Stainless Steel-Knurled screws with recessed stud for loss prevention (Part Numbers - CAD Download)

Promotional pricing ends 31/12/2024
Volume Discount

Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

653.2-M8-30-NI

Products homepage

Data to be displayed: 30; 45; 60

Part Number
653.2-M8-30-NI

Part Number

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Length l (mm)	Thread d1
	11.46 € 8.02 €	1	Available	Same day Stock	30	M 8

Standard Unit Price

Minimum order quantity

Volume Discount

Standard
Shipping Days
?

Length l
(mm)

Thread d1

11.46 €

8.02 €

Available

Same day

M 8

Basic information

Material	Stainless Steel

This page is Stainless Steel-Knurled screws with recessed stud for loss prevention, part number 653.2-M8-30-NI.
You can find the detail information about specifications and dimensions on part number 653.2-M8-30-NI.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Type
- 653.2
Clear
Length l(mm)
15

17

18

19

20

21

22

24

26

30

34

38

42
Clear
Thread d1
M 4

M 5

M 6

M 8
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

7 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
653.2-M4-21-NI
653.2-M5-18-NI
653.2-M5-20-NI
653.2-M8-34-NI
653.2-M8-38-NI
653.2-M8-42-NI

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Length l (mm)	Thread d1
5.26 €	1	Available	7 Days	21	M 4
5.80 €	1	Available	Same day Stock	18	M 5
6.22 €	1	Available	7 Days	20	M 5
11.70 €	1	Available	Same day Stock	34	M 8
12.28 €	1	Available	Same day Stock	38	M 8
12.68 €	1	Available	7 Days	42	M 8