Ion Parts Cleaner IPC-A3
* Equipped with two ionzing nozzles N-1, blowing air downward from the top side of the hood.
* Eliminates static electricity and removes dust with air controlled by an infrared sensor.
* Time to stop ion blow after sensing a workpiece by a sensor is settable. (1, 3, 5, 10, or 30 sec)
* Adhesive gel collects blown-off dust assuredly.
* Dust on the adhesive gel mat can be washed off with water and the gel mat can be used repeatedly.
* Dust collector is not required; This reduces power consumption significantly and, in the end, the total running cost. Moreover, pulse blow also cuts the amount of air usage.
* In the pulse mode, air is blown intermittently, exerting force of blowing off dust by vibration. It allows low- and high-speed pulses to be selected according to workpiece.
* Incorporates an air regulator.
* Eliminates static electricity and removes dust with air controlled by an infrared sensor.
* Time to stop ion blow after sensing a workpiece by a sensor is settable. (1, 3, 5, 10, or 30 sec)
* Adhesive gel collects blown-off dust assuredly.
* Dust on the adhesive gel mat can be washed off with water and the gel mat can be used repeatedly.
* Dust collector is not required; This reduces power consumption significantly and, in the end, the total running cost. Moreover, pulse blow also cuts the amount of air usage.
* In the pulse mode, air is blown intermittently, exerting force of blowing off dust by vibration. It allows low- and high-speed pulses to be selected according to workpiece.
* Incorporates an air regulator.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
IPC-A3
IPC-A3 Ion Parts Cleaner
Product Information
A3 size is ideal for capturing dust with adhesive urethane gel at cell workbench
► With no built-in dust collector, its power consumption is substantially reduced.
► Dislodged dust will be collected by the adhesive gel sheets.
► A paper pack filter can be attached to the exhaust port on the rear side (standard).
 |  |
| Regulator Built-in | Filter to Duct: Replaceable |
Specifications
| Model No. | IPC-A3 |
| Ionizing method/Applied voltage | Piezoelectric high frequency AC corona discharge / 5.6kVAC (p-p) |
| Power supply | DC24V±5% |
| Current consumption | 900mA or less |
| Dust collection airflow | 1.13 m3/min (Built-in fan) |
| Static pressure | 460Pa (Built-in fan) |
| Dust collection filter | Self-adhesive polyurethane gel sheets and paper pack filter |
| HxWxDmm | H411 xW420xD300mm |
| Weight | 9.5kg |
| Air supply hose diameter | Tube fitting 10mm |
| Operating fluid | Clean dry air (0.1 to 0.6MPa) |
| Air Consumption | 315ℓ/min(0.3MPa, Continuous mode) |
| Ozone production | 0.05ppm or less (measured 50mm) |
| Operating environment temperature and humidity | 5 to 40°C / 35 to 65% RH (with no dew condensation or freezing) |
| Accessories | AC adapter, Adhesive gel sheet plate |
| (included with device) x 2pcs, Duct flange (for φ 75mm), | |
| Paper pack filter (6pcs) |
Accessories
 | Adhesive gel sheet (1 pc) IPC-A4G EDP No. 806091 |  | AC Adapter AD-24-IT19 EDP No. 806081 I/P: AC100V-240V 1.2A O/P : DC24V 1.9A (AD24-IT19E is available on request.) |  | Paper pace filter (6pc.) IPC-A3F |
Part Number
|
|---|
| IPC-A3 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Amount Of Content | |
|---|---|---|---|---|---|
2,692.17 € | 1 | 5 Days | 1 unit |
Loading...
Basic information
| Product Type | Unit Type | Type | AC System | Input Power Supply(V) | DC24V±5％ |
|---|---|---|---|---|---|
| Current Consumption(mA) | 900 | Width(mm) | 420 | Depth(mm) | 300 |
| Height(mm) | 411 | Power Consumption(W) | 22 | Mass(g) | 9500 |
| Air Fitting | Tube joint 10 mmφ | Ozone Generation Amount | 0.05 ppm or less (50 mm) | Dust Collector Air Capacity(m³/min) | 1.13 |
| Operating Temperature | 5～40°C | Operating Humidity | 35 to 65% RH (with no condensation/freezing) | Applicable Fluids | Clean Air (0.1 to 0.7 MPa) |
| Air consumption flow rate | 300(ℓ/min) | Amount Of Content | 1 unit |
This page is Ion Parts Cleaner IPC-A3, part number IPC-A3.
You can find the detail information about specifications and dimensions on part number IPC-A3.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.