Página Inicial MISUMI
Automation Components
Locating, Positioning, Jigs & Fixtures
Locating Pins, Bushings
Locating Pins / Positioning Pins / Centring Pins
Locating Pin - Resin, Large Head, Tip Shape Selectable, Threaded

Condições de filtragem

RoHS Requirements
- RoHS Requirements fulfilled
Features, Areas of Application
- Not Applicable
Material
Resin
MC Nylon
PEEK (Natural Ivory)
Polyacetal
[D] Diameter (Mounting Side)(mm)
- 3
- 4
- 5
- 6
- 8
- 10
[P] Diameter (Head)(mm)
[3.5-15/0.01mm unidades]
[L] Length (Pin)(mm)
[2-20/1mm unidades]
[B] Length (Head)(mm)
[2-20/0.1mm unidades]
Type
CAD
- 2D
- 3D
Dias de envio estimados
- Tudo
- Dentro de 7 dias úteis

MISUMI

Locating Pin - Resin, Large Head, Tip Shape Selectable, Threaded

Número da peça:

Indefinido. 218 candidatos encontrados.

Desenho de contorno e tabela de especificações
Lista de números de peça
Informações detalhadas

Desenho de contorno e tabela de especificações

● Threaded

(Round)

(Diamond)

Locating Pin - Resin, Large Head, Tip Shape Selectable, Threaded: Related Image

[ ! ] The outer diameter tolerance is the result of measurement at room temperature.
[ ! ] Relief dimensions are reference values.

Tip Shape Selectable
Tapered		Sphere
Flat

Type				Fixed Part	Head Shape	Material	Operating Ambient Temperature
P Configurable		P, L, B Configurable
Round	Diamond	Round	Diamond
JP	JPD	FJP	FJPD	W (Threaded)	A (Tapered) FA (Flat) Q (Sphere)	Polyacetal (Black)	−45 to 95°C
MJP	MJPD	MFP	MFPD			MC Nylon (Blue)	−40 to 120°C
JKP	JKPD	FKP	FKPD			PEEK (Natural Ivory)	−50 to 250°C

Specification Table

Part Number

—

Type

Fixed Part

Head Selection

—

10.00

MJP

—

P8.00

—

B4.0

■P Configurable

Part Number						P Ordering Code 0.01 mm Increments	L	B	C Tip Shape Flat	*C D Dimension Part	m	M (Coarse)	(W)
Type		Fixed Part	Head Shape	D	D Dimension Tolerance g6	P Ordering Code 0.01 mm Increments	L	B	C Tip Shape Flat	*C D Dimension Part	m	M (Coarse)	(W)
(Round) JP MJP JKP	(Diamond) JPD MJPD JKPD	W (Threaded)	A (Tapered) FA (Flat) Q (Sphere)	3	-0.002 -0.008	3.50 (4.00) to 6.00	2	5	0.5	0.5	2	M3	1.5
				4	-0.004 -0.012	4.50 to 7.00	2	6	1	0.5	3	M4	1.8
				5	-0.004 -0.012	5.50 to 8.00	3	6	1	0.8	3	M5	2.2
				6	-0.004 -0.012	6.50 to 10.00	3	8	1	1	3	M6	3
				8	-0.005 -0.014	9.00 to 13.00	5	8	1.5	1.5	4	M8	3.5
				10	-0.005 -0.014	11.00 to 15.00	5	10	2	1.5	4	M10	4

