- With or w/o Adhesive
- Thickness T(mm)
- 0.5
- Width A(mm)
- 80
- Length B(mm)
- 500
- Hardness (Shore, Asker, Penetration)
- Specifications
- Hole Machining
- Type
- CAD
- 2D
- 3D
Plates / FPM / A60, A70, A80 / through holes, counterbores / adhesive layer (RBLM0.5-80)
Desenho de contorno e tabela de especificações
Back to the Category Panels (polyurethane rubber, rubber, foam, felt)
Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)
Open the technical drawing in the new window
Available dimensions and tolerances can be found under the tab More information.
Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)
| A Selectable Type | A, B Configurable Type | Material | Hardness | Color | ||
| No Adhesive | Adhesive | No Adhesive | Adhesive | |||
| RBFM | RBFMA | RBFMF | RBFMFA | Fluororubber (FPM) | Shore A80 | Black |
| RBLM | RBLMA | RBLMF | RBLMFA | Fluororubber (FPM) | Shore A60 | Black |
| RBFW | RBFWA | RBFWF | RBFWFA | Fluororubber (FPM) | Shore A70 | White |
For Adhesive Strength Data, see Here (ADTR).
For oil-resistant adhesive strength, Here
Temperature limit for seals is 120°C.
■Accuracy Standards
T Tolerance
| T | Tolerance |
| 0.5 | ±0.2 |
| 1~3 | ±0.3 |
| 5 | ±0.4 |
| 10 | ±0.6 |
| 15~30 | -0.5~+2.0 |
A, B Tolerance
| A, B | Tolerance |
| 200 or Less | ±0.5 |
| 201~300 | ±1.0 |
| 301~500 | ±1.5 |
Further specifications can be found under the tab More information.
Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)
| Part Number | - | A |
| RBFM5 | - | 100 |
| Part Number | - | A | - | B | - | F | - | G | - | Screw Nominal Dia. |
| RBFMF10 | - | 110 | - | 65 | ||||||
| RBFMF4H20 | - | 200 | - | 150 | - | F140 | - | G100 | - | Z5 |
Alterations - Panels (polyurethane rubber, rubber, foam, felt)
General Information - Panels (polyurethane rubber, rubber, foam, felt)
_-_Sortiment.jpg)
Selection details of panels (polyurethane rubber, rubber, foam, felt)
- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam
- Thickness (mm): 0.5 to 50
- Width (mm): 3 to 500
- Length (mm): 10 to 2000
Description/Basics
Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.
In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.
Additional properties on foam panels and rubber plates can be found in the Properties PDF.
MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.
Application Examples - Panels (polyurethane rubber, rubber, foam, felt)
Application example
(1) Low-friction rubber plate (2) belt conveyor
Application example
(1) Vibration damping plate
Industrial Applications
Informações detalhadas
Informações básicas
Cuidado
- Similar products are RBLM/RBLMA/RBLMF/RBLMFA listed on P. 2-429 of our catalog. Please check the difference in specifications.
Contorno e especificações
Back to the Category Panels (polyurethane rubber, rubber, foam, felt)
Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)
Open the technical drawing in the new window
Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)
| Part Number | A Selection | ||
| Type | T | ||
| No Adhesive RBFM RBLM RBFW | Adhesive RBFMA RBLMA RBFWA | 0.5 | 300 500 RBFM, RBFMA of T15 or more 300 Only |
| 1 | |||
| 2 | |||
| 3 | |||
| 5 | |||
| 10 | |||
| 15 | |||
| (For exceptions in T dimensions, see below.) | 20 | ||
| 30 | |||
For RBFW and RBFWA, only T=1, 2, 3, 5 are available.
■ Band Type
| Part Number | A Selection | ||
| Type | T | ||
| No Adhesive RBFM RBLM RBFW | Adhesive RBFMA RBLMA RBFWA | 0.5 | 3 5 10 20 30 40 50 80 100 |
| 1 | |||
| 2 | |||
| 3 | |||
| (For exceptions in T dimensions, see below.) | 5 | ||
| 10 | |||
■ A, B Configurable - Standard Type
| Part Number | 1mm Increment | |||
| Type | T | A | B | |
| No Adhesive RBFMF RBLMF RBFWF | Adhesive RBFMFA RBLMFA RBFWFA | 0.5 | 10~500 RBFMF, RBFMFA of T15 or more 10~300 Only | 10~500 RBFMF, RBFMFA of T15 or more 10~300 Only |
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 5 | ||||
| 10 | ||||
| 15 | ||||
| (For exceptions in T dimensions, see below.) | 20 | |||
| 30 | ||||
For RBLMF and RBLMFA, T=15, 20, 30 are not available.
For RBFWF and RBFWFA, only T=1, 2, 3, 5 are available.
■ A, B Configurable - Hole Type
| Part Number | 1mm Increment (A≥B≥T) | 0.5mm Increment | Screw Nominal Dia. Selection | |||||||||||
| Type | Nominal | T | A | B | F | G | N (Through Hole) | Z (Counterbored Hole) | ||||||
| No Adhesive RBFMF RBLMF RBFWF | Adhesive RBFMFA RBLMFA RBFWFA | 1H 2H 3H 4H 6H | 0.5 | 25~500 | 25~500 | 5~495 (1H Type) 9~491 (2H, 4H Types) 9~245 (3H, 6H Types) | 5~495 (1H, 2H, 3H Types) 9~491 (4H, 6H Types) | 3 4 5 6 8 10 | - | |||||
| 1 | - | |||||||||||||
| 2 | - | |||||||||||||
| 3 | - | |||||||||||||
| 5 | - | |||||||||||||
| 10 | 3 | 4 | ||||||||||||
| 15 | 9~291 (1H, 2H, 4H Types) 9~145 (3H, 6H Types) | 5~295 (1H, 2H, 3H Types) 9~291 (4H, 6H Types) | 4 | 5 | 6 | 8 | ||||||||
| (For exceptions in T dimensions, see below.) | 20 | 4 | 5 | 6 | 8 | |||||||||
| 30 | 4 | 5 | 6 | 8 | 10 | |||||||||
Dimension F Specification Range: For 1H: d(d1)/2+2.5≤F≤A-d(d1)/2-2.5, for 2H, 4H: d(d1)+5≤F≤A-d(d1)-5, for 3H, 6H: d(d1)+5≤F≤A/2-d(d1)/2-2.5.
Dimension G Specification Range: For 1H, 2H, 3H: d(d1)/2+2.5≤G≤B-d(d1)/2-2.5, for 4H, 6H: d(d1)+5≤G≤B-d(d1)-5. (d for through holes, d1 for counterbored holes.)
Alterations - Panels (polyurethane rubber, rubber, foam, felt)