PPS Plates (Part Numbers - CAD Download)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog
Technical Information

Type	Material / Grade	Color	Operating Ambient Temperature
NPPS	PPS / Standard	Natural Color	Ambient Temperature ~ 190°C
NPMS	PPS / Abrasion Resistance Grade - Sliding	Blue	Ambient Temperature ~ 220°C

PPS Standard Type generates an oxide film on the surface and the color turns to brown when it is exposed to light and heat (direct sunlight, fluorescent light, mercury lamp and high-temperature atmosphere) for long hours. However, it changes little in mechanical properties and physical properties.

Material: PPSPolyphenylenesulfide

Specifications

■ Standard Type

Part Number	-	A	-	B	-	T
NPPS	-	500	-	400	-	15

■ Pre-drilled Type

Part Number	-	A	-	B	-	T	-	F	-	G	-	Screw Nominal Dia.	-	L
NPPS4H NPMS4H	- -	240 500	- -	130 400	- -	15 20	- -	F150 F300	- -	G40 G200	- -	M8 Z6	-	L12

■ Standard Type

Part Number	A	B	T
Type	1mm Increment		Selectable
NPPS (PPS Plates - Standard Grade)	20~500	20~400	6, 10, 15, 20, 25
NPMS (PPS Plates - Abrasion Resistance, Sliding)	20~500	20~400	10, 20

• T Dimension Tolerance, Rate of Camber and Torsion

T	T Dimension Tolerance		Rates of Camber and Torsion
T	NPPS	NPMS	per 1,000mm
6	0~+3	-	1.5% or Less
10	0~+4	0~+1.5	1.5% or Less
15		-	1.0% or Less
20		0~+2.5
25		-

• Dimension Tolerance of A and B

A, B	A, B Dimension Tolerance
Unit: mm	A, B Dimension Tolerance
~99	±0.5
100~250	±0.75
251~	±1.0

■ Pre-drilled Type

Part Number		A	B	T Selection		F	G	Pre-drilled Hole Nominal Dia.
Part Number		A	B	T Selection		F	G	Through Hole	Counterbore Hole					Threaded Insert
Type	Number of Holes	1mm Increment		NPPS	NPMS	0.5mm Increment		N	Z					M						L
NPPS (PPS Plates - Standard Grade) NPMS (PPS Plates - Abrasion Resistance Grade, Sliding)	2H 4H 6H	20~500	20~400	6	-	6~491.5 ( 2H, 4H ) 6~245.5 ( 6H )	4.5~395.5 ( 2H ) 6~391.5 ( 4-Hole, 6-Hole)	3 4 5 6 8 10	3					3	4	5				(Threaded Insert Length) Select from Table 1
				10	10				3	4	5	6		3	4	5	6	8
				15	-					4	5	6	8	3	4	5	6	8	10
				20	20					4	5	6	8	3	4	5	6	8	10
				25	-					4	5	6	8	3	4	5	6	8	10

Dimension F Specification Range : For 2H and 4H, d(d₁)+2.5≤F≤A-d(d₁)-5; for 6H, d(d₁)+2.5≤F≤(A-d(d₁)-5)/2.
Dimension G Specification Range : For 2H, d(d₁)/2+2.5≤G≤B-d(d₁)/2-2.5; for 4H and 6H, d(d₁)+2.5≤G≤B-d(d₁)-5.
(d for through hole and threaded insert, d₁ for counterbore)
For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
NPMS2H-[20-500/1]-[20-500/1]-[10,20]-F[6-491.5/0.5]-G[4.5-495.5/0.5]-M[3,4,5,6,8,10]
NPMS2H-[20-500/1]-[20-500/1]-[10,20]-F[6-491.5/0.5]-G[4.5-495.5/0.5]-N[3,4,5,6,8,10]
NPMS2H-[20-500/1]-[20-500/1]-[10,20]-F[6-491.5/0.5]-G[4.5-495.5/0.5]-Z[3,4,5,6,8,10]
NPMS4H-[20-500/1]-[20-500/1]-[10,20]-F[6-491.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
NPMS4H-[20-500/1]-[20-500/1]-[10,20]-F[6-491.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
NPMS4H-[20-500/1]-[20-500/1]-[10,20]-F[6-491.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8,10]
NPMS6H-[20-500/1]-[20-500/1]-[10,20]-F[6-245.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
NPMS6H-[20-500/1]-[20-500/1]-[10,20]-F[6-245.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
NPMS6H-[20-500/1]-[20-500/1]-[10,20]-F[6-245.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8,10]
NPMS-[20-500/1]-[20-500/1]-[10,20]
NPPS2H-[20-500/1]-[20-500/1]-[6,10,15,20,25]-F[6-491.5/0.5]-G[4.5-495.5/0.5]-M[3,4,5,6,8,10]
NPPS2H-[20-500/1]-[20-500/1]-[6,10,15,20,25]-F[6-491.5/0.5]-G[4.5-495.5/0.5]-N[3,4,5,6,8,10]
NPPS2H-[20-500/1]-[20-500/1]-[6,10,15,20,25]-F[6-491.5/0.5]-G[4.5-495.5/0.5]-Z[3,4,5,6,8,10]
NPPS4H-[20-500/1]-[20-500/1]-[6,10,15,20,25]-F[6-491.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
NPPS4H-[20-500/1]-[20-500/1]-[6,10,15,20,25]-F[6-491.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
NPPS4H-[20-500/1]-[20-500/1]-[6,10,15,20,25]-F[6-491.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8,10]
NPPS6H-[20-500/1]-[20-500/1]-[6,10,15,20,25]-F[6-245.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
NPPS6H-[20-500/1]-[20-500/1]-[6,10,15,20,25]-F[6-245.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
NPPS6H-[20-500/1]-[20-500/1]-[6,10,15,20,25]-F[6-245.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8,10]
NPPS-[20-500/1]-[20-500/1]-[6,10,15,20,25]