[ ! ] P dimension in ( ) is applicable to Diamond Shape

■P, L, B Configurable

Part Number						P Ordering Code 0.01 mm Increments	L 1 mm Increments	B 0.1 mm Increments	C Tip Shape Flat	*C D Dimension Part	m	M (Coarse)	(W)
Type		Fixed Part	Head Shape	D	D Dimension Tolerance g6	P Ordering Code 0.01 mm Increments	L 1 mm Increments	B 0.1 mm Increments	C Tip Shape Flat	*C D Dimension Part	m	M (Coarse)	(W)
(Round) FJP MFP FKP	(Diamond) FJPD MFPD FKPD	W (Threaded)	A (Tapered) FA (Flat) Q (Sphere)	3	-0.002 -0.008	3.50 (4.00) to 6.00	2 to 6	2.0 to 10.0	0.5	0.5	2	M3	1.5
				4	-0.004 -0.012	4.50 to 7.00	2 to 8	2.0 to 10.0	1	0.5	3	M4	1.8
				5	-0.004 -0.012	5.50 to 8.00	3 to 10	2.0 to 10.0	1	0.8	3	M5	2.2
				6	-0.004 -0.012	6.50 to 10.00	3 to 12	2.0 to 12.0	1	1	3	M6	3
				8	-0.005 -0.014	9.00 to 13.00	5 to 16	2.0 (3.0) to 15.0	1.5	1.5	4	M8	3.5
				10	-0.005 -0.014	11.00 to 15.00	5 to 20	3.0 (4.0) to 20.0 (15.0)	2	1.5	4	M10	4

[ ! ] P,B dimension in ( ) is applicable to Flat and Diamond Shape

Lista de números de peça

Número de itens

Seguinte

Número da peça

FJPDWA3-P[4-6/0.01]-L[2-6/1]-B[2-10/0.1]

FJPDWA4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]

FJPDWA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]

FJPDWA6-P[6.5-10/0.01]-L[3-12/1]-B[2-12/0.1]

FJPDWA8-P[9-13/0.01]-L[5-16/1]-B[2-15/0.1]

FJPDWA10-P[11-15/0.01]-L[5-20/1]-B[3-15/0.1]

FJPDWFA3-P[4-6/0.01]-L[2-6/1]-B[2-10/0.1]

FJPDWFA4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]

FJPDWFA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]

FJPDWFA6-P[6.5-10/0.01]-L[3-12/1]-B[2-12/0.1]

FJPDWFA8-P[9-13/0.01]-L[5-16/1]-B[3-15/0.1]

FJPDWFA10-P[11-15/0.01]-L[5-20/1]-B[4-15/0.1]

FJPDWQ3-P[4-6/0.01]-L[2-6/1]-B[2-10/0.1]

FJPDWQ4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]

FJPDWQ5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]

FJPDWQ6-P[6.5-10/0.01]-L[3-12/1]-B[2-12/0.1]

FJPDWQ8-P[9-13/0.01]-L[5-16/1]-B[2-15/0.1]

FJPDWQ10-P[11-15/0.01]-L[5-20/1]-B[3-15/0.1]

FJPWA3-P[3.5-6/0.01]-L[2-6/1]-B[2-10/0.1]

FJPWA4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]

FJPWA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]

FJPWA6-P[6.5-10/0.01]-L[3-12/1]-B[2-12/0.1]

FJPWA8-P[9-13/0.01]-L[5-16/1]-B[2-15/0.1]

FJPWA10-P[11-15/0.01]-L[5-20/1]-B[3-20/0.1]

FJPWFA3-P[3.5-6/0.01]-L[2-6/1]-B[2-10/0.1]

FJPWFA4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]

FJPWFA6-P[6.5-10/0.01]-L[3-12/1]-B[2-12/0.1]

FJPWFA8-P[9-13/0.01]-L[5-16/1]-B[3-15/0.1]

FJPWFA10-P[11-15/0.01]-L[5-20/1]-B[4-20/0.1]

FJPWQ3-P[3.5-6/0.01]-L[2-6/1]-B[2-10/0.1]

FJPWQ4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]

FJPWQ5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]

FJPWQ6-P[6.5-10/0.01]-L[3-12/1]-B[2-12/0.1]

FJPWQ8-P[9-13/0.01]-L[5-16/1]-B[2-15/0.1]

FJPWQ10-P[11-15/0.01]-L[5-20/1]-B[3-20/0.1]

FKPDWA3-P[4-6/0.01]-L[2-6/1]-B[2-10/0.1]

FKPDWA4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]

FKPDWA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]

FKPDWA6-P[6.5-10/0.01]-L[3-12/1]-B[2-12/0.1]

