Condições de filtragem
- Tool Diameter(mm)
- 10.005
- Groove Length(mm)
- 30
- Shank Diameter d(mm)
- 10
- Number of Flutes(Sheet(s))
- 6
- Overall Length L(mm)
- 150
- Type
- Dias de envio estimados
- Tudo
- Dentro de 5 dias úteis
Spiral Reamer with Carbide Bottom Blade (SEC-ECSPHR10.005)
Desenho de contorno
Informações detalhadas
Informações básicas
[Features]
-Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function
-Direct reaming is possible without correction by an end mill after drilling a pilot hole
-Even higher cutting speed is possible by using spiral grooves
Especificações e preço
Specifications
Model Number
SEC-ECSPHR
| Flute Diameter D | Chamfer Length T | Blade Length ℓ | Under Neck ℓ1 | Overall Length L | Shank Diameter d | Number of Flutes | Bottom Blade Shape |
| 3 | 0.15 | 20 | 40 | 65 | 3 | 4 | Flat |
| 3.005 | 0.15 | 20 | 40 | 65 | 3 | 4 | |
| 3.01 | 0.15 | 20 | 40 | 65 | 3 | 4 | |
| 4 | 0.2 | 20 | 40 | 65 | 4 | 4 | |
| 4.005 | 0.2 | 25 | 45 | 75 | 4 | 4 | |
| 4.01 | 0.2 | 25 | 45 | 75 | 4 | 4 | |
| 5 | 0.2 | 25 | 45 | 75 | 5 | 4 | |
| 5.005 | 0.2 | 25 | 45 | 75 | 5 | 4 | |
| 5.01 | 0.2 | 25 | 45 | 75 | 5 | 4 | |
| 6 | 0.3 | 25 | 65 | 100 | 6 | 6 | |
| 6.005 | 0.3 | 25 | 65 | 100 | 6 | 6 | |
| 6.01 | 0.3 | 25 | 65 | 100 | 6 | 6 | |
| 7 | 0.3 | 25 | 70 | 110 | 7 | 6 | |
| 7.005 | 0.3 | 25 | 70 | 110 | 7 | 6 | |
| 7.01 | 0.3 | 25 | 70 | 110 | 7 | 6 | |
| 8 | 0.3 | 25 | 85 | 125 | 8 | 6 | |
| 8.005 | 0.3 | 25 | 85 | 125 | 8 | 6 | |
| 8.01 | 0.3 | 25 | 85 | 125 | 8 | 6 | |
| 9 | 0.3 | 30 | 90 | 135 | 9 | 6 | |
| 9.005 | 0.3 | 30 | 90 | 135 | 9 | 6 | |
| 9.01 | 0.3 | 30 | 90 | 135 | 9 | 6 | |
| 10 | 0.3 | 30 | 100 | 150 | 10 | 6 | |
| 10.005 | 0.3 | 30 | 100 | 150 | 10 | 6 | |
| 10.01 | 0.3 | 30 | 100 | 150 | 10 | 6 |
For Cutting Conditions, Refer to >>Click here.
Caraterísticas e exemplos de utilização
More Information
● Skew compensation for the hole can be achieved using the milling effect, simultaneously with improved surface roughness using the burnishing effect.
● Following the drilling of pilot holes, reaming can be done directly without going through the correction process with end milling.
● It is possible for high-speed cutting to be done even faster by adopting a helical flute.