5-Port Solenoid Valve, Base Mounted, Single Unit, SY3000 / 5000 / 7000 / 9000 Series (Part Numbers - CAD Download)

Promotional pricing ends 31/12/2024

SMC

5-Port solenoid valve base mounted single Unit SY3000/5000/7000/9000 series.

(i)Remark

Product images may be representative. Refer to the manufacturer's catalog for details.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Product specification
Part Numbers
Catalog

5-Port Solenoid Valve, Base Mounted, Single Unit SY3000/SY5000/SY7000/SY9000 Series Specifications

5-Port Solenoid Valve, Base Mounted, Single Unit SY3000/SY5000/SY7000/SY9000 Series external appearance

Series			SY3000	SY5000	SY7000	SY9000
Usable Fluids			Air
Internal Pilot Operating Pressure Range MPa	2 position single		0.15 to 0.7
	2 position double		0.1 to 0.7
	3 position		0.2 to 0.7
External Pilot Operating Pressure Range MPa	Operating Pressure Range		-100 kPa to 0.7
	Pilot Pressure Range	2-position double	0.25 to 0.7
		2-position single	0.25 to 0.7
		3 Position	0.25 to 0.7
Ambient and Fluid temperature (°C)			-10 to 50 (no freezing)
Maximum Operating frequency (Hz)	2 position single, double		10	5	5	5
Maximum Operating frequency (Hz)	3 position		3	3	3	3
Manual Operation			Non-locking push type, push-turn locking slotted type, push-turn locking lever type
Pilot Exhaust Method	Internal pilot		Main valve, pilot valve common exhaust type
Pilot Exhaust Method	External pilot		Pilot valve individual exhaust type
Lubrication			Not required
Mounting Orientation			Unrestricted
^*Impact Resistance/Vibration Resistance (m/s²)			150/30
Enclosure			Dust-proof (*DIN terminal and M8 connector are IP65)

*Based on IEC60529.
*Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)

Solenoid Specifications

Electrical Entry			Grommet (G)/(H) L-type plug connector (L) M-type plug connector (M) DIN terminal (D)/(Y) M8 connector (W)
Electrical Entry			G, H, L, M, W	D, Y
Coil-rated Voltage (V)	DC		24, 12, 6, 5, 3	24, 12
Coil-rated Voltage (V)	AC 50/60 Hz		100, 110, 200, 220
Allowable Voltage Fluctuation			±10% of rated voltage*
Power Consumption W	DC	Standard	0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)]
Power Consumption W	DC	With power saving circuit	0.1 (only with light) * [Startup 0.4, holding 0.1]
*Apparent Power VA	AC	100 V	0.78 (with light: 0.81)	0.78 (with light: 0.87)
		110 V 115 V	0.86 (with light: 0.89) [0.94 (with indicator light: 0.97)]	0.86 (with light: 0.97) [0.94 (with light: 1.07)]
		200 V	1.18 (with light: 1.22)	1.15 (with light: 1.30)
		220 V [230 V]	1.30 (with light: 1.34) [1.42 (with light: 1.46)]	1.27 (with light: 1.46) [1.39 (with light: 1.60)]
Surge Voltage Suppressor			Diode (varistor for DIN terminal and non-polar type are )
Indicator Light			LED (neon bulb for DIN terminal AC)

*The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
*Energy-saving circuit not available with DIN terminal / M8 connector.
For details, see the SMC catalog.

Flow Rate Characteristics / Weight Table

Model: SY3000 Series

Valve Model Numbers	Type of Actuation		Port Size	^*1: Flow Rate Characteristics						^*2:Weight (g)
				1 → 4/2 (P → A/B)			4/2 → 5/3 (A/B → EA/EB)			^*2:Weight (g)
				C (dm³ / [s·bar])	b	Cv	C (dm³ / [s·bar])	b	Cv	Grommet	L, M plug connector	W M8 connector
SY3□40-□-01	2 Position	Single	1/8	1.0	0.30	0.24	1.1	0.30	0.26	84 (50)	85 (53)	89 (57)
	2 Position	Double		1.0	0.30	0.24	1.1	0.30	0.26	102 (68)	107 (73)	115 (81)
	3 Position	Closed Center		0.77	0.28	0.18	0.85	0.30	0.19	104 (69)	109 (74)	117 (82)
		Exhaust Center		0.73	0.31	0.18	1.1 [0.55]	0.26 [0.52]	0.24 [0.16]
		Pressure Center		1.2 [0.51]	1.2 [0.51]	0.29 [0.14]	0.89	0.47	0.24

*1: Values shown inside brackets are when at normal position.
*2: Values inside parentheses are for models without a sub-plate.

