0.2-6.99/0.01]-L[5-30/1]
KJPSR16L-P[16-25/0.01]-W[3-25/0.01]-R[0.2-12.49/0.01]-L[5-30/1]
KJPSR20-P[10-18/0.01]-W[3-18/0.01]-R[0.2-8.99/0.01]-L[5-30/1]
KJPSR20L-P[20-30/0.01]-W[3-30/0.01]-R[0.2-14.99/0.01]-L[5-30/1]
KJPSR25-P[12-22/0.01]-W[3-22/0.01]-R[0.2-10.99/0.01]-L[5-30/1]

Minimum order quantity	Standard Shipping Days ?	RoHS	Shape	Tip Shape	Material	Hardness	Large Head/Small Head	Stepped	Insertion Part S Dimension Tolerance	Outer Dia. D (Ø)	B (mm)	F (mm)	L (mm)	P (mm)	R (mm)	S (mm)	W (mm)
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	Standard	-	8	-	-	5 ～ 20	4 ～ 6	0.2 ～ 2.99	-	3 ～ 6
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	Standard	-	10	-	-	5 ～ 30	4 ～ 6	0.2 ～ 2.99	-	3 ～ 6
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	Standard	-	10	-	-	5 ～ 30	8 ～ 16	0.2 ～ 7.99	-	3 ～ 16
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	Standard	-	12	-	-	5 ～ 30	4 ～ 10	0.2 ～ 4.99	-	3 ～ 10
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	Standard	-	12	-	-	5 ～ 30	10 ～ 20	0.2 ～ 9.99	-	3 ～ 20
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	Standard	-	16	-	-	5 ～ 30	6 ～ 14	0.2 ～ 6.99	-	3 ～ 14
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	Standard	-	16	-	-	5 ～ 30	16 ～ 25	0.2 ～ 12.49	-	3 ～ 25
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	Standard	-	20	-	-	5 ～ 30	10 ～ 18	0.2 ～ 8.99	-	3 ～ 18
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	Standard	-	20	-	-	5 ～ 30	20 ～ 30	0.2 ～ 14.99	-	3 ～ 30
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	Standard	-	25	-	-	5 ～ 30	12 ～ 22	0.2 ～ 10.99	-	3 ～ 22
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	Standard	-	8	-	-	5 ～ 20	4 ～ 6	0.2 ～ 2.99	-	3 ～ 6
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	Standard	-	10	-	-	5 ～ 30	4 ～ 6	0.2 ～ 2.99	-	3.01 ～ 6
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	Standard	-	10	-	-	5 ～ 30	8 ～ 16	0.2 ～ 7.99	-	3 ～ 16
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	Standard	-	12	-	-	5 ～ 30	4 ～ 10	0.2 ～ 4.99	-	3 ～ 10
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	Standard	-	12	-	-	5 ～ 30	10 ～ 20	0.2 ～ 9.99	-	3 ～ 20
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	Standard	-	16	-	-	5 ～ 30	6 ～ 14	0.2 ～ 6.99	-	3 ～ 14
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	Standard	-	16	-	-	5 ～ 30	16 ～ 25	0.2 ～ 12.49	-	3 ～ 25
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	Standard	-	20	-	-	5 ～ 30	10 ～ 18	0.2 ～ 8.99	-	3 ～ 18
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	Standard	-	20	-	-	5 ～ 30	20 ～ 30	0.2 ～ 14.99	-	3 ～ 30
1	7 Days	10	Straight	Square	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	Standard	-	25	-	-	5 ～ 30	12 ～ 22	0.2 ～ 10.99	-	3 ～ 22

Products homepage

Basic information

Type	Slot Pin	Tip Type	Straight	Shape of Stepped Section	Square

Configure

20Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shape
- Straight
- Stepped
Clear
Material
- Steel
  - EN 1.1191 Equiv.
- Stainless Steel
  - EN 1.4301 Equiv.
Clear
Hardness
- 45HRC ~
- No Hardened
Clear
Large Head/Small Head
- Large Head
- Small Head
Clear
Stepped
- Standard
- Stepped
Clear
Insertion Part S Dimension Tolerance
- 0/-0.02
- g6
Clear
Outer Dia. D(Ø)
8

10

12

16

20

25
Clear
B(mm)
Clear
F(mm)
Clear
L(mm)
[5-30/1mm Unit(s)]
Clear
P(mm)
[4-30/0.01mm Unit(s)]
Clear
R(mm)
[0.2-14.99/0.01mm Unit(s)]
Clear
S(mm)
Clear
W(mm)
[3-30/0.01mm Unit(s)]
Clear
Type
- KJPDHR
- KJPDR
- KJPDRS
- KJPGDHR
- KJPGDR
- KJPGDRS
- KJPSHR
- KJPSR
Clear
Tip Shape
- D Cut
- Square
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

7 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

Inspection Jigs / Pin Clips
MISUMI Standard Price : 3.29 € Shipping Days: Same day
Inspection Jigs / Wires for Pins
MISUMI Shipping Days: 9 Days
[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days