Condições de filtragem

Estoque
Mostrar apenas artigos em stock

Tool Diameter(mm)

0.56
0.6
0.61
0.62
0.64
0.67
0.68
0.69
0.72
0.78
0.91
0.95
0.97
1
1.11
1.16
1.2
1.36
1.4
1.44
1.5
1.79
1.81
1.93
1.97
2
2.14
2.25
2.27
2.29
2.6
2.66
2.68
2.7
2.71
2.83
2.86
2.88
3.05
3.1
3.12
3.13
3.33
3.4
3.43
3.45
3.47
3.55
3.6
3.63
3.65
3.67
3.7
3.77
4.24
4.26
4.27
4.34
4.45
4.46
4.5
4.53
4.54
4.71
4.77
4.78
4.81
5.12
5.13
5.14
5.19
5.22
5.23
5.25
5.38
5.48
5.61
5.62
5.71
5.81
5.84
6.03
6.2
6.29
6.3
6.33
6.34
6.35
6.39
6.4
6.41
6.44
6.47
6.5
6.53
6.54
6.75
6.88
6.92
7.26
7.32
7.38
7.82
7.85
7.91
7.92
7.93
7.94
7.95
8.09
8.52
8.6
8.83
8.99
9.03
9.06
9.09
9.11
9.18
9.33
9.92
9.94
10.11
10.12
10.13
10.17
10.21
10.31
10.53
10.63
10.95
11.65
11.7
11.71
11.8
11.85
11.9
12.07
12.22
12.4
12.9
12.98
12.99
13.3
13.7
14.1
14.11
14.12
14.15
14.3
14.4
14.8
14.9
14.95
15.3
15.5
15.7
15.8
15.99
16.1
16.25
16.3
16.4
16.5
16.6
16.7
17.01
17.05
17.5
18.01
18.02
18.15
18.2
19.8
21
22.03
25.05
26
28

Shank Type

work material

Groove Length(mm)

Diameter tolerance(mm)

Number of flutes(Sheets)

Full length L(mm)

Bite length T(mm)

Type

Dias de envio estimados

Tudo
Envio possível no próprio dia
Dentro de 6 dias úteis
Dentro de 8 dias úteis
Dentro de 10 dias úteis

EIKOSHA

Handle Reamer HR

Catálogo

Número da peça:

Indefinido. 181 candidatos encontrados.

Informações do produto
Lista de números de peça
Informações detalhadas
Catálogo

Informações do produto

Lista de números de peça

Número de itens

Seguinte

Número da peça

Tool Diameter

(mm)

Shank Type

work material

Groove Length

(mm)

Diameter tolerance

(mm)

Number of flutes

(Sheets)

Full length L

(mm)

Bite length T

(mm)

shank diameter

Shank diameter tolerance

Tool Material Type

Center

Quantidade mínima de encomenda

0.6	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	12	+0.002～+0.007	4	30	2.5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.56	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	12	+0.002～+0.007	4	30	2.5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.61	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	12	+0.002～+0.007	4	30	2.5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.62	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	12	+0.002～+0.007	4	30	2.5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.64	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	12	+0.002～+0.007	4	30	2.5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.67	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	12	+0.002～+0.007	4	30	2.5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.68	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	12	+0.002～+0.007	4	30	2.5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.69	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	12	+0.002～+0.007	4	30	2.5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.72	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	12	+0.002～+0.007	4	30	3	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.78	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	15	+0.002～+0.007	4	35	3	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.91	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	20	+0.002～+0.007	4	40	4	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.95	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	20	+0.002～+0.007	4	40	4	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
0.97	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	20	+0.002～+0.007	4	40	4	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	20	+0.002～+0.007	4	40	4	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.2	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	25	+0.002～+0.007	4	45	5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.4	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	25	+0.002～+0.007	4	50	5	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.5	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	25	+0.002～+0.007	4	50	5	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.11	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	25	+0.002～+0.007	4	45	5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.16	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	25	+0.002～+0.007	4	45	5	2	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.36	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	25	+0.002～+0.007	4	50	5	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.44	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	25	+0.002～+0.007	4	50	5	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.79	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	30	+0.002～+0.007	4	55	6	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.81	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	30	+0.002～+0.007	4	55	6	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.93	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	30	+0.002～+0.007	4	60	6	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
1.97	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	30	+0.002～+0.007	4	60	6	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	30	+0.002～+0.007	4	60	6	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.6	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	35	+0.002～+0.007	4	65	7	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.7	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	35	+0.002～+0.007	4	65	7	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.14	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	30	+0.002～+0.007	4	60	6	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.25	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	30	+0.002～+0.007	4	60	7	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.27	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	35	+0.002～+0.007	4	65	7	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.29	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	35	+0.002～+0.007	4	65	7	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.66	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	35	+0.002～+0.007	4	65	7	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.68	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	35	+0.002～+0.007	4	65	7	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.71	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	35	+0.002～+0.007	4	65	7	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.83	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	35	+0.002～+0.007	4	65	7	3	-0.02～-0.05	High-speed steel	60° Convex	1 unidades
2.86	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.002～+0.007	6	72	8	3	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
2.88	End Mill Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.002～+0.007	6	72	8	3	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
-	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]	65	+0.006 to +0.012	6	125	13	3/8 inch	-	-	60° Concave	1 unidades
3.05	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	72	8	3.05	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.1	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	72	8	3.1	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.4	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	75	8	3.4	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.6	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	75	8	3.6	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.7	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	80	8	3.7	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.12	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	75	8	3.12	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.13	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	75	8	3.13	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.33	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	75	8	3.33	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.43	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	75	8	3.43	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.45	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	75	8	3.45	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.47	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	75	8	3.47	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.55	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	75	8	3.55	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.63	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	80	8	3.63	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.65	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	80	8	3.65	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.67	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	80	8	3.67	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
3.77	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	40	+0.004～+0.009	6	80	8	3.77	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
4.5	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	45	+0.004～+0.009	6	85	9	4.5	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
4.24	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	45	+0.004～+0.009	6	85	9	4.24	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
4.26	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	45	+0.004～+0.009	6	85	9	4.26	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
4.27	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	45	+0.004～+0.009	6	85	9	4.27	-0.02～-0.05	High-speed steel	60° Concave	1 unidades
4.34	Straight Shank	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]	45	+0.004～+0.009	6	85	9	4.34	-0.02～-0.05	High-speed steel	60° Concave	1 unidades

