- Thread type
- Connection port size
- Option
- Specifications
- Type
- Type
- CAD
- 2D
- 3D
- Dias de envio estimados
- Tudo
- Dentro de 26 dias úteis
Booster Regulator, VBA Series (VBA43A-T04GN)
Informações do produto
Booster Regulator VBA Series Details
Booster Regulator VBA Series: product images
Booster Regulator VBA Series Specifications
Model Number Notation
Model number notation: images
Thread Type / Option Combinations Table
| Body size | Thread type | Option | Semi-standard | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No symbol | G | N | S | GN | GS | LN | LS | GLN | GLS | No symbol | -Z | ||
| 10A 11A | No symbol | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | - |
| F | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | - | |
| N | ● | ● | ● | - | ● | - | ● | - | ● | - | ● | ● | |
| T | ● | ● | ● | - | ● | - | ● | - | ● | - | ● | ● | |
| 20A 22A | No symbol | ● | ● | ● | ● | ● | ● | - | ● | - | |||
| F | ● | ● | ● | ● | ● | ● | ● | - | |||||
| N | ● | ● | ● | ● | ● | ● | ● | ● | |||||
| T | ● | ● | ● | ● | ● | ● | ● | ● | |||||
| 40A 42A 43A | No symbol | ● | ● | ● | ● | ● | ● | - | ● | - | |||
| F | ● | ● | ● | ● | ● | ● | ● | - | |||||
| N | ● | ● | ● | ● | ● | ● | ● | ● | |||||
| T | ● | ● | ● | ● | ● | ● | ● | ● | |||||
Specifications Table
| Model | VBA10A-02 | VBA20A-03 | VBA40A-04 | VBA22A-03 | VBA42A-04 | VBA43A-04 | VBA11A-02 |
|---|---|---|---|---|---|---|---|
| Applicable fluids | Compressed air | ||||||
| Pressure increase ratio | 2 times | 2 to 4 times Note 4) | |||||
| Pressure adjustment mechanism | Knob-operated type with relief machenism Note 2) | Air-operated type | Knob-operated type with relief machenismNote 2) | ||||
| Maximum flow rate Note 3) L/min (ANR) | 230 | 1,000 | 1,900 | 1,000 | 1,900 | 1,600 | 70 |
| Set pressure range: MPa | 0.2 to 2.0 | 0.2 to 1.0 | 0.2 to 1.0 | 0.2 to 1.6 | 0.2 to 2.0 | ||
| Supply pressure range - MPa | 0.1 to 1.0 | ||||||
| Proof pressure - MPa | 3 | 1.5 | 2.4 | 3 | |||
| Port size (IN, OUT, EXH 3 locations) - Rc | 1/4 | 3/8 | 1/2 | 3/8 | 1/2 | 1/4 | |
| Pressure gauge port size (IN, OUT 2 locations) - Rc | 1/8 | ||||||
| Tank connection port (with plug) Note 5) | 1/4 | 3/8 | 1/2 | 3/8 | 1/2 | 1/4 | |
| Ambient and fluid temperature °C | 2 to 50 (no freezing) | ||||||
| Installation | Horizontal | ||||||
| Lubrication | Grease (non-lube) | ||||||
| Weight - kg | 0.84 | 3.9 | 8.6 | 3.9 | 8.6 | 8.6 | 0.89 |
Note 2) If the OUT pressure is higher than the set pressure for the handle, excess pressure will be exhausted from the back of the handle.
Note 3) Flow rate at IN = OUT = 0.5 MPa. The pressure varies according to the operating conditions.
Note 4) Configure the pressure so that it is at least double the pressure increase ratio.
Note 5) The tank connection port cannot be used for purposes other than connection with VBAT.
Structural Drawings and Replacement Parts
VBA10A structural diagrams
VBA11A structural diagrams
VBA20A/22A/40A/42A/43A structural diagrams
Replacement Parts / Kit of Replacement Parts
Order using the corresponding model numbers below.
| Model | VBA10A | VBA20A | VBA40A | VBA22A | VBA42A | VBA43A | VBA11A |
|---|---|---|---|---|---|---|---|
| Order number | KT-VBA10A-1 | KT-VBA20A-1 | KT-VBA40A-1 | KT-VBA22A-1 | KT-VBA42A-1 | KT-VBA43A-1 | KT-VBA11A-20 |
The kit is comprised of items (1) through (7) and a grease pack set.
| Number | Part name | Model | ||||||
|---|---|---|---|---|---|---|---|---|
| VBA10A | VBA20A | VBA40A | VBA22A | VBA42A | VBA43A | VBA11A | ||
| Quantity | ||||||||
| 1 | Piston seal | 2 | 2 large, 1 small | 2 | 1 each, large and small | |||
| 2 | Governor assembly | 1 | ||||||
| 3 | Check valve | 4 | 2 | |||||
| 4 | Gasket | 2 | ||||||
| 5 | Rod seal | 1 | ||||||
| 6 | Mounting screw | - | 8 | 12 | 8 | 12 | - | |
| 7 | Cover C assembly | - | 1 | |||||
| - | Grease pack | 1 | 2 | 1 | 2 | 1 | ||
- *The grease pack has 10 g of grease.
- *Refer to the maintenance procedures when carrying out maintenance.
Informações detalhadas
Informações básicas
The Booster Regulator VBA Series features air-only operation, so no electricity is needed. Furthermore, it is also easy-to-install and also generates only low amounts of heat.
[Features]
· Floating piston structure.
· Metal noise reduced by the implementation of a damper on the impact part of the switching valve.
· The high noise-reduction silencer reduces exhaust noise.
· Features a built-in mesh filter at the IN port, preventing operation failure due to contamination by foreign matter.
· The air-feeding tube is integrated with the main tube, mitigating condensation caused by cooling during exhaust expansion.
· Standard fittings can be used, enabling remote pressure monitoring, etc.
Cuidado
- Refer to the catalog for details on product specifications.
- The products shown in the image are representative.