Manifold Hydraulic / Pneumatic / Outlets 1 Side / 1 Inlet

Click on this image to zoom in.

MISUMI

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Manifold Hydraulic/Pneumatic/Outlets 1 Side/1 Inlet:Related Image

Usage

Type

Material

Surface Treatment

Max. Operating Pressure

Pitch (P) Standard

Pitch (P) Configurable

25x32 Sq.

30x35 Sq.

15 Sq.

20 Sq.

30 Sq.

40 Sq.

25x32 Sq.

30x35 Sq.

20 Sq.

30 Sq.

40 Sq.

Hydraulic

BMZS

BMZF

BMZFP

EN 1.0038 Equiv.

Trivalent Chromate

20.6MPa≈210kgf/cm² or less

BMZSM

BMZFM

BMZSMP

BMZFMP

Electroless Nickel Plating

BMZSR

BMZFR

BMZSRP

BMZFRP

EN 1.4301 Equiv.

Pneumatic

BMZAS

BMZAFC

BMZAF

BMZAFL

BMZAFCP

BMZAFP

BMZAFLP

EN AW-5052 Equiv.

1MPa≈10kgf/cm² or less

BMZASA

BMZAFCA

BMZAFA

BMZAFLA

BMZAFCAP

BMZAFAP

BMZAFLAP

Clear Anodize

Material of 15 Sq. is EN AW-6063 Equiv.

Specifications

Part Number	-	Q	-	G	-	P
BMZF4 BMZFP3 G-BMZFP3	- - -	Q1 Q2 Q2	- - -	G2 G2 G2	- -	P30 P30		(G Thread)

Part Number			Rc (PT), M (Coarse) Selection		Pitch P		Number of Pitches N	Total Number of Q and G Threads	A	B	E	F	X	Y	Mounting Hole Dimension
Type		Number of Circuits	Q	G	Standard	Configurable 1mm Increment									d	D	h
Hydraulic (25x32 Sq.)		1	1 (1/8) 2 (1/4)	1 (1/8) 2 (1/4)	25	20~50 Specify within NxP≤140.	0	2	25	32	20	20	15	6	5.5	9.5	5.5
Pitch Standard BMZS BMZSM BMZSR	Pitch Configurable BMZSMP BMZSRP	2					1	3
		3					2	4
		4					3	5
		5					4	6
Hydraulic (30x35 Sq.)		1	1 (1/8) 2 (1/4) 3 (3/8)	1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2)	35	25~50 Specify within NxP≤120.	0	2	30	35	25	22	15	7	6.6	11	6.5
Pitch Standard BMZF BMZFM BMZFR	Pitch Configurable BMZFP BMZFMP BMZFRP	2					1	3					20
		3					2	4
		4					3	5
		5			30		4	6
Pneumatic (15 Sq.)		1	M3 (M3) M4 (M4) 5 (M5)	5 (M5)	15	-	0	2	15	15	15	10	5	3.5	4.3	-	-
Pitch Standard BMZAS BMZASA		2					1	3
		3					2	4
		4					3	5
		5					4	6
Pneumatic (20 Sq.)		1	1 (1/8) M3 (M3) M4 (M4) 5 (M5)*	1 (1/8) 5 (M5)^*	15	15~50 When 5 (M5) is selected for G, specify within NxP≤70. When 1 (1/8) is selected for G, specify within NxP≤130.	0	2	20	20	20	13	5	4	5.5	-	-
Pitch Standard BMZAFC BMZAFCA	Pitch Configurable BMZAFCP BMZAFCAP	2					1	3
		3					2	4
		4					3	5
		5^*					4	6
Pneumatic (30 Sq.)		1	1 (1/8) 2 (1/4) 5 (M5)*	1 (1/8) 2 (1/4) 5 (M5)^*	25	20~50 When 5 (M5) is selected for G, spwecify within NxP≤70. When 1 (1/8) is selected for G, specify within NxP≤130. When 1(1/8) or 2 (1/4) is selected for G, specify within NxP≤130.	0	2	30	30	20	20	7.5	7	5.5	9.5	5.5
Pitch Standard BMZAF BMZAFA	Pitch Configurable BMZAFP BMZAFAP	2					1	3
		3					2	4
		4					3	5
		5^*					4	6
Pneumatic (40 Sq.)		1	1 (1/8) 2 (1/4) 3 (3/8)	2 (1/4) 3 (3/8) 4 (1/2)	30	25~50 specify within N+P≤130	0	2	40	40	25	25	7	7	6.6	11	6.5
Pitch Standard BMZAFL BMZAFLA	Pitch Configurable BMZAFLP BMZAFLAP	2					1	3
		3					2	4
		4					3	5
		5					4	6