Preço unitário (excluindo IVA)(Preço unitário incluindo IVA)	Data de envio standard

63.36 €31.68 € ( 37.70 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
97.77 € ( 116.35 € )	6 dias úteis
95.19 € ( 113.28 € )	6 dias úteis
95.19 € ( 113.28 € )	10 dias úteis
95.19 € ( 113.28 € )	6 dias úteis
95.19 € ( 113.28 € )	6 dias úteis
95.19 € ( 113.28 € )	6 dias úteis
95.19 € ( 113.28 € )	6 dias úteis
87.49 € ( 104.11 € )	6 dias úteis
87.49 € ( 104.11 € )	10 dias úteis
80.63 € ( 95.95 € )	6 dias úteis
80.63 € ( 95.95 € )	10 dias úteis
80.63 € ( 95.95 € )	6 dias úteis
46.50 €23.72 € ( 28.23 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
45.73 €22.87 € ( 27.22 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
52.30 € ( 62.24 € )	10 dias úteis
41.10 €20.55 € ( 24.45 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
68.63 € ( 81.67 € )	6 dias úteis
68.63 € ( 81.67 € )	10 dias úteis
68.58 € ( 81.61 € )	6 dias úteis
68.58 € ( 81.61 € )	6 dias úteis
51.83 €19.70 € ( 23.44 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
51.83 €26.43 € ( 31.45 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
60.88 € ( 72.45 € )	6 dias úteis
60.88 € ( 72.45 € )	6 dias úteis
38.04 €19.02 € ( 22.63 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
38.05 €19.03 € ( 22.65 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
38.05 €19.03 € ( 22.65 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
52.30 € ( 62.24 € )	10 dias úteis
45.71 €22.86 € ( 27.20 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
52.30 € ( 62.24 € )	10 dias úteis
52.30 € ( 62.24 € )	6 dias úteis
52.32 € ( 62.26 € )	6 dias úteis
52.32 € ( 62.26 € )	6 dias úteis
52.32 € ( 62.26 € )	6 dias úteis
52.32 € ( 62.26 € )	6 dias úteis
44.60 € ( 53.07 € )	6 dias úteis
44.60 € ( 53.07 € )	6 dias úteis
78.91 € ( 93.90 € )	6 dias úteis
34.99 €16.45 € ( 19.58 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
30.03 € ( 35.74 € )	6 dias úteis
28.09 €13.76 € ( 16.37 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
28.10 €14.05 € ( 16.72 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
28.11 €14.06 € ( 16.73 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
38.61 € ( 45.95 € )	6 dias úteis
38.61 € ( 45.95 € )	6 dias úteis
38.62 € ( 45.96 € )	6 dias úteis
38.62 € ( 45.96 € )	6 dias úteis
38.62 € ( 45.96 € )	6 dias úteis
38.62 € ( 45.96 € )	6 dias úteis
35.00 €17.50 € ( 20.82 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
38.64 € ( 45.98 € )	6 dias úteis
35.01 €17.51 € ( 20.84 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
38.64 € ( 45.98 € )	6 dias úteis
38.64 € ( 45.98 € )	6 dias úteis
28.14 €14.07 € ( 16.74 € )	Item em stock: 1 dia útilDisponível para envio no próprio dia
38.66 € ( 46.01 € )	10 dias úteis
38.66 € ( 46.01 € )	10 dias úteis
38.66 € ( 46.01 € )	6 dias úteis
38.66 € ( 46.01 € )	6 dias úteis

Seguinte

Informações detalhadas

Informações básicas

Informações básicas

General-purpose straight reamer (HSS) with straight edge that can be hand turned.
[Features]
· The shank has an angle and can be hand turned.
· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.
· Blade tip diameter: Available from 0.5 to 60.
· Shank type: Available in end mill shank and straight shank.
· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.
· Material: SKH51. Right-blade Straight, Bite Angle: 1°.
[Applications]
· Optimal for general purpose finishing.

Catálogo

Catálogo (visualização de 2 páginas)