Carbide Straight Edge Taper Radius End Mill, 2-flute
Click on this image to zoom in.
Click on this image to zoom in.
-One-shot finishing of tapered corner radius shape
-Specifying the change makes it possible to choose a coating suitable for the working material
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Shank Diameter d (mm) | Overall Length L (mm) | Processing Applications | #2 | #3 | #4 | #5 | #6 | #7 | 1D | 2D | 3D | 4D | F | FD | MAX | T | Use | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 Days | 3 | 40 | Boss Hole Drilling | 0.4 ～ 2 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 0.9 | 0.5 ～ 8 | - | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 8 Days | 3 | 40 | Boss Hole Drilling | 0.4 ～ 2 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 0.9 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Boss Hole Drilling | ||
| 1 | 8 Days | 4 | 50 | Boss Hole Drilling | 0.4 ～ 3 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.4 | 0.5 ～ 12 | - | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 8 Days | 4 | 50 | Boss Hole Drilling | 0.4 ～ 3 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 6 | 60 | Boss Hole Drilling | 0.4 ～ 5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.4 | 0.5 ～ 20 | - | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 6 | 60 | Boss Hole Drilling | 0.4 ～ 5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 8 | 60 | Boss Hole Drilling | 0.4 ～ 7 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.4 | 0.5 ～ 28 | - | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 8 | 60 | Boss Hole Drilling | 0.4 ～ 7 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 10 | 80 | Boss Hole Drilling | 0.4 ～ 9 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.4 | 0.5 ～ 35 | - | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 10 | 80 | Boss Hole Drilling | 0.4 ～ 9 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 12 | 80 | Boss Hole Drilling | 0.4 ～ 11 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.4 | 0.5 ～ 36 | - | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 12 | 80 | Boss Hole Drilling | 0.4 ～ 11 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 16 | 100 | Boss Hole Drilling | 0.4 ～ 15 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 7.4 | 0.5 ～ 48 | - | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 16 | 100 | Boss Hole Drilling | 0.4 ～ 15 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 7.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Boss Hole Drilling | ||
| 1 | 8 Days | 3 | 60 | Boss Hole Drilling | - | 0.4 ～ 2 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 0.9 | 0.5 ～ 8 | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 8 Days | 3 | 60 | Boss Hole Drilling | - | 0.4 ～ 2 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 0.9 | - | - | - | - | - | F | - | MAX | T | For Boss Hole Drilling | ||
| 1 | 8 Days | 4 | 80 | Boss Hole Drilling | - | 0.4 ～ 3 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.4 | 0.5 ～ 12 | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 8 Days | 4 | 80 | Boss Hole Drilling | - | 0.4 ～ 3 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.4 | - | - | - | - | - | F | - | MAX | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 6 | 90 | Boss Hole Drilling | - | 0.4 ～ 5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.4 | 0.5 ～ 20 | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 6 | 90 | Boss Hole Drilling | - | 0.4 ～ 5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.4 | - | - | - | - | - | F | - | MAX | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 8 | 90 | Boss Hole Drilling | - | 0.4 ～ 7 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.4 | 0.5 ～ 28 | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 8 | 90 | Boss Hole Drilling | - | 0.4 ～ 7 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.4 | - | - | - | - | - | F | - | MAX | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 10 | 120 | Boss Hole Drilling | - | 0.4 ～ 9 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.4 | 0.5 ～ 35 | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 10 | 120 | Boss Hole Drilling | - | 0.4 ～ 9 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.4 | - | - | - | - | - | F | - | MAX | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 12 | 120 | Boss Hole Drilling | - | 0.4 ～ 11 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.4 | 0.5 ～ 36 | - | - | - | - | F | - | - | T | For Boss Hole Drilling | ||
| 1 | 7 Days | 12 | 120 | Boss Hole Drilling | - | 0.4 ～ 11 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.4 | - | - | - | - | - | F | - | MAX | T | For Boss Hole Drilling | ||