Model: SY5000 Series

Valve Model Numbers	Type of Actuation		Port Size	^*1: Flow Rate Characteristics						^*2:Weight (g)
				1 → 4/2 (P → A/B)			4/2 → 5/3 (A/B → EA/EB)			^*2:Weight (g)
				C (dm³ / [s·bar])	b	Cv	C (dm³ / [s·bar])	b	Cv	Grommet	L, M plug connector	DIN terminal	W M8 connector
SY5□40-□-02	2 Position	Single	1/4	2.4	0.41	0.64	2.8	0.29	0.66	121 (58)	123 (61)	154 (92)	127 (65)
	2 Position	Double		2.4	0.41	0.64	2.8	0.29	0.66	139 (76)	144 (81)	186 (123)	152 (89)
	3 Position	Closed Center		1.8	0.47	0.50	1.8	0.40	0.47	144 (82)	150 (87)	192 (129)	158 (95)
		Exhaust Center		1.4	0.55	0.44	3.0 [1.2]	0.33 [0.48]	0.72 [0.37]
		Pressure Center		3.3 [0.84]	0.36 [0.60]	0.85 [0.28]	1.8	0.40	0.48

*1: Values shown inside brackets are when at normal position.
*2: Values inside parentheses are for models without a sub-plate.

Model: SY7000 Series

Valve Model Numbers	Type of Actuation		Port size	^*1: Flow Rate Characteristics						^*2:Weight (g)
				1 → 4/2 (P → A/B)			4/2 → 5/3 (A/B → EA/EB)			^*2:Weight (g)
				C (dm³ / [s·bar])	b	Cv	C (dm³ / [s·bar])	b	Cv	Grommet	L, M plug connector	DIN terminal	DIN terminal
SY7□40-□-02	2 Position	Single	1/4	4.1	0.41	1.1	4.1	0.29	1.0	218 (89)	221 (92)	242 (113)	225 (96)
	2 Position	Double		4.1	0.41	1.1	4.1	0.29	1.0	237 (108)	242 (113)	284 (155)	250 (121)
	3 Position	Closed Center		3.0	0.43	0.8	2.6	0.41	0.72	239 (110)	245 (116)	287 (158)	253 (124)
		Exhaust Center		2.6	0.42	0.71	4.7 [1.7]	0.35 [0.48]	1.1 [0.49]
		Pressure Center		5.3 [2.3]	0.39 [0.49]	1.3 [0.65]	2.2	0.49	0.63
SY7□40-□-03	2 Position	Single	3/8	4.9	0.29	1.2	4.5	0.27	1.1	218 (89)	221 (92)	242 (113)	225 (96)
	2 Position	Double		4.9	0.29	1.2	4.5	0.27	1.1	237 (108)	242 (113)	284 (155)	250 (121)
	3 Position	Closed Center		3.0	0.40	0.80	2.6	0.45	0.73	239 (110)	245 (116)	287 (158)	253 (124)
		Exhaust Center		2.6	0.42	0.71	4.8 [1.7]	0.35 [0.48]	1.1 [0.49]
		Pressure Center		5.3 [2.3]	0.31 [0.51]	1.3 [0.64]	2.3	0.45	0.66

*1: Values shown inside brackets are when at normal position.
*2: Values inside parentheses are for models without a sub-plate.

