Sponge sheets / NBR, CR, EPDM, SI, FPM, PUR / >C1, C8, C15, C25, C30, C35 / adhesive layer

Volume Discount

View the FAQ (5)

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Urethane/Rubber Sponge/Configurable A/B Dimensions:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)

Standard Type		Configurable Type		Material	Hardness	Color
No Adhesive	Adhesive	No Adhesive	Adhesive	Material	Hardness	Color
SGNN	SGNS	SGNNF	SGNSF	Polyurethane Sponge	(Less than Asker C1)	Black
-	-	SGNC	SGNCA	Chloroprene Rubber Sponge	Asker C25	Black
-	-	SGNW	SGNWA	Chloroprene Rubber Sponge	Asker C25	White
-	-	SGNP	SGNPA	EPDM Sponge	Asker C8	Black
-	-	SGNB	SGNBA	NBR Sponge	Asker C30	Black
SISP	SISA	SGNA	SGNAA	Silicon Rubber Sponge	Asker C35* (Asker C22)	Orange
-	-	SGNL	SGNLA	Silicon Rubber Sponge	Asker C15	Orange
-	-	SGNF	SGNFA	Fluororubber Sponge	Asker C35	Black

Temperature limit for seals is 80°C.
SGNW and SGNWA might discolor by aging.
* Values in ( ) are applicable to Standard Type of silicon sponge.

Further specifications can be found under the tab More information.

Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)

■Standard Type

Part Number	-	A	-	B
SGNN10 SISP10	- -	100 250	- -	100 100

■Configurable TypeA≥B

Part Number	-	A	-	B	-	T
SGNCA	-	320	-	220	-	10

General Information - Panels (polyurethane rubber, rubber, foam, felt)

Selection details of panels (polyurethane rubber, rubber, foam, felt)

- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam

- Thickness (mm): 0.5 to 50

- Width (mm): 3 to 500

- Length (mm): 10 to 2000

Description/Basics

Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.

In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.

Additional properties on foam panels and rubber plates can be found in the Properties PDF.

MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.

Application Examples - Panels (polyurethane rubber, rubber, foam, felt)

Application example
(1) Low-friction rubber plate (2) belt conveyor

Application example
(1) Vibration damping plate

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SGNA-[20-500/10]-[20-500/10]-[2,3,5,10]
SGNAA-[20-500/10]-[20-500/10]-[2,3,5,10]
SGNB-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30]
SGNBA-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30]
SGNC-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30]
SGNCA-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30]
SGNF-[20-500/10]-[20-500/10]-[2,3,5,10]
SGNFA-[20-500/10]-[20-500/10]-[2,3,5,10]
SGNL-[20-500/10]-[20-500/10]-[2,3,5,10]
SGNLA-[20-500/10]-[20-500/10]-[2,3,5,10]
SGNN10-[100,200,500]-[100,400,800]
SGNN30-[100,200,500]-[100,400,800]
SGNN50-[100,200,500]-[100,400,800]
SGNNF-[10-500/10]-[10-500/10]-[10,30,50]
SGNP-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30]
SGNPA-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30]
SGNS10-[100,200,500]-[100,400,800]
SGNS30-[100,200,500]-[100,400,800]
SGNS50-[100,200,500]-[100,400,800]
SGNSF-[10-500/10]-[10-500/10]-[10,30,50]
SGNW-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30]
SGNWA-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30]
SISA3-100-100
SISA3-250-100
SISA5-100-100
SISA5-250-100
SISA10-100-100
SISA10-250-100
SISP3-100-100
SISP3-250-100
SISP5-100-100
SISP5-250-100
SISP10-100-100
SISP10-250-100

