Adjuster with Bottom Part Rubber for Light Vibration-Proofing (Thrust Bearing Equipped) WD-A III /WD-B III

Promotional pricing ends 30/11/2024
Volume Discount

An adjuster for light vibration-proofing with a thrust bearing that enables smooth leveling. Note: Please be advised that the model number in VONA has been changed from "WD-A III" to "WD-A3."

[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bolt bottom.
· A nylon washer is used between the receiver and bolt. and rotation is smooth.
· Suitable for office equipment, etc.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Product specification
Part Numbers

Data to be displayed: 30; 45; 60

Part Number
WD-B3 12X70
WD-B3 20X130

Part Number

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Width A (mm)	Load Resistance (kN)	Thread Length L1 (mm)	Main Body Height l (mm)	Thread Nominal M (mm)
	9.03 € 6.32 €	1	Available	Same day Stock	50	4.9	70	15	12
	16.86 € 11.80 €	1	Available	Same day Stock	60	6.86	130	17	20

Standard Unit Price

Minimum order quantity

Volume Discount

Standard
Shipping Days
?

Width A
(mm)

Load Resistance
(kN)

Thread Length L1
(mm)

Main Body Height l
(mm)

Thread Nominal M
(mm)

9.03 €

6.32 €

Available

Same day

4.9

16.86 €

11.80 €

Available

Same day

6.86

130

Basic information

Type	Adjusting Bolt Shape	Adjusting Bolt Shape Type	With Bottom Rubber, Internal Bearing	Height Adjusting Handle	NA
Screw Material	EN 1.0038 Equiv.	Surface Treatment of Thread	Electrodeposited Coating Nut Portion Black Zinc Plating (Trivalent Chromate Treatment Possible)	Catch Plate	SS Cold Rolled Steel Plate
Surface Treatment	Electrodeposited Coating Nut Portion Black Zinc Plating (Trivalent Chromate Treatment Possible)	Material of rubber part	Chloroprene Rubber	Properties	Performance of Vibration Proofing
Swivel Mechanism	NA	Adjusting for Hex Socket "No Licking"	NA