Model: SY9000 Series

Valve Model Numbers	Type of Actuation		Port size	^*1: Flow Rate Characteristics						^*2:Weight (g)
				1 → 4/2 (P → A/B)			4/2 → 5/3 (A/B → EA/EB)			^*2:Weight (g)
				C (dm³ / [s·bar])	b	Cv	C (dm³ / [s·bar])	b	Cv	Grommet	L, M plug connector	DIN terminal	DIN terminal
SY9□40-□-03	2 Position	Single	3/8	7.9	0.34	2.0	9.6	0.43	2.6	469 (172)	472 (175)	493 (196)	476 (179)
	2 Position	Double		7.9	0.34	2.0	9.6	0.43	2.6	488 (191)	472 (197)	535 (239)	502 (205)
	3 Position	Closed Center		7.5	0.33	1.8	7.3	0.30	1.7	512 (215)	518 (221)	560 (263)	526 (229)
		Exhaust Center		7.2	0.34	1.7	13 [4.0]	0.23 [0.41]	2.8 [0.95]
		Pressure Center		12 [3.3]	0.26 [0.41]	2.8 [0.84]	6.7	0.40	1.9
SY9□40-□-04	2 Position	Single	1/2	8.0	0.48	2.2	10	0.29	2.5	448 (172)	453 (175)	472	457 (179)
	2 Position	Double		8.0	0.48	2.2	10	0.29	2.5	467 (191)	473 (197)	515	481 (205)
	3 Position	Closed Center		7.6	0.32	1.8	7.3	0.32	1.8	491 (215)	497 (221)	539	509 (229)
		Exhaust Center		7.3	0.42	2.0	13 [4.7]	0.32 [0.54]	3.6 [1.5]
		Pressure Center		12 [3.3]	0.33 [0.51]	3.3 [0.94]	7.4	0.33	1.9

*1: Values shown inside brackets are when at normal position.
*2: Values inside parentheses are for models without a sub-plate.

Structure Drawing

2 position single structure drawing

2-position single indicator symbol

2-position double structure drawing

2-position double display symbol

Component Parts

1.Body material: Aluminum die-casted (SY3000 is zinc diecast) / White
2.Adapter plate material: Resin / White
3.End plate material: Resin / White
4.Piston material: Resin
5.Spool valve assembly material: Aluminum, H-NBR
6.Sub-plate* material: Aluminum die-casted
7.Pilot valve assembly
8.Gasket (Standard / CE-compliant product) material: H-NBR

*Mounting screw maximum tightening torque: M2 (0.16 N⋅m) / M3 (0.8 N⋅m) / M4 (1.4 N⋅m)

Outline dimensional drawing

*Values in [ ] are for AC.

(Unit: mm)

2-position single grommet (G), (H): SY3140 (R)-□G/H□□-01□ dimensional drawings

(Unit: mm)

Dimensional drawing of model with spacer type pressure reducing valve

(Unit: mm)

L plug connector (L): SY3140(R)-□L□□-01□ dimensional drawing

(Unit: mm)

M plug connector (M): SY3140(R)-□M□□-01□ dimensional drawing

(Unit: mm)

M8 connector (WO): SY3140(R)-□WO□□-01□ dimensional drawing

*See the manufacturer's catalog for information other than that above.

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
SY3240-3DZ-Q
SY3240-4DZ-Q
SY3240-5D-Q
SY3240-5DZ-01F-Q
SY3240-5DZ-Q
SY3240-5G-01-Q
SY3240-5G-Q
SY3240-5GS-Q
SY3240-5GU-Q
SY3240-5GZ-01-Q
SY3240-5GZ-Q
SY3240-5GZD-Q
SY3240-5H-01-Q
SY3240-5H-Q
SY3240-5HS-01-Q
SY3240-5HS-Q
SY3240-5HU-Q
SY3240-5HZ-01-Q
SY3240-5HZ-Q
SY3240-5HZD-Q
SY3240-5L-01F-Q
SY3240-5L-Q
SY3240-5LNZ-Q
SY3240-5LO-01-Q
SY3240-5LO-Q
SY3240-5LOD-Q
SY3240-5LOSD-Q
SY3240-5LOU-01-Q
SY3240-5LOU-01F-Q
SY3240-5LOU-Q
SY3240-5LOUD-Q
SY3240-5LOUE-Q
SY3240-5LOZ-01F-Q
SY3240-5LOZ-01T-Q
SY3240-5LOZ-Q
SY3240-5LOZD-Q
SY3240-5LOZE-Q
SY3240-5LS-Q
SY3240-5LU-Q
SY3240-5LZ-01-Q
SY3240-5LZ-01T-Q
SY3240-5LZ-Q
SY3240-5LZD-Q
SY3240-5LZE-Q
SY3240-5M-Q
SY3240-5MN-Q
SY3240-5MNU-Q
SY3240-5MNUD-01-Q
SY3240-5MNZ-Q
SY3240-5MO-Q
SY3240-5MOU-Q
SY3240-5MOUD-Q
SY3240-5MOZ-Q
SY3240-5MOZ-X90-Q
SY3240-5MOZE-Q
SY3240-5MU-Q
SY3240-5MZ-01F-Q
SY3240-5MZ-Q
SY3240-5MZE-Q
SY3240-5W1Z-Q