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Grade, Type	With or w/o Adhesive	Thickness T (mm)	Width A (mm)	Length B (mm)	Hardness (Shore, Asker, Penetration)	Color	Specifications
-	1		6 Days	10	[Silicon (SI)] Silicon Rubber Sponge	No Adhesive	2 ～ 10	20 ～ 500	20 ～ 500	Asker C35	Orange	Configurable Type
-	1		6 Days	10	[Silicon (SI)] Silicon Rubber Sponge	Adhesive	2 ～ 10	20 ～ 500	20 ～ 500	Asker C35	Orange	Configurable Type
-	1		7 Days	10	[Nitrile (NBR)] NBR Nitrile Rubber Sponge	No Adhesive	3 ～ 30	20 ～ 500	20 ～ 500	Asker C30	Black	Configurable Type
-	1		7 Days	10	[Nitrile (NBR)] NBR Nitrile Rubber Sponge	Adhesive	3 ～ 30	20 ～ 500	20 ～ 500	Asker C30	Black	Configurable Type
-	1		6 Days	10	[Chloroprene (CR)] Chloroprene Rubber Sponge	No Adhesive	3 ～ 30	20 ～ 500	20 ～ 500	Asker C25	Black	Configurable Type
-	1		6 Days	10	[Chloroprene (CR)] Chloroprene Rubber Sponge	Adhesive	3 ～ 30	20 ～ 500	20 ～ 500	Asker C25	Black	Configurable Type
-	1		7 Days	10	[Fluorine (FPM)] Fluororubber Sponge	No Adhesive	2 ～ 10	20 ～ 500	20 ～ 500	Asker C35	Black	Configurable Type
-	1		7 Days	10	[Fluorine (FPM)] Fluororubber Sponge	Adhesive	2 ～ 10	20 ～ 500	20 ～ 500	Asker C35	Black	Configurable Type
-	1		7 Days	10	[Silicon (SI)] Silicon Rubber Sponge	No Adhesive	2 ～ 10	20 ～ 500	20 ～ 500	Asker C15	Orange	Configurable Type
-	1		7 Days	10	[Silicon (SI)] Silicon Rubber Sponge	Adhesive	2 ～ 10	20 ～ 500	20 ～ 500	Asker C15	Orange	Configurable Type
-	1		7 Days	10	[Urethane Sponge] Polyurethane Sponge	No Adhesive	10	100 ～ 500	100 ～ 800	Less than Asker C1	Black	Standard Type
-	1		7 Days	10	[Urethane Sponge] Polyurethane Sponge	No Adhesive	30	100 ～ 500	100 ～ 800	Less than Asker C1	Black	Standard Type
-	1		7 Days	10	[Urethane Sponge] Polyurethane Sponge	No Adhesive	50	100 ～ 500	100 ～ 800	Less than Asker C1	Black	Standard Type
-	1		7 Days	10	[Urethane Sponge] Polyurethane Sponge	No Adhesive	10 ～ 50	10 ～ 500	10 ～ 500	Less than Asker C1	Black	Configurable Type
-	1		7 Days	10	[Ethylene (EPDM)] EPDM Synthetic Rubber Sponge	No Adhesive	3 ～ 30	20 ～ 500	20 ～ 500	Asker C8	Black	Configurable Type
-	1		7 Days	10	[Ethylene (EPDM)] EPDM Synthetic Rubber Sponge	Adhesive	3 ～ 30	20 ～ 500	20 ～ 500	Asker C8	Black	Configurable Type