FKPDWA8-P[9-13/0.01]-L[5-16/1]-B[2-15/0.1]

FKPDWA10-P[11-15/0.01]-L[5-20/1]-B[3-15/0.1]

FKPDWFA3-P[4-6/0.01]-L[2-6/1]-B[2-10/0.1]

FKPDWFA4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]

FKPDWFA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]

FKPDWFA6-P[6.5-10/0.01]-L[3-12/1]-B[2-12/0.1]

FKPDWFA8-P[9-13/0.01]-L[5-16/1]-B[3-15/0.1]

FKPDWFA10-P[11-15/0.01]-L[5-20/1]-B[4-15/0.1]

FKPDWQ3-P[4-6/0.01]-L[2-6/1]-B[2-10/0.1]

FKPDWQ4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]

FKPDWQ5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]

FKPDWQ6-P[6.5-10/0.01]-L[3-12/1]-B[2-12/0.1]

FKPDWQ8-P[9-13/0.01]-L[5-16/1]-B[2-15/0.1]

FKPDWQ10-P[11-15/0.01]-L[5-20/1]-B[3-15/0.1]

FKPWA3-P[3.5-6/0.01]-L[2-6/1]-B[2-10/0.1]

FKPWA4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]

FKPWA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]

FKPWA6-P[6.5-10/0.01]-L[3-12/1]-B[2-12/0.1]

FKPWA8-P[9-13/0.01]-L[5-16/1]-B[2-15/0.1]

FKPWA10-P[11-15/0.01]-L[5-20/1]-B[3-20/0.1]

FKPWFA3-P[3.5-6/0.01]-L[2-6/1]-B[2-10/0.1]

RoHS Requirements

Features, Areas of Application

Shape (Head, Outline View)

Shape (Head, Tip View)

Material

[D] Diameter (Mounting Side)

(mm)

[P] Diameter (Head)

(mm)

[L] Length (Pin)

(mm)

[B] Length (Head)

(mm)