Minimum order quantity	Standard Shipping Days ?	RoHS	Grade	Color	Hole Processing	A (mm)	B (mm)	Counterbored Hole Nominal Dia. [Z]	F (mm)	G (mm)	T (mm)	Threaded Insert Nominal Dia. [M]	Through Hole Nominal Dia. [N]
1	9 Days	10	Abrasion Resistant	Blue	2H	20 ～ 500	20 ～ 500	-	6 ～ 491.5	4.5 ～ 495.5	10 ～ 20	3 ～ 10	-
1	9 Days	10	Abrasion Resistant	Blue	2H	20 ～ 500	20 ～ 500	-	6 ～ 491.5	4.5 ～ 495.5	10 ～ 20	-	3 ～ 10
1	9 Days	10	Abrasion Resistant	Blue	2H	20 ～ 500	20 ～ 500	3 ～ 10	6 ～ 491.5	4.5 ～ 495.5	10 ～ 20	-	-
1	9 Days	10	Abrasion Resistant	Blue	4H	20 ～ 500	20 ～ 500	-	6 ～ 491.5	6 ～ 491.5	10 ～ 20	3 ～ 10	-
1	9 Days	10	Abrasion Resistant	Blue	4H	20 ～ 500	20 ～ 500	-	6 ～ 491.5	6 ～ 491.5	10 ～ 20	-	3 ～ 10
1	9 Days	10	Abrasion Resistant	Blue	4H	20 ～ 500	20 ～ 500	3 ～ 10	6 ～ 491.5	6 ～ 491.5	10 ～ 20	-	-
1	9 Days	10	Abrasion Resistant	Blue	6H	20 ～ 500	20 ～ 500	-	6 ～ 245.5	6 ～ 491.5	10 ～ 20	3 ～ 10	-
1	9 Days	10	Abrasion Resistant	Blue	6H	20 ～ 500	20 ～ 500	-	6 ～ 245.5	6 ～ 491.5	10 ～ 20	-	3 ～ 10
1	9 Days	10	Abrasion Resistant	Blue	6H	20 ～ 500	20 ～ 500	3 ～ 10	6 ～ 245.5	6 ～ 491.5	10 ～ 20	-	-
1	5 Days	10	Abrasion Resistant	Blue	No Drilling Alteration	20 ～ 500	20 ～ 500	-	-	-	10 ～ 20	-	-
1	9 Days	10	Standard	Natural Color	2H	20 ～ 500	20 ～ 500	-	6 ～ 491.5	4.5 ～ 495.5	6 ～ 25	3 ～ 10	-
1	9 Days	10	Standard	Natural Color	2H	20 ～ 500	20 ～ 500	-	6 ～ 491.5	4.5 ～ 495.5	6 ～ 25	-	3 ～ 10
1	9 Days	10	Standard	Natural Color	2H	20 ～ 500	20 ～ 500	3 ～ 10	6 ～ 491.5	4.5 ～ 495.5	6 ～ 25	-	-
1	9 Days	10	Standard	Natural Color	4H	20 ～ 500	20 ～ 500	-	6 ～ 491.5	6 ～ 491.5	6 ～ 25	3 ～ 10	-
1	9 Days	10	Standard	Natural Color	4H	20 ～ 500	20 ～ 500	-	6 ～ 491.5	6 ～ 491.5	6 ～ 25	-	3 ～ 10
1	9 Days	10	Standard	Natural Color	4H	20 ～ 500	20 ～ 500	3 ～ 10	6 ～ 491.5	6 ～ 491.5	6 ～ 25	-	-
1	9 Days	10	Standard	Natural Color	6H	20 ～ 500	20 ～ 500	-	6 ～ 245.5	6 ～ 491.5	6 ～ 25	3 ～ 10	-
1	9 Days	10	Standard	Natural Color	6H	20 ～ 500	20 ～ 500	-	6 ～ 245.5	6 ～ 491.5	6 ～ 25	-	3 ～ 10
1	9 Days	10	Standard	Natural Color	6H	20 ～ 500	20 ～ 500	3 ～ 10	6 ～ 245.5	6 ～ 491.5	6 ～ 25	-	-
1	5 Days	10	Standard	Natural Color	No Drilling Alteration	20 ～ 500	20 ～ 500	-	-	-	6 ～ 25	-	-