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Application	Installation method	Features	Number of Solenoids	Switching Type	Status at Power Off	Voltage	Pipe Port Type	Nominal Pipe Thread Size	Compatible Cylinder Diameter (Ø)	CV Value	Pressure Rating (MPa)	Pilot Air Supply	Manual Switch	Coil specifications	Lead wire electrical entry	Manual	Indicator light / Surge voltage suppressor	Made to order specifications	CE compliant	Valve specifications	Piping connection port diameter
82.10 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Drip-Proof / Lubrication Free	Double	2-Position Exhaust	-	110 V AC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	DIN terminal with connector	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
87.90 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Drip-Proof / Lubrication Free	Double	2-Position Exhaust	-	220 V AC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	DIN terminal with connector	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
79.47 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Drip-Proof / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	DIN terminal with connector	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	Without sub-plate
85.65 €	1	26 Days	Single Use	Direct	Standard / Drip-Proof / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	G	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	DIN terminal with connector	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	With 1/8 sub-plate
88.77 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Drip-Proof / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	DIN terminal with connector	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
68.35 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	[Rc (R)] Rc	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.3 m / Grommet / Lead wire length: 300 mm	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
68.35 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.3 m / Grommet / Lead wire length: 300 mm	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	Without sub-plate
69.85 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.3 m / Grommet / Lead wire length: 300 mm	Non-locking, push type	With surge voltage suppressor	None	Yes	-	Without sub-plate
73.69 €	1	13 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.3 m / Grommet / Lead wire length: 300 mm	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
71.27 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	[Rc (R)] Rc	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.3 m / Grommet / Lead wire length: 300 mm	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
71.27 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.3 m / Grommet / Lead wire length: 300 mm	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
71.27 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	Grommet lead wire 0.3 m / Grommet / Lead wire length: 300 mm	Push-turn locking slotted style	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
84.81 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	[Rc (R)] Rc	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.6 m / Grommet / Lead wire length: 600 mm	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
72.71 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.6 m / Grommet / Lead wire length: 600 mm	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	Without sub-plate
86.29 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	[Rc (R)] Rc	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.6 m / Grommet / Lead wire length: 600 mm	Non-locking, push type	With surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
74.19 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.6 m / Grommet / Lead wire length: 600 mm	Non-locking, push type	With surge voltage suppressor	None	Yes	-	Without sub-plate
78.03 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.6 m / Grommet / Lead wire length: 600 mm	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
75.63 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	[Rc (R)] Rc	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.6 m / Grommet / Lead wire length: 600 mm	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
75.63 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	Grommet lead wire 0.6 m / Grommet / Lead wire length: 600 mm	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
75.63 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	Grommet lead wire 0.6 m / Grommet / Lead wire length: 600 mm	Push-turn locking slotted style	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
71.23 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	G	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector with lead wire 0.3 m / L plug connector / With lead wire (length: 300 mm)	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
71.23 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector with lead wire 0.3 m / L plug connector / With lead wire (length: 300 mm)	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	Without sub-plate
72.71 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector without lead wire	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
81.94 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	[Rc (R)] Rc	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector without connector	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
69.85 €	1	4 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector without connector	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	Without sub-plate
69.85 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	L plug connector without connector	Push-turn locking slotted style	Without indicator light / surge voltage suppressor	None	Yes	-	Without sub-plate
71.32 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	L plug connector without connector	Push-turn locking slotted style	With surge voltage suppressor	None	Yes	-	Without sub-plate
75.18 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	[Rc (R)] Rc	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector without connector	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	With 1/8 sub-plate
87.26 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	G	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector without connector	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	With 1/8 sub-plate
