• Marcas
  • Empresa
  • Contacto
PT
Type Code Seach | *NOT READY*
#CODE
Sugestões de palavras-chave
Sugestões de número de peça
Discontinued Products

Slot Pins for Inspection Jigs / Stepped and Threaded Type

Slot Pins for Inspection Jigs / Stepped and Threaded Type

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Slot Pins for Inspection Jigs/Stepped and Threaded Type:Related Image
 
 
Material1HardnessType
P   0
-0.02		Pg6
EN 1.1191 Equiv.-KJPMKJPGM
EN 1.1191 Equiv.45HRC~KJPMHKJPGMH
EN 1.4301 Equiv.-KJPMSKJPGMS
2 EN 1.4037 Equiv.45~50HRCKJPMCKJPGMC

Specifications

Part Number (TYPE, D)-P-M-L-B
KJPMH16-P11.20-M6-L15-B10
Part Number0.01mm IncrementM(P≥M)
Selection		1mm Increment
TypeDPLB
(P   0
-0.02)		(Pg6)
(EN 1.1191 Equiv.)
KJPM

(EN 1.1191 Equiv. Hardened)
KJPMH

(EN 1.4301 Equiv.)
KJPMS

(EN 1.4037 Equiv.)
KJPMC		(EN 1.1191 Equiv.)
KJPGM

(EN 1.1191 Equiv. Hardened)
KJPGMH

(EN 1.4301 Equiv.)
KJPGMS

(EN 1.4037 Equiv.)
KJPGMC		8 4.00~ 6.0034      0~35
(L≤Px4)

When L=0,
specify P as 0.		5~25
(M<B≤Mx3)

For M3
(5≤B≤Mx2)
10 5.00~ 8.00 4568   
12 5.00~10.00 456810S10 
16 8.00~14.00 456810S1012
2010.00~18.00  56810S1012
2515.00~23.00  56810S1012
10L10.00~16.00 456810S10 
12L12.00~20.00  56810S1012
16L16.00~25.00   6810S1012(L+B≤50)
20L20.00~30.00   6810S1012
S10 is fine thread (pitch 1.25). KJPND, KJPNDS (previous page) are more economical when L=0.

Alterations

Slot Pins for Inspection Jigs/Stepped and Threaded Type:Related Image

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
KJPGM8-P0-M[3,​4]-L0-B[5-25/1]
KJPGM8-P0-M[3,​4]-L[0-35/1]-B[5-25/1]
KJPGM8-P[4-6/0.01]-M[3,​4]-L0-B[5-25/1]
KJPGM8-P[4-6/0.01]-M[3,​4]-L[0-35/1]-B[5-25/1]
KJPGM10-P0-M[4,​5,​6,​8]-L0-B[5-25/1]
KJPGM10-P0-M[4,​5,​6,​8]-L[0-35/1]-B[5-25/1]
KJPGM10-P[5-8/0.01]-M[4,​5,​6,​8]-L0-B[5-25/1]
KJPGM10-P[5-8/0.01]-M[4,​5,​6,​8]-L[0-35/1]-B[5-25/1]
KJPGM10L-P0-M[4,​5,​6,​8,​10]-L0-B[5-25/1]
KJPGM10L-P0-M[4,​5,​6,​8,​10]-L[0-35/1]-B[5-25/1]
KJPGM10L-P0-MS10-L0-B[5-25/1]
KJPGM10L-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGM10L-P[10-16/0.01]-M[4,​5,​6,​8,​10]-L0-B[5-25/1]
KJPGM10L-P[10-16/0.01]-M[4,​5,​6,​8,​10]-L[0-35/1]-B[5-25/1]
KJPGM10L-P[10-16/0.01]-MS10-L0-B[5-25/1]
KJPGM10L-P[10-16/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGM12-P0-M[4,​5,​6,​8,​10]-L0-B[5-25/1]
KJPGM12-P0-M[4,​5,​6,​8,​10]-L[0-35/1]-B[5-25/1]
KJPGM12-P0-MS10-L0-B[5-25/1]
KJPGM12-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGM12-P[5-10/0.01]-M[4,​5,​6,​8,​10]-L0-B[5-25/1]
KJPGM12-P[5-10/0.01]-M[4,​5,​6,​8,​10]-L[0-35/1]-B[5-25/1]
KJPGM12-P[5-10/0.01]-MS10-L0-B[5-25/1]
KJPGM12-P[5-10/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGM12L-P0-M[5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM12L-P0-M[5,​6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM12L-P0-MS10-L0-B[5-25/1]
KJPGM12L-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGM12L-P[12-20/0.01]-M[5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM12L-P[12-20/0.01]-M[5,​6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM12L-P[12-20/0.01]-MS10-L0-B[5-25/1]
KJPGM12L-P[12-20/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGM16-P0-M[4,​5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM16-P0-M[4,​5,​6,​8,​10,​12]-L[1-35/1]-B[5-25/1]
KJPGM16-P0-MS10-L0-B[5-25/1]
KJPGM16-P0-MS10-L[1-35/1]-B[5-25/1]
KJPGM16-P[8-14/0.01]-M[4,​5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM16-P[8-14/0.01]-M[4,​5,​6,​8,​10,​12]-L[1-35/1]-B[5-25/1]
KJPGM16-P[8-14/0.01]-MS10-L0-B[5-25/1]
KJPGM16-P[8-14/0.01]-MS10-L[1-35/1]-B[5-25/1]
KJPGM16L-P0-M[6,​8,​10,​12]-L0-B[5-25/1]
KJPGM16L-P0-M[6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM16L-P0-MS10-L0-B[5-25/1]
KJPGM16L-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGM16L-P[16-25/0.01]-M[6,​8,​10,​12]-L0-B[5-25/1]
KJPGM16L-P[16-25/0.01]-M[6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM16L-P[16-25/0.01]-MS10-L0-B[5-25/1]
KJPGM16L-P[16-25/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGM20-P0-M[5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM20-P0-M[5,​6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM20-P0-MS10-L0-B[5-25/1]
KJPGM20-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGM20-P[10-18/0.01]-M[5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM20-P[10-18/0.01]-M[5,​6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM20-P[10-18/0.01]-MS10-L0-B[5-25/1]
KJPGM20-P[10-18/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGM20L-P0-M[6,​8,​10,​12]-L0-B[5-25/1]
KJPGM20L-P0-M[6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM20L-P0-MS10-L0-B[5-25/1]
KJPGM20L-P0-MS10-L[0-35/1]-B[5-25/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Hardness Large Head/Small Head Insertion Part P Dimension Tolerance Outer Dia. D
(Ø) 		B
(mm) 		L
(mm) 		P
(mm) 		Thread Dia. Selection (Coarse) [M]
(mm) 		Thread Dia. Selection (Fine) [MS]
(mm)

