- Material
- Steel
- EN 1.7220 Equiv.
- Thread Type
- Thread Dia. M
- 5
- Thread Pitch
- 0.5
- Screw Length L
- 30
- Surface Treatment
- Type
- CAD
- 2D
- 3D
- Dias de envio estimados
- Tudo
- Envio possível no próprio dia
Set screws with stopper / socket head screw / fine thread (ANH5-30)
Desenho de contorno e tabela de especificações
Back to the Category Adjusting Screws/Locating Bolts
Technical Drawing - Set Screws With Stopper
)
Open the technical drawing in the new window
Available dimensions and tolerances can be found under the tab More Information.
Basic Properties (e.g., material, hardness, coating, tolerance) - Set Screws With Stopper
| Adjusting Stopper | Type | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | |
| Material | Surface Treatment | |||||
| Fine | ANH | EN 1.7220 Equiv. | 40~45HRC | Bright Chromate Plating | EN 1.0038 Equiv. | Trivalent Chromate |
| SANH | EN 1.4006 Equiv. | 40~45HRC | - | EN 1.4301 Equiv. | - | |
| Coarse | ANHN | EN 1.7220 Equiv. | 40~45HRC | Bright Chromate Plating | EN 1.0038 Equiv. | Trivalent Chromate |
| ANHNS | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | |
| SANHN | EN 1.4006 Equiv. | 40~45HRC | - | |||
* Hardness: Hardened Tip
Further specifications can be found under the tab More Information.
Composition of a Product Code - Set Screws With Stopper
| Part Number | - | L |
| HANS6 ANH4 | - - | 30 20 |
Informações detalhadas
Informações básicas
Cuidado
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Contorno e especificações
Back to the Category Adjusting Screws/Locating Bolts
Technical Drawing - Set Screws With Stopper
Open the technical drawing in the new window
Available dimensions and tolerances can be found under the tab More Information.
Specification Tables - Set Screws With Stopper
| Part Number | L Selection | MxPitch | T | B | (C) | B1 | H | ℓ | ( ℓ 1) max. | SR | ANH, ANHN | ANHNS | SANH, SANHN | ||||||||||||||||||
| Type | M | Fine | Coarse | Fine | Coarse | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | ||||||||||||||||||||
| 1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||||||||||||||||||
| (Fine) ANH SANH (Coarse) ANHN ANHNS SANHN M3~12 for ANHNS | 3 | 15 | 20 | 25 | 30 | 35 | 40 | - | 3x0.5 | - | 2.4 | 5.5 | 6.4 | 1.5 | 2 | 0.7 | 3 | 3 | |||||||||||||
| 4 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 4x0.5 | 4x0.7 | 4 | 3.2 | 7 | 8.1 | 2.5 | 2.8 | 1.3 | 3 | 4 | |||||||||||
| 5 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 5x0.5 | 5x0.8 | 4 | 8 | 9.2 | 3 | 3.5 | 2 | 3 | 5 | ||||||||||||
| 6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 6x0.75 | 6x1.0 | 5 | 10 | 11.5 | 4 | 4 | 2.5 | 5 | 6 | |||||||||||||
| 8 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 8x0.75 | 8x1.25 | 5 | 6.5 | 13 | 15 | 5 | 5.5 | 3 | 5 | 8 | |||||||||||||
| 10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 10x1.0 | 10x1.5 | 6 | 8 | 17 | 19.6 | 6 | 7 | 4 | 5 | 10 | |||||||||||||
| 12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 12x1.0 | 12x1.75 | 10 | 19 | 21.9 | 8 | 8 | 5 | 10 | 12 | ||||||||||||||
| 16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | 16x1.5 | 16x2.0 | 8 | 13 | 24 | 27.7 | 10 | 10 | 6 | 10 | 16 | - | - | |||||||||||
| 20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 | 20x1.5 | 20x2.5 | 10 | 16 | 30 | 34.6 | 14 | 13 | 7.4 | 10 | 20 | - | - | |||||||||||
For orders larger than indicated quantity, please check with WOS.
General Information - Set Screws With Stopper
Selection details of adjusting screws/locating bolts
- Material: steel, stainless steel
- Coatings: uncoated, burnished, chromated, nickel-plated, galvanised
- Hardness: 40 to 50HRC
- Thread: standard thread, fine thread
- External thread: M3 to M20
- Drive: hexagon socket, external hexagon, spanner flat, knurled head
- Length: 10 to 120 mm
Description/Basics
Adjusting screws for mechanical engineering are intended primarily for positioning the most diverse components. In this case, the adjustment screw sets a predetermined distance of the respective component.
Depending on the application, the MISUMI range offers adjusting screws with control threads and adjusting screws with fine threads. A fine-threading facilitates positioning, since a smaller torque is required for the adjustment. Due to the lower slope of the fine thread, a fine threaded adjusting screw is loosened with less probability than one with standard threads. Another advantage of fine threading is the higher load capacity, which allows higher loads to be accommodated in axial direction. In addition, a locating bolt with a fine thread can generate a higher actuating force due to the low pitch.
The loosening or unintentional adjustment of an adjusting screw can be prevented with a locknut. Depending on the design, the appropriate nut is supplied as an accessory for the adjusting screw. Please see the specifications for more information.
An adjusting screw with knurled head facilitates easy manual adjustment without additional tools. The adjusting screw with knurled head is often used where regular adjustment or component replacement is necessary.
The locating bolt is available with a hardened contact surface. It may be hardened on the thread face or on the head or drive. Tempering ensures greater wear protection of the adjusting screw and increases the service life compared to conventional adjusting screws. The additional compensation process can cause discoloration of the material near the contact surface.
Adjusting screws are also available in the form of hexagon sockets. Without a head as drive, which can be advantageous, especially in inaccessible places.
Adjusting screws are often used in combination with stop pins or height adjusting pins. These bolts are inserted into the component to be moved in order to protect it from wear and tear or damage due to multiple adjustments.
Adjusting screws are often found in workpiece carriers and clamping devices. MISUMI also offers similar adjusting screws or locking bolts with a brush head in the form of stopper bolts.
MISUMI offers suitable threaded stopper blocks, optionally with standard threads and fine threads.
Application Examples - Set Screws With Stopper
Application example - adjusting screw set screw
(1) Adjusting screw, (2) threaded stopper block, (3) screw, (4) base plate (meviy ), (5) washer, (6) levelling element
Application example - adjusting screw with nut
Application example – (1) adjusting screw, (2) nut , (3) threaded stopper block, (4) stop pin , (5) movable object
Industrial Applications