75.00 €	1	4 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector without connector	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
75.13 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	L plug connector without connector	Push-turn locking slotted style	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
76.68 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	L plug connector without connector	Push-turn locking lever style	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
84.85 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	G	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector without connector	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
84.85 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	NPTF	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector without connector	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
72.76 €	1	22 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector without connector	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
72.76 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	L plug connector without connector	Push-turn locking slotted style	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
74.26 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	L plug connector without connector	Push-turn locking lever style	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
72.71 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector with lead wire 0.3 m / L plug connector / With lead wire (length: 300 mm)	Non-locking, push type	With surge voltage suppressor	None	Yes	-	Without sub-plate
76.53 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector with lead wire 0.3 m / L plug connector / With lead wire (length: 300 mm)	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
86.23 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	[Rc (R)] Rc	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector with lead wire 0.3 m / L plug connector / With lead wire (length: 300 mm)	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
86.23 €	1	26 Days	Single Use	Direct	Lubrication Free	Double	2-Position Exhaust	Self-Retaining	24 V DC	NPTF	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector / With lead wire (length: 300 mm)	Non-locking, push type	With indicator light and surge voltage suppressor	None	CE compliant product	SY3000	-
74.15 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	L plug connector with lead wire 0.3 m / L plug connector / With lead wire (length: 300 mm)	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
74.15 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	L plug connector with lead wire 0.3 m / L plug connector / With lead wire (length: 300 mm)	Push-turn locking slotted style	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
75.63 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	L plug connector with lead wire 0.3 m / L plug connector / With lead wire (length: 300 mm)	Push-turn locking lever style	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
71.23 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector with lead wire 0.3 m / M plug connector / With lead wire (length: 300 mm)	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	Without sub-plate
69.85 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector without lead wire	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	Without sub-plate
75.18 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector without lead wire	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
75.18 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	[Rc (R)] Rc	1/8	-	0.24	0.1 to 0.7	Internal	Lock	Standard	M plug connector without lead wire	Push-turn locking slotted style	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	With 1/8 sub-plate
72.76 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector without lead wire	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
69.85 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector without connector	Non-locking, push type	Without indicator light / surge voltage suppressor	None	Yes	-	Without sub-plate
75.00 €	1	4 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector without connector	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
75.18 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	M plug connector without connector	Push-turn locking slotted style	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
72.76 €	1	4 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector without connector	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
75.35 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector without connector	Non-locking, push type	With indicator light and surge voltage suppressor	Main valve fluorine rubber specification	Yes	-	Without sub-plate
74.27 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	M plug connector without connector	Push-turn locking lever style	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
76.53 €	1	23 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector with lead wire 0.3 m / M plug connector / With lead wire (length: 300 mm)	Non-locking, push type	With indicator light / surge voltage suppressor (non-polarized)	None	Yes	-	Without sub-plate
86.23 €	1	26 Days	Single Use	Direct	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	G	1/8	-	0.24	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector with lead wire 0.3 m / M plug connector / With lead wire (length: 300 mm)	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	With 1/8 sub-plate
74.15 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M plug connector with lead wire 0.3 m / M plug connector / With lead wire (length: 300 mm)	Non-locking, push type	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
75.58 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Standard / Lubrication Free	Double	2-Position Exhaust	-	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Lock	Standard	M plug connector with lead wire 0.3 m / M plug connector / With lead wire (length: 300 mm)	Push-turn locking lever style	With indicator light and surge voltage suppressor	None	Yes	-	Without sub-plate
96.89 €	1	26 Days	Unit for Manifold Mounting	Manifold Base	Drip-Proof / Lubrication Free	Double	2-Position Exhaust	Self-Retaining	24 V DC	-	-	-	-	0.1 to 0.7	Internal	Non-Locking	Standard	M8 connector with cable (Length 300 mm)	Non-locking, push type	With indicator light and surge voltage suppressor	None	CE compliant product	SY3000	-

