Condições de filtragem

work material
Nose R
1.2
Other
Other
Groove Width (For Grooving / Plunging)
Material type
Chip Breaker Manufacturer
- RM
- RO
Specifications
- Intermediate feeding
- Low Feed
Groove Width Tolerance
- ±0.02
- +0.10/0
Other Nose R(mm)
- 1
- 1.5
- 1.59
- 1.98
- 2
- 2.25
- 2.38
- 2.5
- 3
- 3.18
- 3.57
- 4
- 400
Maximum Cutting(mm)
- 18.10
- 18.60
- 18.70
- 19
- 19.2
- 21.60
- 22.00
- 22.2
- 22.70
- 22.80
- 22.90
- 23.00
- 23.10
- 23.3
- 27.00
- 27.3
Sheet size
- E
- F
- G
- H
- J
- K
- L
Type
- N123-RM
- N123-RO
Dias de envio estimados
- Tudo
- Dentro de 6 dias úteis
- Dentro de 8 dias úteis

CoroCut 1 / 2 For Profiling

Número da peça:

Indefinido. 46 candidatos encontrados.

Lista de números de peça
Informações detalhadas

Lista de números de peça

Número de itens

Número da peça

work material

Nose R

Groove Width (For Grooving / Plunging)

Material type

Chip Breaker Manufacturer

Specifications

Groove Width Tolerance

Other Nose R

(mm)

Maximum Cutting

(mm)

Sheet size

Quantidade mínima de encomenda

Heat-resistant alloy, titanium alloy	[Other] Other	2.00 mm	S05F	RO	Low Feed	±0.02	1	19.2	E	10 unidades
Heat-resistant alloy, titanium alloy	1.2	2.39 mm	S05F	RO	Low Feed	±0.02	-	19	E	10 unidades
Steel / Stainless Steel	[Other] Other	3.00 mm	GC2135	RM	Intermediate feeding	+0.10/0	1.5	18.60	F	10 unidades
Steel / Cast Iron	[Other] Other	3.00 mm	GC3115	RM	Intermediate feeding	+0.10/0	1.5	18.60	F	10 unidades
Steel	[Other] Other	3.00 mm	CT525	RM	Intermediate feeding	+0.10/0	1.5	18.60	F	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	[Other] Other	3.00 mm	GC1125	RO	Low Feed	±0.02	1.5	18.70	F	10 unidades
Heat-resistant alloy, titanium alloy	[Other] Other	3.00 mm	S05F	RO	Low Feed	±0.02	1.5	18.70	F	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal	[Other] Other	3.18 mm	GC1125	RM	Intermediate feeding	+0.10/0	1.59	18.60	F	10 unidades
Steel / Stainless Steel	[Other] Other	3.18 mm	GC2135	RM	Intermediate feeding	+0.10/0	1.59	18.60	F	10 unidades
Steel / Cast Iron	[Other] Other	3.18 mm	GC3115	RM	Intermediate feeding	+0.10/0	1.59	18.60	F	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	[Other] Other	3.18 mm	GC1125	RO	Low Feed	±0.02	1.59	18.60	F	10 unidades
Heat-resistant alloy, titanium alloy	[Other] Other	3.18 mm	S05F	RO	Low Feed	±0.02	1.59	18.60	F	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal	[Other] Other	4.00 mm	GC1125	RM	Intermediate feeding	+0.10/0	2	18.10	G	10 unidades
Steel / Cast Iron	[Other] Other	4.00 mm	GC2135	RM	Intermediate feeding	+0.10/0	2	18.10	G	10 unidades
Steel / Cast Iron	[Other] Other	4.00 mm	GC3115	RM	Intermediate feeding	+0.10/0	2	18.10	G	10 unidades
Steel	[Other] Other	4.00 mm	CT525	RM	Intermediate feeding	+0.10/0	2	18.10	G	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	[Other] Other	3.96 mm	GC1125	RO	Low Feed	±0.02	1.98	23.3	H	10 unidades
Heat-resistant alloy, titanium alloy	[Other] Other	3.96 mm	S05F	RO	Low Feed	±0.02	1.98	23.3	H	10 unidades
Steel / Cast Iron	[Other] Other	4.00 mm	GC3115	RO	Intermediate feeding	+0.10/0	2	23.10	H	10 unidades
Heat-resistant alloy, titanium alloy	[Other] Other	4.00 mm	S05F	RO	Low Feed	±0.02	2	23.3	H	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	[Other] Other	4.50 mm	GC1125	RO	Low Feed	±0.02	2.25	23.00	H	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal	[Other] Other	4.75 mm	GC1125	RM	Intermediate feeding	+0.10/0	2.38	22.90	H	10 unidades
Steel / Cast Iron	[Other] Other	4.75 mm	GC3115	RM	Intermediate feeding	+0.10/0	2.38	22.90	H	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	[Other] Other	4.75 mm	GC1125	RO	Low Feed	±0.02	2.38	22.90	H	10 unidades
Heat-resistant alloy, titanium alloy	[Other] Other	4.75 mm	S05F	RO	Low Feed	±0.02	2.38	22.90	H	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal	[Other] Other	5.00 mm	GC1125	RM	Intermediate feeding	+0.10/0	2.5	22.70	H	10 unidades
Steel / Stainless Steel	[Other] Other	5.00 mm	GC2135	RM	Intermediate feeding	+0.10/0	2.5	22.70	H	10 unidades
Steel / Cast Iron	[Other] Other	5.00 mm	GC1125	RM	Intermediate feeding	+0.10/0	2.5	22.70	H	10 unidades
Stainless Steel / Heat-resistant alloy, titanium alloy	[Other] Other	5.00 mm	GC1005	RO	Low Feed	±0.02	2.5	22.80	H	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	[Other] Other	5.00 mm	GC1125	RO	Low Feed	±0.02	2.5	22.80	H	10 unidades
Steel / Stainless Steel	[Other] Other	5.00 mm	GC2135	RO	Low Feed	±0.02	2.5	22.80	H	10 unidades
Heat-resistant alloy, titanium alloy	[Other] Other	5.00 mm	S05F	RO	Low Feed	±0.02	2.5	22.80	H	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal	[Other] Other	6.00 mm	GC1125	RM	Intermediate feeding	+0.10/0	3	22.2	J	10 unidades
Steel / Cast Iron	[Other] Other	6.00 mm	GC3115	RM	Intermediate feeding	+0.10/0	3	22.2	J	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	[Other] Other	6.00 mm	GC1125	RO	Low Feed	±0.02	3	22.2	J	10 unidades
Heat-resistant alloy, titanium alloy	[Other] Other	6.00 mm	S05F	RO	Low Feed	±0.02	3	22.2	J	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal	[Other] Other	6.35 mm	GC1125	RM	Intermediate feeding	+0.10/0	3.18	22.00	J	10 unidades
Steel / Cast Iron	[Other] Other	6.35 mm	GC3115	RM	Intermediate feeding	+0.10/0	3.18	22.00	J	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	[Other] Other	6.35 mm	GC1125	RO	Low Feed	±0.02	3.18	22.00	J	10 unidades
Heat-resistant alloy, titanium alloy	[Other] Other	6.35 mm	S05F	RO	Low Feed	±0.02	3.18	22.00	J	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	[Other] Other	7.14 mm	GC1125	RO	Low Feed	±0.02	3.57	21.60	K	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal	[Other] Other	8.00 mm	GC1125	RM	Intermediate feeding	+0.10/0	4	27.00	L	10 unidades
Steel / Stainless Steel	[Other] Other	8.00 mm	GC2135	RM	Intermediate feeding	+0.10/0	4	27.00	L	10 unidades
Steel / Cast Iron	[Other] Other	8.00 mm	GC3115	RM	Intermediate feeding	+0.10/0	4	27.00	L	10 unidades
Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	[Other] Other	8.00 mm	GC1125	RO	Low Feed	±0.02	400	27.3	L	10 unidades
Heat-resistant alloy, titanium alloy	[Other] Other	8.00 mm	S05F	RO	Low Feed	±0.02	400	27.3	L	10 unidades

