Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!
- Outer Diameter (D)(φ)
- 4
- 6
- 8
- 10
- 12
- R Size(mm)
- 0.813
- 1.219
- 1.625
- 2.031
- 2.438
- Flute Length (ℓ)(mm)
- 8
- 10
- 16
- 20
- 24
- Overall Length (L)(mm)
- 80
- 120
- 135
- 150
- 160
- Shank Diameter (d)(mm)
- 6
- 8
- 10
- 12
- Length Under Neck (ℓ1)(mm)
- 35
- 70
- 85
- 100
- 108
- Dias de envio estimados
- Tudo
- Dentro de 5 dias úteis
TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
Passe o rato sobre a imagem para a aumentar
Número da peça:
candidatos encontrados.Desenho de contorno
Lista de números de peça
| Número da peça |
|---|
Preço unitário (excluindo IVA)(Preço unitário incluindo IVA) | Data de envio standard |
|---|
93.37 € ( 111.11 € ) | 5 dias úteis |
124.50 € ( 148.16 € ) | 5 dias úteis |
99.34 € ( 118.21 € ) | 5 dias úteis |
193.97 € ( 230.82 € ) | 5 dias úteis |
259.45 € ( 308.75 € ) | 5 dias úteis |
Informações detalhadas
Informações básicas
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
Especificações e preço
Specifications
Model Number
TSC-MCR-LS-HFEM3S (3 Flutes)
| Outer Diameter D |
Shoulder Radius R1 |
Base Radius R2 |
Approximate R-Value | Flute Length ℓ |
Under Neck Diameter d1 |
Length Under Neck ℓ1 |
Overall Length L |
Shank Diameter d |
Figure |
| 4 | 0.5 | 4 | 0.813 | 8 | 3.8 | 35 | 80 | 6 | 1 |
| 6 | 0.5 | 9 | 1.219 | 10 | 5.7 | 70 | 120 | 6 | 1 |
| 8 | 1 | 12 | 1.625 | 16 | 7.6 | 85 | 135 | 8 | 2 |
| 10 | 1.5 | 15 | 2.031 | 20 | 9.5 | 100 | 150 | 10 | 2 |
| 12 | 1.5 | 18 | 2.438 | 24 | 11.5 | 108 | 160 | 12 | 2 |
For Cutting Conditions, Refer to >>Click here.
Caraterísticas e exemplos de utilização
More Information
● The shoulder R and base R composite radius eliminate the medium finishing process by (1), enabling high-speed feeding due to thin chippings when bottom-surface machining, and by (2), minimizing the cusp height (leftover) when machining lines at the same height.
● The long neck models not only avoid tool interference, but can also achieve increased efficiency when machining deep grooves.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it yields a high oxidation resistance temperature and high hardness. Ideal for high speed machining and dry machining of anything from raw carbon steel materials to heat-treated / high hardness steel.
[ ! ]This product has a special groove shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding. 