| 1 | 8 Days | 3 | 60 | Flank / Groove Processing | - | 0.4 ～ 2 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 0.9 | 0.5 ～ 8 | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 8 Days | 3 | 60 | Flank / Groove Processing | - | 0.4 ～ 2 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 0.9 | - | - | - | - | - | F | - | MAX | T | For Radial Groove Milling | ||
| 1 | 8 Days | 4 | 80 | Flank / Groove Processing | - | 0.4 ～ 3 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.4 | 0.5 ～ 12 | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 8 Days | 4 | 80 | Flank / Groove Processing | - | 0.4 ～ 3 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.4 | - | - | - | - | - | F | - | MAX | T | For Radial Groove Milling | ||
| 1 | 7 Days | 6 | 90 | Flank / Groove Processing | - | 0.4 ～ 5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.4 | 0.5 ～ 20 | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 7 Days | 6 | 90 | Flank / Groove Processing | - | 0.4 ～ 5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.4 | - | - | - | - | - | F | - | MAX | T | For Radial Groove Milling | ||
| 1 | 7 Days | 8 | 90 | Flank / Groove Processing | - | 0.4 ～ 7 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.4 | 0.5 ～ 28 | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 7 Days | 8 | 90 | Flank / Groove Processing | - | 0.4 ～ 7 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.4 | - | - | - | - | - | F | - | MAX | T | For Radial Groove Milling | ||
| 1 | 7 Days | 10 | 120 | Flank / Groove Processing | - | 0.4 ～ 9 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.4 | 0.5 ～ 35 | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 7 Days | 10 | 120 | Flank / Groove Processing | - | 0.4 ～ 9 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.4 | - | - | - | - | - | F | - | MAX | T | For Radial Groove Milling | ||
| 1 | 7 Days | 12 | 120 | Flank / Groove Processing | - | 0.4 ～ 11 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.4 | 0.5 ～ 36 | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 7 Days | 12 | 120 | Flank / Groove Processing | - | 0.4 ～ 11 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.4 | - | - | - | - | - | F | - | MAX | T | For Radial Groove Milling | ||
| 1 | 8 Days | 3 | 40 | Flank / Groove Processing | 0.4 ～ 2 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 0.9 | 0.5 ～ 8 | - | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 8 Days | 3 | 40 | Flank / Groove Processing | 0.4 ～ 2 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 0.9 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Radial Groove Milling | ||
| 1 | 8 Days | 4 | 50 | Flank / Groove Processing | 0.4 ～ 3 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.4 | 0.5 ～ 12 | - | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 8 Days | 4 | 50 | Flank / Groove Processing | 0.4 ～ 3 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Radial Groove Milling | ||
| 1 | 7 Days | 6 | 60 | Flank / Groove Processing | 0.4 ～ 5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.4 | 0.5 ～ 20 | - | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 7 Days | 6 | 60 | Flank / Groove Processing | 0.4 ～ 5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Radial Groove Milling | ||
| 1 | 7 Days | 8 | 60 | Flank / Groove Processing | 0.4 ～ 7 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.4 | 0.5 ～ 28 | - | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 7 Days | 8 | 60 | Flank / Groove Processing | 0.4 ～ 7 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Radial Groove Milling | ||
| 1 | 7 Days | 10 | 80 | Flank / Groove Processing | 0.4 ～ 9 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.4 | 0.5 ～ 35 | - | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 7 Days | 10 | 80 | Flank / Groove Processing | 0.4 ～ 9 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Radial Groove Milling | ||
| 1 | 7 Days | 12 | 80 | Flank / Groove Processing | 0.4 ～ 11 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.4 | 0.5 ～ 36 | - | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 7 Days | 12 | 80 | Flank / Groove Processing | 0.4 ～ 11 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Radial Groove Milling | ||
| 1 | 7 Days | 16 | 100 | Flank / Groove Processing | 0.4 ～ 15 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 7.4 | 0.5 ～ 48 | - | - | - | - | - | F | - | - | T | For Radial Groove Milling | ||
| 1 | 7 Days | 16 | 100 | Flank / Groove Processing | 0.4 ～ 15 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 7.4 | - | - | 1 | 2 | 3 | 4 | F | FD | MAX | T | For Radial Groove Milling |
Loading...