Preço unitário (excluindo IVA)(Preço unitário incluindo IVA)	Data de envio standard

61.03 € ( 72.63 € )	8 dias úteis
61.03 € ( 72.63 € )	8 dias úteis
46.70 € ( 55.57 € )	8 dias úteis
45.91 € ( 54.63 € )	6 dias úteis
44.26 € ( 52.67 € )	8 dias úteis
57.92 € ( 68.92 € )	6 dias úteis
62.75 € ( 74.67 € )	8 dias úteis
50.44 € ( 60.02 € )	6 dias úteis
45.91 € ( 54.63 € )	8 dias úteis
45.91 € ( 54.63 € )	6 dias úteis
60.10 € ( 71.52 € )	8 dias úteis
62.75 € ( 74.67 € )	6 dias úteis
52.30 € ( 62.24 € )	6 dias úteis
49.22 € ( 58.57 € )	8 dias úteis
50.08 € ( 59.60 € )	8 dias úteis
49.22 € ( 58.57 € )	6 dias úteis
68.46 € ( 81.47 € )	6 dias úteis
71.62 € ( 85.23 € )	6 dias úteis
53.17 € ( 63.27 € )	8 dias úteis
71.62 € ( 85.23 € )	8 dias úteis
68.46 € ( 81.47 € )	8 dias úteis
57.44 € ( 68.35 € )	8 dias úteis
52.27 € ( 62.20 € )	6 dias úteis
68.46 € ( 81.47 € )	6 dias úteis
71.62 € ( 85.23 € )	6 dias úteis
56.13 € ( 66.79 € )	8 dias úteis
52.27 € ( 62.20 € )	8 dias úteis
52.27 € ( 62.20 € )	8 dias úteis
63.68 € ( 75.78 € )	8 dias úteis
69.61 € ( 82.84 € )	8 dias úteis
62.20 € ( 74.02 € )	8 dias úteis
71.62 € ( 85.23 € )	8 dias úteis
58.57 € ( 69.70 € )	6 dias úteis
56.27 € ( 66.96 € )	8 dias úteis
69.69 € ( 82.93 € )	6 dias úteis
75.60 € ( 89.96 € )	6 dias úteis
60.75 € ( 72.29 € )	8 dias úteis
55.32 € ( 65.83 € )	6 dias úteis
72.30 € ( 86.04 € )	6 dias úteis
76.53 € ( 91.07 € )	6 dias úteis
75.75 € ( 90.14 € )	8 dias úteis
76.00 € ( 90.44 € )	8 dias úteis
69.11 € ( 82.24 € )	8 dias úteis
69.11 € ( 82.24 € )	8 dias úteis
91.99 € ( 109.47 € )	8 dias úteis
91.75 € ( 109.18 € )	8 dias úteis

Informações detalhadas

Informações básicas

Informações básicas

[Features]
CoroCut 2 inserts
Solid carbide-coated tip
For parting and grooving
The rail lock provides high clamp rigidity
2-cutting-edge specification
For grooving
For low-feed machining
Seat size: F
Width: 3.0 mm
Full R