-	1		7 Days	10	[Urethane Sponge] Polyurethane Sponge	Adhesive	10	100 ～ 500	100 ～ 800	Less than Asker C1	Black	Standard Type
-	1		7 Days	10	[Urethane Sponge] Polyurethane Sponge	Adhesive	30	100 ～ 500	100 ～ 800	Less than Asker C1	Black	Standard Type
-	1		7 Days	10	[Urethane Sponge] Polyurethane Sponge	Adhesive	50	100 ～ 500	100 ～ 800	Less than Asker C1	Black	Standard Type
-	1		7 Days	10	[Urethane Sponge] Polyurethane Sponge	Adhesive	10 ～ 50	10 ～ 500	10 ～ 500	Less than Asker C1	Black	Configurable Type
-	1		7 Days	10	[Chloroprene (CR)] Chloroprene Rubber Sponge	No Adhesive	3 ～ 30	20 ～ 500	20 ～ 500	Asker C25	White	Configurable Type
-	1		7 Days	10	[Chloroprene (CR)] Chloroprene Rubber Sponge	Adhesive	3 ～ 30	20 ～ 500	20 ～ 500	Asker C25	White	Configurable Type
14.68 €	1	Available	5 Days	10	[Silicon (SI)] Silicon Rubber Sponge	Adhesive	3	100	100	Asker C22	Orange	Standard Type
36.43 €	1	Available	Same day Stock	10	[Silicon (SI)] Silicon Rubber Sponge	Adhesive	3	250	100	Asker C22	Orange	Standard Type
19.49 €	1	Available	5 Days	10	[Silicon (SI)] Silicon Rubber Sponge	Adhesive	5	100	100	Asker C22	Orange	Standard Type
46.05 €	1	Available	Same day Stock	10	[Silicon (SI)] Silicon Rubber Sponge	Adhesive	5	250	100	Asker C22	Orange	Standard Type
29.36 €	1	Available	5 Days	10	[Silicon (SI)] Silicon Rubber Sponge	Adhesive	10	100	100	Asker C22	Orange	Standard Type
73.13 €	1	Available	5 Days	10	[Silicon (SI)] Silicon Rubber Sponge	Adhesive	10	250	100	Asker C22	Orange	Standard Type
13.04 €	1	Available	5 Days	10	[Silicon (SI)] Silicon Rubber Sponge	No Adhesive	3	100	100	Asker C22	Orange	Standard Type
32.52 €	1	Available	5 Days	10	[Silicon (SI)] Silicon Rubber Sponge	No Adhesive	3	250	100	Asker C22	Orange	Standard Type
17.96 €	1	Available	5 Days	10	[Silicon (SI)] Silicon Rubber Sponge	No Adhesive	5	100	100	Asker C22	Orange	Standard Type
43.65 €	1	Available	5 Days	10	[Silicon (SI)] Silicon Rubber Sponge	No Adhesive	5	250	100	Asker C22	Orange	Standard Type
28.35 €	1	Available	5 Days	10	[Silicon (SI)] Silicon Rubber Sponge	No Adhesive	10	100	100	Asker C22	Orange	Standard Type
68.70 €	1	Available	5 Days	10	[Silicon (SI)] Silicon Rubber Sponge	No Adhesive	10	250	100	Asker C22	Orange	Standard Type

