MMTS Micro Threading Tool

Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Nominal	Pitch, Number of Threading (mm)	Effective Length (mm)	Manufacturer Code	Blade diameter D (φ)	Neck diameter d2 (mm)
245.31 €	1		6 Days	S0.1	0.025	0.15	06-00001-01000	0.066	0.032
223.99 €	1		6 Days	S0.2	0.05	0.31	06-00001-02000	0.14	0.07
175.34 €	1		6 Days	S0.3	0.08	0.48	06-00001-03000	0.2	0.085
140.03 €	1		6 Days	S0.4	0.1	0.61	06-00001-04000	0.28	0.15
119.37 €	1		6 Days	S0.5	0.125	0.77	06-00001-05000	0.35	0.17
150.82 €	1		6 Days	S0.6	0.15	0.93	06-00001-06000	0.43	0.22
100.28 €	1	Available	6 Days	S1.2	0.25	1.6	06-00001-12000	0.93	0.61
100.28 €	1	Available	6 Days	S1.4	0.3	1.9	06-00001-14000	1.08	0.7
139.64 €	1		6 Days	S0.8	0.2	1.24	06-00001-08000	0.58	0.31
110.77 €	1		6 Days	S1	0.25	1.55	06-00001-10000	0.73	0.41
110.77 €	1		6 Days	S1	0.25	3.17	06-00001-10001	0.73	0.41
100.28 €	1	Available	6 Days	S1.2	0.25	3.22	06-00001-12001	0.93	0.61
100.28 €	1	Available	6 Days	S1.4	0.3	3.86	06-00001-14001	1.08	0.7

Screw Types	Other	Tool Material Type	Carbide	Work material	Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Stainless Steel (JIS-SUS) / Quenched and tempered steel (25 to 35 HRC) / Quenched and tempered steel (35 to 45 HRC) / Quenched and tempered steel (45 to 55 HRC) / High Hardness Steel (50-60 HRC) / Tool Steel (Before SKD Hardening) / Copper (Cu) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Titanium Alloy (Ti-6Al-4V, etc) / Thermosetting plastic (bakelite, phenol, etc.) / Thermoplastic plastic (vinyl chloride, nylon, etc.)
Tap Type	Thread cutter	Coating Y/N	Available	Surface Treatment	TiAlN
L(mm)	45	Number of flutes	2	Shank diameter D(φ)	4

Configure

13Suggestion of an applicable part number.

Some specification is not specified yet.

The part number is completed.

Basic Attributes