GT Diamond Cutter

Click on this image to zoom in.

Volume Discount

[Features]
Lineup: A segmented type designed with an emphasis on speed (NDC-105S), A wave type designed with an emphasis on the cut section (NDC-105W); Outer diameter: 105 mm; Hole diameter: 20 mm (with 15-mm washer); Maximum rotational speed: 14,500 min-1
[Applications]
· Concrete, bricks, block, mortar, etc.

(i)Remark

Match the arrow with the rotational direction of the power tool. Check that there are no bends, cracks or chips on the product. Check that there is no rattling or wobbling after attaching the product. Check that there are no abnormal sounds or vibrations by turning the disk without any load after attaching. If you notice any abnormal sounds or vibrations during work, stop work immediately. Cannot be used for metals, woodwork or for polishing flat surfaces. Use at or below the maximum rotational speed of 14,500 min-1. If there is clogging or the sharpness has deteriorated, sharpen the product using soft materials such as a GC-type grind stone or brick.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
NDC-105S
NDC-105W

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Wheel Type	Blade thickness (mm)	JAN code
	12.07 €	2	Available	8 Days	Segment Type	1.8	4904781386376
	20.07 €	2	Available	6 Days	Wave Type	2	4904781386383

Basic information

Product Type	Diamond cutter	Specifications	Dry Type	Application	For concrete, mortar / Tile
Outer Diameter(mm)	105	Hole Diameter(mm)	20 (with 15-mm washer)	Package depth(mm)	160
Package width(mm)	130	Package height(mm)	5	Maximum rotational speed(min^-1⁾	14,500
Package weight(g)	114