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BMZF) For ordering, see the Ordering Example. For "G-..." 5 (M5) is not available.
For Q and G, specify 1, 2, 3, 4, 5, M3 or M4 indicated before ( ). Single Circuit is not available for Pitch Configurable Type.
When * marked 5 pneumatic outlet port configuration is selected from 20 Sq. / 30 Sq., 5 (M5) is not available for "G-...". Mounting holes will be through holes for Pneumatic 15 and 20 Sq. Types.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
BMZFM1-Q[1,2,3]-G[1,2,3,4]
BMZFM2-Q[1,2,3]-G[1,2,3,4]
BMZFM3-Q[1,2,3]-G[1,2,3,4]
BMZFM4-Q[1,2,3]-G[1,2,3,4]
BMZFM5-Q[1,2,3]-G[1,2,3,4]
BMZFMP2-Q[1,2,3]-G[1,2,3,4]-P[20-50/1]
BMZFMP3-Q[1,2,3]-G[1,2,3,4]-P[20-50/1]
BMZFMP4-Q[1,2,3]-G[1,2,3,4]-P[20-50/1]
BMZFMP5-Q[1,2,3]-G[1,2,3,4]-P[20-50/1]
BMZSM1-Q[1,2]-G[1,2]
BMZSM2-Q[1,2]-G[1,2]
BMZSM3-Q[1,2]-G[1,2]
BMZSM4-Q[1,2]-G[1,2]
BMZSM5-Q[1,2]-G[1,2]
BMZSMP2-Q[1,2]-G[1,2]-P[20-50/1]
BMZSMP3-Q[1,2]-G[1,2]-P[20-50/1]
BMZSMP4-Q[1,2]-G[1,2]-P[20-50/1]
BMZSMP5-Q[1,2]-G[1,2]-P[20-50/1]
G-BMZFM1-Q[1,2,3]-G[1,2,3,4]
G-BMZFM2-Q[1,2,3]-G[1,2,3,4]
G-BMZFM3-Q[1,2,3]-G[1,2,3,4]
G-BMZFM4-Q[1,2,3]-G[1,2,3,4]
G-BMZFM5-Q[1,2,3]-G[1,2,3,4]
G-BMZFMP2-Q[1,2,3]-G[1,2,3,4]-P[20-50/1]
G-BMZFMP3-Q[1,2,3]-G[1,2,3,4]-P[20-50/1]
G-BMZFMP4-Q[1,2,3]-G[1,2,3,4]-P[20-50/1]
G-BMZFMP5-Q[1,2,3]-G[1,2,3,4]-P[20-50/1]
G-BMZSM1-Q[1,2]-G[1,2]
G-BMZSM2-Q[1,2]-G[1,2]
G-BMZSM3-Q[1,2]-G[1,2]
G-BMZSM4-Q[1,2]-G[1,2]
G-BMZSM5-Q[1,2]-G[1,2]
G-BMZSMP2-Q[1,2]-G[1,2]-P[20-50/1]
G-BMZSMP3-Q[1,2]-G[1,2]-P[20-50/1]
G-BMZSMP4-Q[1,2]-G[1,2]-P[20-50/1]
G-BMZSMP5-Q[1,2]-G[1,2]-P[20-50/1]

