IC Drawing Jig
- Volume Discount
Tweezers that can securely hold 8 to 42-pin IC in the upright direction.
[Features]
· Can clamp 8 to 42-pin IC in the upright direction and pull out the pins simultaneously.
· Securely keep the clamped IC in the same state by screwing in a knurled screw.
[Applications]
· Work around the substrate.
· Removing IC parts.
[Features]
· Can clamp 8 to 42-pin IC in the upright direction and pull out the pins simultaneously.
· Securely keep the clamped IC in the same state by screwing in a knurled screw.
[Applications]
· Work around the substrate.
· Removing IC parts.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SS-08
Basic information
| Material | Stainless Steel | Product Type | IC drawing tool/pin removing tool | Properties | Standard Type |
|---|---|---|---|---|---|
| Overall Length(mm) | 125 | Number of Pins | 8～42 | Trusco Code | 302-7210 |
| Features | IC of pins 8 to 42 can be clamped onto and pulled out all at once. The IC can be held in place depending on the tightness of the knurled screws. | Application | IC parts removal. | Mass(g) | 32 |
| Amount Of Content | 1 pc. |
This page is IC Drawing Jig, part number SS-08.
You can find the detail information about specifications and dimensions on part number SS-08.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.