Specification Table
| Model Number | Blade Diameter D 0.005 mm Unit Specification | Single Corner θ °−min 1' Unit Specification | Radius R 0.01mm Unit Specification | Blade Length* ℓ 0.5 mm Unit Specification | Bottom Blade Shape (Selection) | Overall Length L | |||
| Shank diameter d | |||||||||
| Specified Range | ℓmax. | BSTRC | LS−BSTRC | ||||||
| BSTRC LS−BSTRC (Long Shank) | 3 | 0.400 to 2.000 | 0°15' to 30°0' | 0.10 ≤ R ≤ (D−0.2)/2 | (1) 0.5 ≤ ℓ ≤ D×4 and (2) ℓ ≤ ℓmax. (See table at right) and (3)  | 8.0 | T (Indented Center) F (Flat) | 40 | 60 |
| 4 | 0.400 to 3.000 | 12.0 | 50 | 80 | |||||
| 6 | 0.400 to 5.000 | 20.0 | 60 | 90 | |||||
| 8 | 0.400 to 7.000 | 28.0 | 60 | 90 | |||||
| 10 | 0.400 to 9.000 | 35.0 | 80 | 120 | |||||
| 12 | 0.400 to 11.000 | 36.0 | 80 | 120 | |||||
| 16 | 0.400 to 15.000 | 48.0 | 100 | − | |||||
| Model Number | Blade Diameter D 0.01mm Unit Specification | Single Corner θ °−min 1' Unit Specification | Radius R 0.01mm Unit Specification | Blade Length* ℓ 0.5 mm Unit Specification | Bottom Blade Shape (Selection) | Overall Length L | |||
| Shank diameter d | |||||||||
| Specified Range | ℓmax. | STREM | LS−STREM | ||||||
| STREM LS−STREM (Long Shank) | 3 | 0.40 to 2.00 | 0°15' to 30°0' | 0.10 ≤ R ≤ (D−0.2)/2 | (1) 0.5 ≤ ℓ ≤ D×4 and (2) ℓ ≤ ℓmax. (See table at right) and (3) | 8.0 | T (Indented Center) F (Flat) | 40 | 60 |
| 4 | 0.40 to 3.00 | 12.0 | 50 | 80 | |||||
| 6 | 0.40 to 5.00 | 20.0 | 60 | 90 | |||||
| 8 | 0.40 to 7.00 | 28.0 | 60 | 90 | |||||
| 10 | 0.40 to 9.00 | 35.0 | 80 | 120 | |||||
| 12 | 0.40 to 11.00 | 36.0 | 80 | 120 | |||||
| 16 | 0.40 to 15.00 | 48.0 | 100 | − | |||||
*Specify ℓ so that it meets all the conditions of (1), (2) and (3).
*Depending on the size of ℓ, all slope angles may be the blade length.
● BSTRC/LS−BSTRC
Click here for the cutting conditions (Cutting by end mill for carbide straight edge boss machining)
● STREM/LS−STREM
Click here for cutting conditions (groove cutting with customized straight blade end mill)
Basic information
| Material | Ultrafine Particulate Carbide |
|---|
Configure
Basic Attributes
-
Shank Diameter d(mm)
- 3
- 4
- 6
- 8
- 10
- 12
- 16
-
Overall Length L(mm)
-
Processing Applications
- Boss Hole Drilling
- Flank / Groove Processing
-
#2
-
#3
-
#4
-
#5
-
#6
-
#7
-
1D
- 1
-
2D
- 2
-
3D
- 3
-
4D
- 4
-
F
- F
-
FD
- FD
-
MAX
- MAX
-
T
- T
-
Type
- BSTRC
- LS-BSTRC
- LS-STREM
- STREM
Filter by standard shipping days
-
- All
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.