Lead Screws / Multi-Pitch / Both Ends Stepped DIN103

Type				Material	Surface Treatment
Right-Hand Thread	Right-Hand Thread with Keyway	Fine Pitch Right-Hand Thread	Left-Hand Thread
MTSRW	MTSRV	MTXRW	MTSLW	EN 1.1191 Equiv.	-
MTSBRW	MTSBRV	MTXBRW	MTSBLW		Black Oxide
RMTSRW	RMTSRV	-	RMTSLW		LTBC Plating
MTSTRW	-	-	MTSTLW	EN 1.4305 Equiv.	-

• Single Pitch Error ••• ±0.02mm • Accumulated Pitch Error ••• ±0.15/300mm

Part Number	-	L	-	F	-	V	-	S	-	Q	-	C	-	J
MTSRW16	-	282	-	F16	-	V10	-	S14	-	Q10
MTSRV16	-	282	-	F16	-	V10	-	S14	-	Q10	-	C10	-	J2

■Right-Hand Thread / Left-Hand Thread

Part Number		1mm Increment		V / Q Selection						D	Pitch P
Type	D	L	F, S
(Right-Hand Thread) MTSRW MTSBRW RMTSRW D≤32,L≤1000 MTSTRW (Stainless Steel) (Left-Hand Thread) MTSLW MTSBLW RMTSLW D≤32,L≤1000 MTSTLW (Stainless Steel)	*8	50~500	2≤F≤Vx7 2≤S≤Qx7 When V and Q are 6 ~ 9, 2≤F≤Vx5 2≤S≤Qx5	6						8	1.5
	10	80~1000		6	7					10	2
	12			6	7	8	9			12	2
	14			8	9	10				14	3
	16	100~1200		9	10	12				16	3
	18	150~1200		9	10	12				18	4
	20			10	12	14	15			20	4
	22			10	12	14	15			22	5
	25			12	14	15	16	17		25	5
	28			14	15	16	17	20		28	5
	32	200~1200		14	15	16	17	20	25	32	6
	36			17	20	25				36	6
	40			20	25	30				40	6
(D8 is applicable to MTSRW, MTSBRW and RMTSRW only)	50			25	30	35	40			50	8

When combined with position indicators, the standard Q diameters are 8 ~ 20. Here, 812
D dimension 22, 36, 40 and 50 are not applicable to Stainless Steel. D dimension 25, 28 and 32 are applicable to Right-Hand Thread only.

■Right-Hand Thread with Keyway

Part Number		1mm Increment		V / Q Selection						1mm Increment		D	Pitch P
Type	D	L	F, S							C	J
MTSRV MTSBRV RMTSRV D≤32,L≤1000	12	80~1000	2≤F≤Vx7 2≤S≤Qx7 When Q,V≤9, F, S are 5x or less of Q, V.	7	8	9				C≤60 S-C-J≥2	J≥2 or J=0 When J=0, keyway R will be eliminated on the shaft end side.	12	2
	14			8	9	10						14	3
	16	100~1200		9	10	12						16	3
	18	150~1200		9	10	12						18	4
	20			10	12	14	15					20	4
	22			10	12	14	15					22	5
	25			12	14	15	16	17				25	5
	28			14	15	16	17	20				28	5
	32	200~1200		14	15	16	17	20	25			32	6
	36			17	20	25						36	6
	40			20	25	30						40	6
	50			25	30	35	40					50	8

When combined with position indicators, the standard Q diameters are 8 ~ 20. Here, 812

■Fine Pitch Right-Hand Thread Fine Pitch Right-Hand Thread has a smaller pitch than the conventional standard products.

Part Number		1mm Increment		V / Q Selection	D	Pitch P
Type	D	L	F, S
MTXRW MTXBRW	16	100~1000	2≤F≤Vx7 2≤S≤Qx7  When Q, V≤9, F, S are 5x or less of Q, V.	9 10 12	16	2
	20	150~1000		10 12 14 15	20	2

Nuts for Fine Pitch Right-Hand Thread Here