Keyless Bushing A.P.LOCK SAPC Series

Promotional pricing ends 31/12/2024
Volume Discount

[Features]
· Made from aluminum.
Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
· Optimal for aluminum pulleys.
When running a servo motor with a timing pulley, conventional friction connection units apply high pressure to the surfaces, which prevents the hub diameter from sitting properly and causes problems with slippage. The SAPC series uses servo motor torque specifications as the basis for reducing the bolt count and lowering pressure on surfaces, making it possible to connect to aluminum pulleys without difficulty.
· Staged machining structure.
Designed so that the push plate of the bearing could carry out its role, eliminating the need for the use of a separate bearing push plate.
· Easy assembly and position setting.
For conventional power locks, a space of 1 mm from there counterpart items is required to facilitate disassembly, but the SAPC series has a structure that is easy to disassemble even if there is no room for the hub to move during disassembly. Also, position setting is easy.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Products homepage

Data to be displayed: 30; 45; 60

Part Number
SAPC-5-16
SAPC-8-19
SAPC-12-24
SAPC-14-26

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Shaft Bore Dia. d (Ø)	Allowable Torque Range (N•m)	Hub Dia. D1 (Ø)	Allowable Torque (N•m)
22.71 € 15.90 €	1		Same day Stock	10	5	2.0 to 20.0	16	2.5
25.24 € 17.67 €	1	Available	Same day Stock	10	8	2.0 to 20.0	19	6
23.20 €	1		10 Days	10	12	2.0 to 20.0	24	12
24.59 €	1		10 Days	10	14	2.0 to 20.0	26	18

Basic information

Type	Flange	Centering	NA	Body Material	Aluminum
Surface Treatment	Anodized Aluminum	Tightening Structure	Single cone type	Tightening Method	Mechanical (Wedge Type)

Configure

4Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Shaft Bore Dia. d(Ø)
5

8

12

14

16

17

19

20

35
Clear
Hub Dia. D1(Ø)
16

19

24

26

29

30

32

37

56
Clear
Allowable Torque(N•m)
2.5

6

12

18

26

27

33

54

230
Clear
Type
- SAPC-1
- SAPC-2
- SAPC-3
- SAPC-5
- SAPC-8
Clear
Allowable Torque Range(N•m)
2.0 to 20.0

20.1 to 50.0

70.1 to 100.0

200.1 to 300.0
Clear
Filter by CAD data type
- 2D
Clear