Condições de filtragem
- Thread Nominal D(φ)
- 22
- Nut O.D. D(φ)
- 36
- Nut Length L1 (or L)(mm)
- 50
- Type
- CAD
- 2D
- 3D
- Dias de envio estimados
- Tudo
- Dentro de 7 dias úteis
Nuts for Lead Screws / Round Flanged / Slotted Holes / Right-Hand Thread (MTSQR22)
Desenho de contorno e tabela de especificações
Dimensional Drawing
Round Flanged, Slotted Holes
MTSQR (Right-Hand Thread)
Material: EN CC766S Equiv.
MTSQR (Right-Hand Thread)
Material: EN CC766S Equiv.
h8 Tolerance (D)
Compliant with JIS B 0401
| Over | or less | Tolerance |
| 3 | 6 | 0 －0.018 |
| 6 | 10 | 0 －0.022 |
| 10 | 18 | 0 －0.027 |
| 18 | 30 | 0 －0.033 |
| 30 | 50 | 0 －0.039 |
| 50 | 80 | 0 －0.046 |
Dimensional Tolerances
Without Command
Compliant with JIS B 0405
Class m (intermediate).
Without Command
| Over | or less | Tolerance |
| 0.5 | 3 | ±0.1 |
| 3 | 6 | ±0.1 |
| 6 | 30 | ±0.2 |
| 30 | 120 | ±0.3 |
Class m (intermediate).
Specification Table
| Part Number |
| MTSQR32 |
| Part Number | Pitch P | D | L1 | D1 | T | P.C.D. | K | Allowable Dynamic Thrust (kN) | Mass (g) | |
| Slotted Holes MTSQR | 14 | 3 | 22 | 30 | 44 | 5 | 31 | 5.4 | 4.90 | 98 |
| 16 | 3 | 28 | 35 | 51 | 6 | 38 | 6.6 | 6.67 | 178 | |
| 20 | 4 | 32 | 40 | 56 | 6 | 42 | 6.6 | 9.81 | 236 | |
| 22 | 5 | 36 | 50 | 61 | 7 | 47 | 6.6 | 12.36 | 378 | |
| 25 | 5 | 36 | 50 | 61 | 7 | 47 | 6.6 | 14.22 | 318 | |
| 28 | 5 | 44 | 56 | 76 | 8 | 58 | 9 | 17.95 | 570 | |
| 32 | 6 | 44 | 56 | 76 | 8 | 58 | 9 | 21.08 | 520 | |
between the screw and the body.
Lead Screw Accuracy
The Tr standard has the same standard
dimensions as the old JIS TM standard
(abolished).
Dimensional tolerances are regulated for
Tr standard.
| Item | Content |
| Standard Chevron | Tr Standard (Old TM Standard) |
| Tolerance and Allowable Dimension | JIS B 0217-1,2 |
| Screw Accuracy (Threaded) | 7e |
| Nut Accuracy (Tapped) | 7H |
| Single Pitch Error | ±0.02 |
| Accumulated Pitch Error | ±0.15/300mm |
dimensions as the old JIS TM standard
(abolished).
Dimensional tolerances are regulated for
Tr standard.
Standard Chevron Dimensions
| H=1.866P | H1=0.5P | d2=d-0.5P | |
| d1=d-P | D=d | D2=d2 | D1=d1 |
| Male Thread | d:O.D. | d1:谷径 | d2:Effective Dia. |
| Female Thread | D:Root Dia. | D1:I.D. | D2:Effective Dia. |
| P:Pitch | H1:Engage Height | ||
[ ! ] This product is a single thread screw and therefore the pitch P = lead.
[ ! ] Initial greasing is recommended for effective use. Recommended Grease: Lithium soap-based grease No. 2
(Please wipe off the antirust oil before applying.)
[ ! ] Initial greasing is recommended for effective use. Recommended Grease: Lithium soap-based grease No. 2
(Please wipe off the antirust oil before applying.)
Related Components
| 30-degree Lead Screw | 30-degree Trapezoidal Screw for Nut Bracket | 30-degree Trapezoidal Screw for Support Units Square Type | 30-degree Trapezoidal Screw for Support Units Round Type |
 |  |   |   |
Informações detalhadas
Informações básicas
[Features] The slotted hole type allows fine adjustment of a position when assembling a jig.