Minimum order quantity	Standard Shipping Days ?	RoHS	Shape	Material	Surface Treatment	Block Size (mm)	Number of Circuits (Circuits)	Thread Size / Type	Pitch P (mm)	Pitch Standard / Configurable	Application	Thread Dia. Selection [G] 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) 5 (M5)	Thread Dia. Selection [QM] 3 (M3) 4 (M4)	Thread Dia. Selection [Q] 1 (1/8) 2 (1/4) 3 (3/8) 5 (M5)
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	1	Standard Thread {PT, m (Coarse) Thread}	35	Fixed Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	2	Standard Thread {PT, m (Coarse) Thread}	35	Fixed Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	3	Standard Thread {PT, m (Coarse) Thread}	35	Fixed Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	4	Standard Thread {PT, m (Coarse) Thread}	35	Fixed Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	5	Standard Thread {PT, m (Coarse) Thread}	30	Fixed Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	2	Standard Thread {PT, m (Coarse) Thread}	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	3	Standard Thread {PT, m (Coarse) Thread}	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	4	Standard Thread {PT, m (Coarse) Thread}	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	5	Standard Thread {PT, m (Coarse) Thread}	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	1	Standard Thread {PT, m (Coarse) Thread}	25	Fixed Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	2	Standard Thread {PT, m (Coarse) Thread}	25	Fixed Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	3	Standard Thread {PT, m (Coarse) Thread}	25	Fixed Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	4	Standard Thread {PT, m (Coarse) Thread}	25	Fixed Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	5	Standard Thread {PT, m (Coarse) Thread}	25	Fixed Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	2	Standard Thread {PT, m (Coarse) Thread}	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	3	Standard Thread {PT, m (Coarse) Thread}	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	4	Standard Thread {PT, m (Coarse) Thread}	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	5	Standard Thread {PT, m (Coarse) Thread}	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	1	G (PF) Thread	35	Fixed Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	2	G (PF) Thread	35	Fixed Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	3	G (PF) Thread	35	Fixed Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	4	G (PF) Thread	35	Fixed Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	5	G (PF) Thread	30	Fixed Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	2	G (PF) Thread	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	3	G (PF) Thread	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	4	G (PF) Thread	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	30 x 35	5	G (PF) Thread	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 4	-	1 ～ 3
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	1	G (PF) Thread	25	Fixed Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	2	G (PF) Thread	25	Fixed Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	3	G (PF) Thread	25	Fixed Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	4	G (PF) Thread	25	Fixed Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	5	G (PF) Thread	25	Fixed Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	2	G (PF) Thread	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	3	G (PF) Thread	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	4	G (PF) Thread	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2
1	7 Days	10	Blind Lateral Hole, Upper Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	25 x 32	5	G (PF) Thread	20 ～ 50	Configurable Type	For hydraulic / Water Pressure	1 ～ 2	-	1 ～ 2

Products homepage

Configure

36Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shape
- Blind Lateral Hole, Upper Hole
- Blind Lateral Hole, Two-Circuit (L-Shaped Hole)
Clear
Material
- EN 1.0038 Equiv.
- EN 1.4301 Equiv.
- EN AW-5052 Equiv.
Clear
Block Size(mm)
- 15 x 15
- 20 x 20
- 25 x 32
- 30 x 30
- 30 x 35
- 40 x 40
Clear
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, m (Coarse) Thread}
Clear
Pitch P(mm)
15

25

30

35
[20-50/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Application
- For Water Hydraulic
- For hydraulic / Water Pressure
- Pneumatic
Clear
Thread Dia. Selection [G] 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) 5 (M5)
1

2

3

4

5
Clear
Thread Dia. Selection [QM] 3 (M3) 4 (M4)
3

4
Clear
Thread Dia. Selection [Q] 1 (1/8) 2 (1/4) 3 (3/8) 5 (M5)
1

2

3

5
Clear
Type
- BMZAF
- BMZAFA
- BMZAFAP
- BMZAFC
- BMZAFCA
- BMZAFCAP
- BMZAFCP
- BMZAFL
- BMZAFLA
- BMZAFLAP
- BMZAFLP
- BMZAFP
- BMZAS
- BMZASA
- BMZF
- BMZFM
- BMZFMP
- BMZFP
- BMZFR
- BMZFRP
- BMZS
- BMZSM
- BMZSMP
- BMZSR
- BMZSRP
- G-BMZAF
- G-BMZAFA
- G-BMZAFAP
- G-BMZAFC
- G-BMZAFCA
- G-BMZAFCAP
- G-BMZAFCP
- G-BMZAFL
- G-BMZAFLA
- G-BMZAFLAP
- G-BMZAFLP
- G-BMZAFP
- G-BMZAS
- G-BMZASA
- G-BMZF
- G-BMZFM
- G-BMZFMP
- G-BMZFP
- G-BMZFR
- G-BMZFRP
- G-BMZS
- G-BMZSM
- G-BMZSMP
- G-BMZSR
- G-BMZSRP
Clear
Surface Treatment
- Not Provided
- Trivalent Chromate
- Electroless Nickel Plating
- Clear Anodized Aluminum
Clear
Filter by CAD data type
- 2D
- 3D
Clear