1
2
3
4
5
Next >>

Basic information

Type	Solenoid Valves	Number of Ports	5-Port Valve	Plumbing	Sub-Base Plumbing
Driving Type	Pilot Type Spool	Seal Type	Soft Seal

Configure

1,062Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Application
- Single Use
- Unit for Manifold Mounting
Clear
Installation method
- Direct
- Manifold Base
Clear
Features
- Standard
- Drip-Proof
- Lubrication Free
Clear
Switching Type
- 2-Position Exhaust
- 3-Position Closed Center
- 3-Position Exhaust Center
- 3-Position Pressure Center
Clear
Status at Power Off
- Self-Retaining
- Self-Reset (Spring Return)
- Self-Recovery (Pressure Differential Return)
Clear
Voltage
- 12 V DC
- 24 V DC
- 100 V AC
- 110 V AC
- 200 V AC
- 220 V AC
- 5 V DC
- 6 V DC
- 3 V DC
Clear
Pipe Port Type
- Rc (R)
  - Rc
- NPT
- NPTF
- G
Clear
Nominal Pipe Thread Size
1/8

1/4

3/8

1/2
Clear
Compatible Cylinder Diameter(Ø)
80 or Less

63 or Less

200 or Less

140 or Less
Clear
CV Value
0.18

0.24

0.29

0.44

0.5

0.64

0.71

0.8

0.85

1.1

1.2

1.3

1.7

1.8

2

2.2

2.8

3.3
Clear
Pressure Rating(MPa)
- 0.15 to 0.7
- 0.1 to 0.7
- 0.2 to 0.7
- -0.1 to 0.7
Clear
Pilot Air Supply
- Internal
- External
Clear
Manual Switch
- Non-Locking
- Lock
Clear
Coil specifications
- Standard
- With energy saving circuit
Clear
Lead wire electrical entry
- Grommet lead wire 0.3 m
- L plug connector with lead wire 0.3 m
- M plug connector with lead wire 0.3 m
- Grommet lead wire 0.6 m
- M8 connector without connector cable
- M8 connector with cable (length 1,000 mm)
- M8 connector with cable (Length 300 mm)
- M8 connector with cable (Length 5000 mm)
- M8 connector without connector cable (IEC60947-5-2)
- M12 connector with cable 1,000 mm
- M12 connector with cable 2,000 mm
- M12 connector with cable 5,000 mm
- M12 connector with cable 300 mm
- M12 connector with cable 500 mm
- Grommet / Lead wire length: 300 mm
- L plug connector / With lead wire (length: 300 mm)
- M plug connector / With lead wire (length: 300 mm)
- Grommet / Lead wire length: 600 mm
- DIN43650B standard DIN terminal with connector
- DIN43650B standard DIN terminal without connector
- DIN43650B standard DIN terminal, connector not included
- DIN43650B standard DIN terminal, with connector
- IEC60947-2 compliant / M8 connector / no cable
- DIN terminal / With connector
- DIN terminal / without connector
- DIN terminal with connector
- DIN terminal without connector
- L plug connector / No connector
- L plug connector / without lead wire
- L plug connector without connector
- L plug connector without lead wire
- M plug connector / Without connector
- M plug connector / Without lead wire
- M plug connector without connector
- M plug connector without lead wire
Clear
Manual
- Non-locking, push type
- Push-turn locking hand-operated type
- Push-turn locking lever style
- Push-turn locking screwdriver-operated type
- Push-turn locking slotted style
Clear
Indicator light / Surge voltage suppressor
- With indicator light / surge voltage suppressor (non-polarized)
- With indicator light and surge voltage suppressor
- With indicator light and surge voltage suppressor (non-polar type)
- With surge voltage suppressor
- With surge voltage suppressor (non-polar type)
- With surge voltage suppressor (non-polarized)
- Without indicator light / surge voltage suppressor
Clear
Made to order specifications
IEC 60947-5-2 standard product M8 connector

Main valve fluorine rubber specification

None
Clear
CE compliant
- CE compliant product
- None
- Yes
Clear
Valve specifications
- SY3000
- SY5000
- SY7000
- SY9000
Clear
Piping connection port diameter
With 1/2 sub-plate

With 1/4 sub-plate

With 1/8 sub-plate

With 3/8 sub-plate

Without sub-plate
Clear
Type
- SY3000
- SY5000
- SY7000
- SY9000
Clear
Number of Solenoids
- Single
  - Single
- Double
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

3 Days or Less

4 Days or Less

7 Days or Less

12 Days or Less

13 Days or Less

16 Days or Less

17 Days or Less

22 Days or Less

23 Days or Less
Reset