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg685 ～ 25-03 ～ 4-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg685 ～ 250 ～ 3503 ～ 4-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg685 ～ 25-4 ～ 63 ～ 4-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg685 ～ 250 ～ 354 ～ 63 ～ 4-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6105 ～ 25-04 ～ 8-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6105 ～ 250 ～ 3504 ～ 8-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6105 ～ 25-5 ～ 84 ～ 8-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6105 ～ 250 ～ 355 ～ 84 ～ 8-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 25-04 ～ 10-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 250 ～ 3504 ～ 10-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 25-0-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 250 ～ 350-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 25-10 ～ 164 ～ 10-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 250 ～ 3510 ～ 164 ～ 10-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 25-10 ～ 16-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 250 ～ 3510 ～ 16-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 25-04 ～ 10-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 250 ～ 3504 ～ 10-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 25-0-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 250 ～ 350-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 25-5 ～ 104 ～ 10-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 250 ～ 355 ～ 104 ～ 10-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 25-5 ～ 10-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 250 ～ 355 ～ 10-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 25-05 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 250 ～ 3505 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 25-0-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 250 ～ 350-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 25-12 ～ 205 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 250 ～ 3512 ～ 205 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 25-12 ～ 20-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 250 ～ 3512 ～ 20-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 25-04 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 251 ～ 3504 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 25-0-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 251 ～ 350-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 25-8 ～ 144 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 251 ～ 358 ～ 144 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 25-8 ～ 14-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 251 ～ 358 ～ 14-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 25-06 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 250 ～ 3506 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 25-0-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 250 ～ 350-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 25-16 ～ 256 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 250 ～ 3516 ～ 256 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 25-16 ～ 25-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 250 ～ 3516 ～ 25-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 25-05 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 250 ～ 3505 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 25-0-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 250 ～ 350-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 25-10 ～ 185 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 250 ～ 3510 ～ 185 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 25-10 ～ 18-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 250 ～ 3510 ～ 18-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6205 ～ 25-06 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6205 ～ 250 ～ 3506 ～ 12-

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6205 ～ 25-0-10

-

1 10 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6205 ～ 250 ～ 350-10

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Type Slot Pin Shape Straight Tip Shape Circular Shape
Tip Type Threads Shape of Stepped Section Circular Shape Stepped Single-Row Type

Configure

Clear all

448Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.
      • EN 1.4301 Equiv.

    Clear

  • Hardness

    • 45HRC ~
    • 45 ~ 50HRC
    • No Hardened

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Insertion Part P Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • B(mm)

     [5-25/1mm Unit(s)]

    Clear

  • L(mm)

     [0-35/1mm Unit(s)]

    Clear

  • P(mm)

    • 0

     [4-30/0.01mm Unit(s)]

    Clear

  • Thread Dia. Selection (Coarse) [M](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12

    Clear

  • Thread Dia. Selection (Fine) [MS](mm)

    • 10

    Clear

  • Type

    • KJPGM
    • KJPGMC
    • KJPGMH
    • KJPGMS
    • KJPM
    • KJPMC
    • KJPMH
    • KJPMS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 10 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Método de pagamento

Pagamento por conta

Pré-pagamento

PayPal

Fabrico a pedido

Alterar Vista

Certificados

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

A MISUMI pelo mundo

Redes sociais

Aviso legal

Copyright © MISUMI Corporation Todos os direitos reservados.