Stainless Steel-Knurled screws with recessed stud for loss prevention (Part Numbers - CAD Download)
- Promotional pricing ends 30/11/2024
- Volume Discount
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
653.2-M5-18-NI
Basic information
| Material | Stainless Steel |
|---|
This page is Stainless Steel-Knurled screws with recessed stud for loss prevention, part number 653.2-M5-18-NI.
You can find the detail information about specifications and dimensions on part number 653.2-M5-18-NI.
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| 653.2-M4-17-NI |
| 653.2-M4-19-NI |
| 653.2-M4-21-NI |
| 653.2-M5-20-NI |
| 653.2-M5-22-NI |
| 653.2-M5-26-NI |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Length l (mm) | Thread d1 |
|---|---|---|---|---|---|---|
5.40 € | 1 | Available |
Same day
Stock | 17 | M 4 | |
5.22 € | 1 | Available |
Same day
Stock | 19 | M 4 | |
5.26 € | 1 | Available | 7 Days | 21 | M 4 | |
6.22 € | 1 | Available | 7 Days | 20 | M 5 | |
6.30 € | 1 | Available | 7 Days | 22 | M 5 | |
6.84 € | 1 | Available |
Same day
Stock | 26 | M 5 |
Tech Support
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.