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Open the technical drawing in the new window

Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)

■Accuracy Standards
Polyurethane Sponge

A, B	Tolerance
390 or Less	±2
400~790	±2.5
800	±3

Others

A, B	Tolerance
190 or Less	±1.5
200~390	±2
400 or More	±3

■Standard Type

Part Number		T Tolerance	Selection
Type	T Selection		A	B
SGNN SGNS	10	±1	100 200 500	100 400 800
	30	±2
	50	±3
SISP SISA	3	±0.5	100 250	100
	5	±1
	10

■Configurable Type

Part Number	10mm Increment		T Selection	T Tolerance
	A	B
SGNC SGNW SGNP SGNB SGNCA SGNWA SGNPA SGNBA	20~500	20~500	3 5	±0.5
			8 10 15 20 25	±1
			30	±1.5
SGNA SGNL SGNF SGNAA SGNLA SGNFA	20~500	20~500	2 3 5	±0.5
			10	±1.5
SGNNF SGNSF	10~500	10~500	10	±1
			30	±2
			50	±3

■Characteristics of Sponges

Item	Unit	Polyurethane Sponge	Chloroprene Rubber Sponge	EPDM Sponge	NBR Sponge	Silicon Rubber Sponge			Fluororubber Sponge
Item	Unit	Polyurethane Sponge	Chloroprene Rubber Sponge	EPDM Sponge	NBR Sponge	H_S35	H_S22	H_S15	Fluororubber Sponge
Apparent Density	g/cm³	0.022	0.18	0.13	0.21	0.35~0.37	0.35~0.37	0.3	0.45
Air Bubble	-	Continuous Cell	Independent Cell	Independent Cell	Independent Cell	Independent Cell			Independent Cell
Tensile Strength	MPa {kgf/cm²}	≥0.076 {≥0.77}	0.9 {9}	0.5 {5}	0.8 {8}	1.6~1.8 {16~18}	0.7 {7}	1 {10}	2.7 {27}
Elongation	%	≥120	170	200	200	200~250		250	280
25% Compression Load	MPa {kgf/cm²}	-	5.3×10^-2 {0.54}	3.1×10^-2 {0.32}	6.5×10^-2 {0.66}	- (*1)		- (*3)	- (*1)
Continuous Use Temperature _*2	°C	-10~70	-35~130	-40~130	-10~140	-70~200			-20~230
Abrasion Resistance		◎	○	○	◎	△			◎
Anti-Aging		○	◎	◎	○	◎			◎
Water Resistance		△	○	○	○	○			◎
Chemical Resistance	Oil (Gasoline)	○	○	×	◎	△			◎
	Acid	×~△	○	×~○	△~○	△~○			◎
	Alkali	×	◎	○	○	◎			△~○
	Organic Solvent	×	×~△	×	×~△	×			×~○

For Adhesive Type, the adhesion strength decreases under high temperature (at approx. 80°C or more).
*1 Compression Set <40% During Compression> (100°C/24h) 29%
*2 The temperature of continuous use is the temperature where long-term use does not cause a sharp decline in quality.
*3 Compression Set <40% During Compression> (150°C/24h) 8% (based on JIS K6250)

Products homepage

Basic information

Material	Sponge	Hole Machining	No Drilling Alteration

Configure

34Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Grade, Type
- Nitrile (NBR)
  - NBR Nitrile Rubber Sponge
- Chloroprene (CR)
  - Chloroprene Rubber Sponge
- Ethylene (EPDM)
  - EPDM Synthetic Rubber Sponge
- Silicon (SI)
  - Silicon Rubber Sponge
- Fluorine (FPM)
  - Fluororubber Sponge
- Urethane Sponge
  - Polyurethane Sponge
Clear
With or w/o Adhesive
- Adhesive
- No Adhesive
Clear
Thickness T(mm)
2

3

5

8

10

15

20

25

30

50
Clear
Width A(mm)
100

200

250

500
[10-500/10mm Unit(s)]
Clear
Length B(mm)
100

400

800
[10-500/10mm Unit(s)]
Clear
Hardness (Shore, Asker, Penetration)
Less than Asker C1

Asker C8

Asker C15

Asker C22

Asker C25

Asker C30

Asker C35
Clear
Color
- Black
- Orange
- White
Clear
Specifications
Configurable Type

Standard Type
Clear
Type
- SGNA
- SGNAA
- SGNB
- SGNBA
- SGNC
- SGNCA
- SGNF
- SGNFA
- SGNL
- SGNLA
- SGNN
- SGNNF
- SGNP
- SGNPA
- SGNS
- SGNSF
- SGNW
- SGNWA
- SISA
- SISP
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
How can you attach a rubber plate?: Answer:
A rubber plate can be attached with double-adhesive tape. MISUMI offers rubber plates with configurable through holes or counterbores with adhesive tape.
Question:
Do you have screw-on rubber panels?: Answer:
MISUMI offers rubber plates that can be screwed on via a through hole or counterbore. The rubber plates with counterbores are well suited for applications that need to form a flat surface.
Question:
Is NBR oil-resistant?: Answer:
The NBR rubber is oil-resistant and is often used as a sealing material for rubber or foam. In addition, NBR has good thermal resistance, which in combination with high abrasion resistance is the best suited NBR material for seals.
Question:
Which material reduces vibrations well?: Answer:
Silicone gel vibration dampers reduce vibrations well. This elastic material reduces the transmission of vibrations to the subsequent component and also contributes to the acoustics.
Question:
What is Vulkollan?: Answer:
Vulkollan is a highly abrasion-resistant polyurethane rubber that has high wear resistance. It is one of the high-performance rubbers that has little pressure deformation and can withstand high impact forces. In addition, Vulkollan has a high tear strength. However, over time Vulkollan may change its colour, but without losing its mechanical properties.