Quantidade mínima de encomenda

RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] Polyacetal	3	4 ～ 6	2 ～ 6	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] Polyacetal	4	4.5 ～ 7	2 ～ 8	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] Polyacetal	5	5.5 ～ 8	3 ～ 10	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] Polyacetal	6	6.5 ～ 10	3 ～ 12	2 ～ 12	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] Polyacetal	8	9 ～ 13	5 ～ 16	2 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] Polyacetal	10	11 ～ 15	5 ～ 20	3 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] Polyacetal	3	4 ～ 6	2 ～ 6	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] Polyacetal	4	4.5 ～ 7	2 ～ 8	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] Polyacetal	5	5.5 ～ 8	3 ～ 10	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] Polyacetal	6	6.5 ～ 10	3 ～ 12	2 ～ 12	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] Polyacetal	8	9 ～ 13	5 ～ 16	3 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] Polyacetal	10	11 ～ 15	5 ～ 20	4 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] Polyacetal	3	4 ～ 6	2 ～ 6	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] Polyacetal	4	4.5 ～ 7	2 ～ 8	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] Polyacetal	5	5.5 ～ 8	3 ～ 10	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] Polyacetal	6	6.5 ～ 10	3 ～ 12	2 ～ 12	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] Polyacetal	8	9 ～ 13	5 ～ 16	2 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] Polyacetal	10	11 ～ 15	5 ～ 20	3 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] Polyacetal	3	3.5 ～ 6	2 ～ 6	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] Polyacetal	4	4.5 ～ 7	2 ～ 8	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] Polyacetal	5	5.5 ～ 8	3 ～ 10	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] Polyacetal	6	6.5 ～ 10	3 ～ 12	2 ～ 12	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] Polyacetal	8	9 ～ 13	5 ～ 16	2 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] Polyacetal	10	11 ～ 15	5 ～ 20	3 ～ 20	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Flat	[Resin] Polyacetal	3	3.5 ～ 6	2 ～ 6	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Flat	[Resin] Polyacetal	4	4.5 ～ 7	2 ～ 8	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Flat	[Resin] Polyacetal	6	6.5 ～ 10	3 ～ 12	2 ～ 12	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Flat	[Resin] Polyacetal	8	9 ～ 13	5 ～ 16	3 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Flat	[Resin] Polyacetal	10	11 ～ 15	5 ～ 20	4 ～ 20	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Spherical	[Resin] Polyacetal	3	3.5 ～ 6	2 ～ 6	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Spherical	[Resin] Polyacetal	4	4.5 ～ 7	2 ～ 8	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Spherical	[Resin] Polyacetal	5	5.5 ～ 8	3 ～ 10	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Spherical	[Resin] Polyacetal	6	6.5 ～ 10	3 ～ 12	2 ～ 12	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Spherical	[Resin] Polyacetal	8	9 ～ 13	5 ～ 16	2 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Spherical	[Resin] Polyacetal	10	11 ～ 15	5 ～ 20	3 ～ 20	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] PEEK (Natural Ivory)	3	4 ～ 6	2 ～ 6	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] PEEK (Natural Ivory)	4	4.5 ～ 7	2 ～ 8	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] PEEK (Natural Ivory)	5	5.5 ～ 8	3 ～ 10	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] PEEK (Natural Ivory)	6	6.5 ～ 10	3 ～ 12	2 ～ 12	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] PEEK (Natural Ivory)	8	9 ～ 13	5 ～ 16	2 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Tapered	[Resin] PEEK (Natural Ivory)	10	11 ～ 15	5 ～ 20	3 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] PEEK (Natural Ivory)	3	4 ～ 6	2 ～ 6	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] PEEK (Natural Ivory)	4	4.5 ～ 7	2 ～ 8	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] PEEK (Natural Ivory)	5	5.5 ～ 8	3 ～ 10	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] PEEK (Natural Ivory)	6	6.5 ～ 10	3 ～ 12	2 ～ 12	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] PEEK (Natural Ivory)	8	9 ～ 13	5 ～ 16	3 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Flat	[Resin] PEEK (Natural Ivory)	10	11 ～ 15	5 ～ 20	4 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] PEEK (Natural Ivory)	3	4 ～ 6	2 ～ 6	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] PEEK (Natural Ivory)	4	4.5 ～ 7	2 ～ 8	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] PEEK (Natural Ivory)	5	5.5 ～ 8	3 ～ 10	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] PEEK (Natural Ivory)	6	6.5 ～ 10	3 ～ 12	2 ～ 12	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] PEEK (Natural Ivory)	8	9 ～ 13	5 ～ 16	2 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Diamond	Spherical	[Resin] PEEK (Natural Ivory)	10	11 ～ 15	5 ～ 20	3 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] PEEK (Natural Ivory)	3	3.5 ～ 6	2 ～ 6	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] PEEK (Natural Ivory)	4	4.5 ～ 7	2 ～ 8	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] PEEK (Natural Ivory)	5	5.5 ～ 8	3 ～ 10	2 ～ 10	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] PEEK (Natural Ivory)	6	6.5 ～ 10	3 ～ 12	2 ～ 12	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] PEEK (Natural Ivory)	8	9 ～ 13	5 ～ 16	2 ～ 15	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Tapered	[Resin] PEEK (Natural Ivory)	10	11 ～ 15	5 ～ 20	3 ～ 20	1 unidades
RoHS Requirements fulfilled	Not Applicable	Round	Flat	[Resin] PEEK (Natural Ivory)	3	3.5 ～ 6	2 ～ 6	2 ～ 10	1 unidades

Preço unitário (excluindo IVA)(Preço unitário incluindo IVA)	Data de envio standard

- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis
- ( - )	7 dias úteis

Seguinte

Informações básicas

Resin locating pins. Prevents scratches. Mount with a threaded screw.

[FY21 New Product]
·Use in combination with round and diamond shapes to position workpieces.

Contorno e especificações

Specifications/Overview

[ ! ] The outer diameter tolerance is the result of measurement at room temperature.