TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model (TSC-EM4L5.5)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: TSC-EM4L5.5
Brand: MISUMI
Price: 70.42 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 5.5 φ
Flute Length (ℓ): 22 mm
Shank Diameter (d): 6 mm
Overall Length (L): 60 mm
Length Under Neck (ℓ1): - mm
- TS
- General Steel
- 4 Flutes
- L (Long)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-EM4L5.5
Part Number
|
|---|
| TSC-EM4L5.5 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
70.42 € | 1 | Available | 5 Days | 5.5 | 22 | 6 | 60 | - | With Lead | Stocked Product | 1 | ● |
Loading...
Specifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | ||
| Outer Diameter D |
Shank Diameter d |
|||||
| TSC-EM4L (Standard) TSC-PEM4L (Sharp Edge) |
1 | — | 4 | 4 | 45 | 1 |
| 1.5 | — | 4 | 6 | 45 | 1 | |
| 2 | — | 4 | 8 | 45 | 1 | |
| 2 | 6 | 6 | 8 | 50 | 1 | |
| 2.5 | — | 4 | 10 | 45 | 1 | |
| 3 | — | 6 | 12 083 |
50 | 1 | |
| 3.5 | — | 6 | 14 | 50 | 1 | |
| 4 | — | 6 | 16 | 50 | 1 | |
| 4.5 | — | 6 | 18 | 50 | 1 | |
| 5 | — | 6 | 20 | 60 | 1 | |
| 5.5 | — | 6 | 22 | 60 | 1 | |
| 6 | — | 6 | 24 | 60 | 2 | |
| 8 | — | 8 | 32 | 70 | 2 | |
| 10 | — | 10 | 40 | 100 | 2 | |
| 12 | — | 12 | 48 | 100 | 2 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● A general-purpose 4-flute end mill for a wide range of applications.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Tolerance of OD(mm) | 0 ~ -0.02 |
This page is TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model, part number TSC-EM4L5.5.
You can find the detail information about specifications and dimensions on part number TSC-EM4L5.5.
Configure
Basic Attributes
-
Length Under Neck (ℓ1)(mm)
-
Type
- SN-TSC-EM4L
- SN-TSC-PEM4L
- SNR-TSC-EM4L
- SNR-TSC-PEM4L
- TSC-EM4L
- TSC-PEM4L
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Geometry
- Sharp Corner
- With Lead
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
Filter by standard shipping days
-
- All
- 5 Days or Less
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-EM4L12 |
| TSC-EM4L2 |
| TSC-EM4L2-6 |
| TSC-EM4L6 |
| TSC-EM4L8 |
| TSC-PEM4L1 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
94.57 € | 1 | Available | 5 Days | 12 | 48 | 12 | 100 | - | With Lead | Stocked Product | 2 | ● | |
28.22 € | 1 | Available | 5 Days | 2 | 8 | 4 | 45 | - | With Lead | Stocked Product | 1 | ● | |
37.02 € | 1 | Available | 5 Days | 2 | 8 | 6 | 50 | - | With Lead | Stocked Product | 1 | ● | |
37.34 € | 1 | Available | 5 Days | 6 | 24 | 6 | 60 | - | With Lead | Stocked Product | 2 | ● | |
60.09 € | 1 | Available | 5 Days | 8 | 32 | 8 | 70 | - | With Lead | Stocked Product | 2 | ● | |
43.32 € | 1 | Available | 5 Days | 1 | 4 | 4 | 45 | - | Sharp Corner | Stocked Product | 1 | ● |
Tech Support
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.