Vertical Tapped / Standard Pitch / Thin

Type				Material	Surface Treatment	Accessory
Pitch Selectable		Pitch Configurable
Standard	Thin	Standard	Thin
KMN	KMNU	KML	KMLU	EN 1.0038 Equiv.	Black Oxide	Hex Socket Head Cap Screw
MMN	MMNU	MML	MMLU		Electroless Nickel Plating	Hex Socket Head Cap Screw (Stainless Steel)
AMN	AMNU	-	-	Aluminum Alloy 6000 series	Black Anodize	Hex Socket Head Cap Screw
-	WMNU	-	-		Clear Anodize	Hex Socket Head Cap Screw (Stainless Steel)
SMN	SMNU	-	-	EN 1.4301 Equiv.	-

CB screws are included with the black oxide and black anodized products, and SCB screws are included with the other products.
■Included Screw

D	Included Screw (Thin Type has 1 screw on each side.)
8	M5-12, 1 pc.
10	M5-15, 1 pc.
12	M5-15, 1 pc.
15	M5-20, 2 pcs.
16	M5-20, 2 pcs.
20	M6-25, 2 pcs.
25	M6-30, 2 pcs.
30	M8-35, 2 pcs.
35	M8-40, 2 pcs.
40	M8-45, 2 pcs.
50	M10-55, 2 pcs.

■Pitch Selectable

Part Number				P	A	B	C	C1	E	G	H	S1	M1	S	W	M	d
Type		DH7
Standard KMN MMN AMN SMN (D≤30)	Thin KMNU MMNU AMNU WMNU SMNU (D≤30)	8	+0.015 0	10	29	12	12	-	14	5	8	6	M3	-	2	M5	5.5
		10		11	31	16	16	9	15		9	8	M4	-
		12	+0.018 0	13	34				16		10			-
		15		17	45	22	22	12	20	8	12	12	M5	12
		16						-
		20	+0.021 0	20	52	28	28	16	22	10	15	16	M6	14		M6	6.6
		25		23	58	32	32	19	25		18	20		16
		30		27	66	40	40		29		21	25	M8	20		M8	9
		35	+0.025 0	30	72	45	45	22	32		24	28
KMN	KMNU	40	+0.025 0	35	79	50	50	25	34	10	26	30	M8	20	2	M8	9
		50		45	103	65	65	32	43	15	33	38	M10	32	3	M10	11
For the available sizes, refer to the price list. D=16 is only applicable to Standard Pitch (except Clear Anodize). DH7 tolerance is before the slit machining. For mating, g6, f8 shaft tolerances are recommended. Tightening with a long wrench is recommended.

■Pitch Configurable

Part Number				P Selection						A	B	C	C1	E	G	H	S1	M1	S	W	M	d
Type		DH7
Standard KML MML	Thin KMLU MMLU	10	+0.015 0	20		30				A=P+E+G	16	16	9	15	5	9	8	M4	-	2	M5	5.5
		12	+0.018 0											16		10			-
		15			25	30					22	22	12	20	8	12	12	M5	12
		20	+0.021 0			30	40				28	28	16	22	10	15	16	M6	14		M6	6.6
		25									32	32	19	25		18	20		16
		30					40	50			40	40		29		21	25	M8	20		M8	9
KML KMLU		40	+0.025 0				40	50		A=P+E+G	50	50	25	34	10	26	30	M8	20	2	M8	9
For the available sizes, refer to the price list. DH7 tolerance is before the slit machining. For mating, g6, f8 shaft tolerances are recommended. Tightening with a long wrench is recommended.